Philips HR1720/AC User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Blender
HR1720/AC
HR1721/AC
HR1724/AC
HR1727/AC
04/12
PRODUCT INFORMATION
HR1720/AC = Basic Blender
HR1721/AC = HR1720/AC + Mill accessory HR2944
HR1724/AC = HR1720/AC + Soyabean / Fruitfilter HR2938
HR1727/AC = HR1720/AC + Mill accessory HR2944
+ Soyabean / Fruitfilter HR2938
TECHNICAL INFORMATION
- Motor power : 350 W
- Voltage : 220 - 240 V / 50 - 60 Hz
110 - 120 V / 50 - 60 Hz
- Speeds : 2 speed + pulse
speed 1 unloaded : 16000 rpm
spee loaded : 19000 rpm
(= pulse)
- Blender jar capacity : 1.5 l total - 1.25 l effective
- Dimensions F-box : 340 x 195 x 280 mm
- Weight : 1.77 kg
Materials used:
Jar : Plastic
Housing : PP
Blade : Stainless steel
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- For disassembly- and re-assembly of the motor,
see page 3-3
REPAIR INSTRUCTIONS
Inspection after repair:
Test the safety interrupter by mounting and dismounting the
blender jar, while the appliance is switched on.
OPTIONAL (accessories)
- No specific issues

HR1720/AC
HR1721/AC
HR1724/AC
HR1727/AC
PARTS LIST + EXPLODED VIEW
4
5
7
2
3
1
6
2-3
Pos Service code Description
1
2
3
4
5
6
7
7
7
10
9965 000 23147
9965 000 23151
9965 000 23152
9965 000 23158
9965 000 23156
9965 000 23157
9965 000 23153
9965 000 23154
9965 000 23155
9965 000 26688
9965 000 26689
Blender jar assy
Sealing ring - blender knife assy
Blender knife assy
Soyabean filter assy (HR1724 + HR1727)
Sealing ring - mill assy (HR1721 + HR1727)
Mill assy (HR1721 + HR1727)
Cordset - EU
Cordset - China
Cordset - Taiwan
Motor 220-240 V / 50-60 Hz (see next page)
Motor 110-120 V / 50-60 Hz (see next page)

HR1720/AC
HR1721/AC
HR1724/AC
HR1727/AC
- Unplug the appliance from the mains!
- Unscrew the two Phillips screws.
- Remove the switch knob by using a screw driver.
- Unscrew the blender coupling (left-handed thread!) by
holding the motor axle with a slotted screwdriver.
- Disconnect the two motorwires from the soldered point on
the switch and from the crimped connection to the mains
cord.
- To reassemble the appliance, do the steps backwards.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
3-3