Philips XL5950 User manual

Register your product and get support at
www.philips.com/welcome
XL5950
Quick start guide
1Get started
2Register the handsets

What is in the box
Charger Power adapter
Handset
User manual, quick start guide,
guarantee
Caution
•Use only the supplied batteries and power adapter.

1Get started
Connect the charger Charge your phone
Connect each end of the
power adapter to:
•the DC input jact at the
back of the extra handset
charger;
•the power socket on the
wall
Charge 8 hours
Congure your phone
Place the handset on the charger to charge the handset.
When the handset is placed correctly on the charger, you
hear a docking sound.
» The handset starts charging.
Note
•Chargethebatteriesfor8hoursbeforerstuse.
Check the battery level
Icon Status
When the handset is off the base station/charger,
the bars indicate the battery level (full to low).
When the handset is on the base station/charger,
thebarsashuntilchargingcompletes.
Theemptybatteryiconashesandyouhearan
alert tone.The battery is low and needs recharging.
1 The batteries are pre-
installed in the handset.
Pull the battery tape off
from the battery door
before charging.
2 When using your phone
forthersttime,you
see a welcome message
(country dependent).
3 Please set the country and language if prompted.
4 Set the date and time.
•If the time is in 12-hour format, press to select [am]
or [pm].

2Register the handsets
You can register additional handsets to the base station.The
base station can register up to 4 handsets.
Auto registration
Place the unregistered handset on the base station.
» The handset detects the base station and registers
automatically.
» Registration is completed in less than two minutes.The
base station automatically assigns a handset number to
the handset.
Manual registration
1 Select [Menu] > [Services] > [Register], then press
[OK]toconrm.
2 Press and hold on the base station for 5 seconds.
3 Enter the system PIN. Press [Clear] to make corrections.
4 Press [OK]toconrmthePIN.
» Registration is complete in less than 2 minutes.The
base automatically assigns a handset number to the
handset.
Note
•If the PIN is incorrect or no base is found within a certain
period,yourhandsetdisplaysanoticationmessage.
Repeat the above procedure if registration fails.
•The preset PIN is 0000. No change can be made on it.
Welcome to Philips
Register your product at www.philips.com/welcome
Need help?
User manual
Refer to the user manual that came with your new phone.
Online help
www.philips.com/support
Reproduction in whole or in part is
prohibited without the written consent of
the copyright owner. Trademarks are the
property of Koninklijke Philips Electronics
N.V. or their respective owners.
All rights reserved.
© 2012 Koninklijke Philips Electronics N.V.
QSG_XL5950
12_EN_V1.0
WK11495
0168