Philips AJ4000B User manual

www.philips.com/welcome
AJ4000
Always there to help you
User Manual
Question?
Contact
Philips
Register your product and get support at

2EN
Contents
1 Important 3
2 Your clock radio 4
What's in the box 4
3 Get started 4
Install battery 4
Connect power 5
Set clock 5
4 Listen to FM radio 6
Tune to FM radio stations 6
5 Set alarm timer 6
Set alarm 6
Select alarm source 7
Deactivate the alarm timer 7
Snooze the alarm 7
6 Other features 8
Adjust brightness 8
Set sleep timer 8
Charge your mobile phone 8
7 Product information 9
Specications 9
8 Troubleshooting 10
9 Notice 11

3EN
1 Important
• Read these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or
otherapparatus(includingampliers)that
produce heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the clock radio.
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Unplug this clock radio during lightning
storms or when unused for long periods
of time.
• Referallservicingtoqualiedservice
personnel. Servicing is required when
the clock radio has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the clock radio, the
clock radio has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
• Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
clock radio:
• Install the battery correctly, + and - as
marked on the clock radio.
• Remove the battery when the clock
radio is not used for a long time.
• The battery shall not be exposed to
excessiveheatsuchassunshine,reor
the like.
• This clock radio shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
clockradio(e.g.liquidlledobjects,lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.

4EN
2 Your clock radio
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
What's in the box
Check and identify the contents of your
package. (Fig. )
a
AJ4000
www.philips.com/welcome
User Manual
3 Get started
Always follow the instructions in this chapter in
sequence.
Install battery
Caution
•Risk of explosion! Keep the battery away from heat,
sunshineorre.Neverdiscardbatteryinre.
•The battery contains chemical substances, so it should
be disposed of properly.
Insert one 9V 6F22battery(notsupplied)with
correctpolarity(+/-)asillustrated.(Fig .)
Note
•The battery can only back up clock and alarm settings.
b

5EN
Connect power
Caution
•Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
•Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Note
•The type plate is located at the bottom of the clock
radio.
(Fig. )
c
Set clock
(Fig. )
1 Switch the slider to SET TIME .
» The hour and minute digits blink.
2 Press HR and MIN to adjust time.
3 Switch the slider to CLOCKtoconrm
the setting.
1 2
SET TIME
4
CLOCK
MIN
3
3
HR
MIN
d

6EN
4 Listen to FM
radio
Note
•Keep the clock radio away from other electronic
devices to avoid radio interference.
•For better reception, fully extend and adjust the
position of the FM antenna.
Tune to FM radio stations
(Fig .)
1 Switch the slider to RADIO.
2 Rotate TUNING to select a station.
» The indicator shows the radio
frequency of the waveband.
3 While listening, rotate VOL to adjust
volume.
4 Switch the slider to OFF to turn off the
radio.
1 2
2
32 4
TUNING
OFF
VOL
RADIO
e
5 Set alarm timer
Set alarm
Follow the illustration to set the alarm (Fig. )
• AL1:Settherstalarm.
• AL2: Set the second alarm.
33
MIN
2
21 2 21
SET AL 1SET AL 2
2
22
HR
2
22
HR
f
33
MIN

7EN
Select alarm source
(Fig. )
To select the last heard channel or buzzer as
the alarm sound:
• AL1: Switch the slider to RADIO or BUZ .
• AL2: Switch the slider to RADIO or BUZ.
» The corresponding alarm icon lights up.
Note
•The gentle wake-up function is available for buzzer only.
Deactivate the alarm timer
Switch AL1 or AL2 to OFF to deactivate the
alarm clock.
» If the alarm timer is deactivated, the alarm
indicator turns off.
BUZ
AL 1
RADIO AL 2
g
Snooze the alarm
(Fig. )
1 When alarm sounds, press SNOOZE .
» The alarm snoozes and repeats ringing
nine minutes later.
2 To reset the alarm, press ALARM RESET.
» The alarm repeats ringing for the next
day.
h
2
21 2 22
ALARM
RESET
SNOOZE

8EN
6 Other features
Adjust brightness
(Fig. )
Set sleep timer
(Fig. )
1 Press SLEEP repeatedly to set the sleep
time.
» The radio turns on automatically.
2 To check the remaining sleep time, press
SLEEP again.
i
15 30 60 90 120
OFF
SLEEP
j
To deactivate the sleep timer:
• Press SLEEP repeatedly until [OFF]
appears.
Charge your mobile phone
You can use this device to charge your mobile
phone.
Note
•Make sure that the USB socket and the Micro USB are
used only for charging.
•The USB charging and Micro USB charging are available
when AC power is connected.
Option 1 :USB socket
(Fig. )
Note
•The USB cable is not supplied.
•Some USB cables may not work with this device due to
different materials and product techniques.
k

9EN
Option 2 : Micro USB
(Fig. )
l
2
22
2
21
7 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 300mW RMS
Tuner (FM)
Tuning Range 87.5 - 108MHz
Sensitivity
- Mono, 26dB S/N Ratio <22 dBf
Total Harmonic Distortion <3%
Signal to Noise Ratio >45dB
General information
AC power (power
adapter)
Brand name: Philips;
Model: AS100-065-AE130;
Input: 100-240 V~
50/60 Hz; 0.5A;
Output: 6.5 V 1.3 A
Battery power 9 V
Operation Power
Consumption 11 W
Standby Power
Consumption <1 W
USB Charge voltage DC 5V
Micro USB Charge
voltage DC 5V

10EN
Dimensions:
Main Unit
(WxHxD) 173x64x159mm
Weight:
-Main Unit 0.5 kg
8 Troubleshooting
Warning
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
(www.philips.com/support).Whenyoucontact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•Ensure that the AC power plug of the unit
is connected properly.
•Ensure that there is power at the AC
outlet.
No sound
•Adjust the volume.
No response from the unit
•Disconnect and reconnect the AC power
plug, then turn on the unit again.
No charging
•Use the USB cable bypacked with your
device for charging.
Poor radio reception
•Increase the distance between the unit and
your TV or VCR.
•Fully extend the FM antenna.
Alarm does not work
•Set the clock/alarm correctly.
Clock/alarm setting erased
•Power has been interrupted or the power
plug has been disconnected.
•Back up battery is used up.
•Reset the clock/alarm.