Philips SCD570 User manual

IT Manuale utente 169
NL Gebruiksaanwijzing 193
NO Brukerhåndbok 217
PT Manual do utilizador 240
SV Användarhandbok 264
TR Kullanımkılavuzu 286
AR 327
EN Usermanual 3
DA Brugervejledning 25
DE Benutzerhandbuch 47
EL Εγχειρίδιοχρήσης 72
ES Manual del usuario 99
FI Käyttöopas 123
FR Moded’emploi 145
Always here to help you
Register your product and get support at
www.philips.com/welcome
SCD570

2

3
9 Cleaning and maintenance 21
10 Storage 22
11 Ordering accessories 22
12 Guarantee and support 22
13 Frequently asked questions 22
1 Introduction
Congratulations on your purchase and welcome

that Philips AVENT offers, register your product at
www.philips.com/welcome.
Philips AVENT is dedicated to producing caring,
reliable products that give parents the reassurance
they need.This Philips AVENT baby monitor provides
round-the-clock support by ensuring you can always
hear your baby clearly without any distracting noise.
The DECT technology guarantees zero interference
and a crystal clear sound between the baby unit and
the parent unit.The temperature sensor enables you
to monitor the temperature in your baby’s room, and
offers you personalised settings to help keep your
baby’s room comfortable.
2 Product overview
•I. Display
1 Signal strength indicator
2 Eco Max indicator
3 Night dim mode symbol
4 Cry alert indicator
5 Mute symbol
6 Battery status indicator
7 Navigation arrow
8 Temperature symbol
 
10 Microphone sensitivity indicator
11 Nightlight symbol
12 Lullaby symbol
13 Timer or timer repeat symbol
Table of contents
1 Introduction 3
2 Product overview 3
3 Preparing for use 4
3.1 Baby unit 4
3.2 Parent unit 5
4 Using the baby monitor 6
4.1 Positioningthebabymonitor 6
4.2 Linking parent unit and baby unit 7
5 Functions and feedback on the
baby unit 8
5.1 Nightlight 8
5.2 Lullabyfunction 8
5.3 Paging the parent unit 9
5.4 Battery status light 10
6 Functions and feedback on the
parent unit 10
6.1 Volume 10
6.2 Talk function 11
6.3 Nightdimmode 11
6.4 Baby unit battery low alert 12
6.5 Battery status indications 12
6.6 Signal strength indicator 14
6.7 Reset 14
7 Menu of the parent unit 14
7.1 Navigatingthemenu 14
7.2 Sensitivity 15
7.3 EcoMaxmode 16
7.4 Nightlight 16
7.5 Lullaby 17
7.6 Feedtimer 17
7.7 Temperature 18
7.8 Cryalert 19
7.9 Clock 20
7.10 Language 20
7.11 Key lock 20
8 Neck strap 21
ENGLISH

4
3 Preparing for use
IMPORTANT: Read the safety instructions
carefully before you use the baby monitor
and keep them for future reference.
3.1 Baby unit
Use the baby unit from the mains.To guarantee
automatic power backup in case of mains failure,
we advise you to insert non-rechargeable
batteries.
3.1.1 Mains operation
1 Put the adapter in a wall socket and insert
the small appliance plug into the baby unit.
3.1.2 Placing the non-rechargeable batteries
In case of mains failure the baby unit can run on
four 1.5V R6 AA alkaline batteries (not included).
Do not use rechargeable batteries.The baby
unit does not have a charging function and
rechargeable batteries discharge slowly when
they are not in use.
BWarning:
Unplugthebabyunitandmakesureyour
hands and the unit are dry when you insert
non-rechargeable batteries.
DNote:
We advise you to use the baby unit on mains
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries.The operating time on non-rechargeable
batteries is 24 hours.
II. Parent unit
1 On/off button
2 TALK button
3 Night dim button
4 - button
5 Microphone
6 ’link’ light
7 Display
8 Sound level lights
9 MENU button
10 + button
11 Battery status light
12 OK button
13 Handgrip/attachment hole for neck strap
14 Compartment for rechargeable batteries
15 Lid of compartment for rechargeable
batteries
16 Connection points for charging
17 Rechargeable batteries
18 Neck strap
19 Socket for small plug of adapter
20 Charger
21 Small plug of adapter
22 Adapter
•III. Baby unit
1 Nightlight and nightlight on/off button
2 Power-on light
3 FIND button
4 Microphone
5 Next lullaby button
6 Lullaby play/stop button
7 On/off button
8 Volume + button
9 Battery status light
10 Volume - button
11 Temperature sensor
12 Loudspeaker
13 Socket for small plug of adapter
14
Compartment for non-rechargeable batteries
15 Lid of compartment for non-rechargeable
batteries
16 Small plug of adapter
17 Adapter

5
3.2 Parent unit
The parent unit runs on two rechargeable
batteries that are supplied with the baby monitor.
3.2.1 Inserting the rechargeable batteries
1 Slide the lid of the compartment for the
rechargeable batteries off the parent unit.
2 Insert the rechargeable batteries.
DNote:
Make sure the + and - poles of the batteries
point in the right direction.
1 Push the lock to release the lid of the
compartment for non-rechargeable
batteries and remove the lid.
2 Insert four non-rechargeable batteries.
DNote:
Make sure the + and - poles point in the
right direction.
3  
the openings in the rim of the compartment
for non-rechargeable batteries.
4 Then push down the lid until the lock
closes with a click.
ENGLISH

6
•The display goes on and the battery status
indications show that the parent unit is
charging. For battery status indications,
see ‘Battery charge indications’ in chapter
‘Functions and feedback on the parent unit’.
3 Leave the parent unit in the plugged-in
charger until the rechargeable batteries
are fully charged.
DNote:
When you start using the baby monitor, it takes
four charge and discharge cycles before the
rechargeable batteries reach their full capacity.
4 Using the baby
monitor
4.1 Positioning the baby
monitor
BWarning:
Keep the baby unit out of the reach of the baby.
Never place the baby unit inside the baby’s bed
or playpen.
1 Because the cord of the baby unit presents
a potential strangulation hazard, make sure
that the baby unit and its cord are at least
1 metre/3.5 feet away from your baby.
2 To prevent a high-pitched sound from one or
both units, make sure the parent unit is at least
1 metre/3.5 feet away from the baby unit.
3 Slide the lid of the compartment for the
rechargeable batteries back onto the parent
unit. Push the lid home until it locks into place
with a click.
3.2.2 Charging the parent unit
Charge the parent unit before you use it for the

the batteries are low.
Important:You have to charge the parent
unit for the full 10 hours to have a cordless
operating time of 18 hours.
1 Insert the small appliance plug of the adapter
in the socket on the back of the charger.
Put the adapter in a wall socket.
2 Put the parent unit in the charger.

7
•The display goes on and briey displays all
indicators and symbols.Then the indicators
and symbols fade out and the battery status
indicator appears.
DNote:
When you switch on the parent unit for

to select your preferred display language
(see ‘Language’ in chapter ‘Menu of the
parent unit’).
•The ‘link’ light on the parent unit starts
ashing red and the message ‘I AM
LINKING’ appears on the display.
•When the parent unit and baby unit are
linked, the ‘link’ light turns solid green.
The signal strength indicator and the
message ‘LINKED’ appear on the display.
•If no connection is established within
10 seconds, the message ‘NOT LINKED’ on
the display alternates with ‘I AM LINKING’.
If still no connection is established after
30 seconds, the parent unit starts to
beep and only the message ‘NOT LINKED’
is shown.
4.2 Linking parent unit and
baby unit
1 Press and hold the on/off button 3on
the baby unit for 2 seconds.
•The nightlight, the battery status light
and the power-on light go on briey.
2 Press and hold the on/off button 3on
the parent unit for 2 seconds.
ENGLISH

8
Dry materials Material
thickness
Loss of
range
Metal or aluminium
sheets
< 1cm
(0.4in)
100%
5 Functions and
feedback on the
baby unit
5.1 Nightlight
The nightlight produces a soft glow that comforts
your baby.
1 Press the nightlight on/off button on the baby
unit to switch on the nightlight.
•Qappears on the display of the parent unit.
2 Press the nightlight on/off button again to
switch off the nightlight.
•The nightlight dims gradually before it goes
out completely.
•Q
disappears from the display of the parent unit.
5.2 Lullaby function
1 Press the lullaby play/stop button Kon the
baby unit to play the last selected lullaby.
What to do if no link is established
•The parent unit may be out of range
of the baby unit. Place the parent unit
closer to the baby unit, but not closer
than 1 metre/3.5 feet.
•The baby unit or the parent unit may
lose connection because it is too
close to another DECT appliance
(e.g. a cordless phone). Switch off this
DECT appliance or place the unit
further away from this appliance.
•The baby unit may be switched off.
Switch on the baby unit.
4.2.1 Operating range
•The operating range is 330 metres/1000 feet
outdoors and up to 50 metres/150 feet indoors.
•The operating range of the baby monitor
varies depending on the surroundings and
factors that cause interference.Wet and moist
materials cause so much interference that
the range loss is up to 100%. For interference
from dry materials, see table below
Dry materials Material
thickness
Loss of
range
Wood, plaster,
cardboard, glass
(without metal,
wires or lead)
< 30cm
(12in)
0-10%
Brick, plywood < 30cm
(12in)
5-35%
Reinforced concrete < 30cm
(12in)
30-100%
Metal grilles or bars < 1cm
(0.4in)
90-100%

9
5.3 Paging the parent unit
If you have lost the parent unit, you can use
the FIND button on the baby unit to locate
the parent unit.
DNote:
The paging function only works when the
parent unit is switched on.
1 Press the FIND button on the baby unit.
•The message ‘PAGING’ appears on the
display of the parent unit and the parent
unit produces a paging alert tone.
2 To stop the paging alert tone, press the
FIND button on the baby unit again or
press any button on the parent unit.
DNote:
The paging alert tone stops automatically
after 2 minutes.
•The selected lullaby repeats for 15 minutes.
•If no lullaby was selected before, lullaby 1
is played.
2 Press the next lullaby button to select
another lullaby from the list.
•If no lullaby is playing, the last selected
lullaby starts playing when you press the
next lullaby button .
•When you press the next lullaby button
while a lullaby is playing, the next lullaby
starts playing.
3 To adjust the sound level of the lullaby, press
the volume + or the volume – button on the
baby unit.
DNote:
You can only set the loudspeaker volume on the
baby unit when a lullaby is playing. If you have
set the volume for the lullaby higher on the baby
unit, the sound will also be louder when you
use the talk function on the parent unit.
4 To stop lullaby playing, press the lullaby
play/stop button Kon the baby unit.
ENGLISH

10
6 Functions and
feedback on the
parent unit
6.1 Volume
The volume can be set if the menu is not active.
There are seven volume levels and a ‘volume off’
setting.
6.1.1 Setting the volume level
1 Press the + button or the - button once.
•The current volume level appears on the
display.
2 Press the + button to increase the volume
or press the - button to decrease the volume.
•The parent unit beeps at every volume step
•At maximum volume, the parent unit gives
two beeps.
•If no button is pressed for more than
2 seconds, the volume level indication
disappears and the volume setting is saved.
6.1.2 Volume off
Below the lowest volume setting, there is a
‘volume off’ setting.
1 Press the + button or the - button once.
•The current volume level appears on the
display.
2 Press and hold the - button for more than
2 seconds to set the volume to off.
•The message ‘MUTE’ and the mute symbol
appear on the display.
5.4 Battery status light
1 The battery status light is solid green when
the baby unit runs on battery power and
the batteries contain enough energy.
2  
when the batteries run low while the baby
unit is running on battery power.
•Replace the batteries when they run low.
•If the batteries run out of power while the
baby unit is running on battery power, the
baby unit switches off and the parent unit
loses connection with the baby unit.
DNote:
We advise you to use the baby unit on mains
power, as the baby unit has a limited operating
time when you use it on non-rechargeable alkaline
batteries.The operating time on non-rechargeable
batteries is 24 hours.