Philips AJB4500/05 User manual

1
Quick start guide
AJB4500
Eng
DAB CLOCK RADIO What’s in the box
AJB4500
2
Connect
Setup
Enjoy
3
© Royal Philips Electronics N.V. 2008
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China PDCC-2008
Quick Start Guide
Quick Start Guide
User Manual
User Manual
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Enjoy
3
Local scan (in the UK):
1 In DAB mode, press SCAN.
»
The clock radio scans all available local
DAB radio stations and broadcasts the
first available station.
Program DAB radio stations
You can program a maximum of 20 preset DAB
radio stations.
1 Tune to a DAB radio station.
2 Press PRESET5∞ to select a preset
number.
3 Press and hold SELECT for two
seconds.
»
The preset number of the saved station
appears.
Listen to a preset DAB radio station
1 Press SOURCE repeatedly to select
[DAB].
2 Press PRESET5∞ to select a preset
number.
AJB4500 QSG.indd 2-5AJB4500 QSG.indd 2-5 7/31/2008 2:19:44 PM7/31/2008 2:19:44 PM

1Connect
1 Fully extend the antenna and fix it to the
wall as shown.
Prepare FM/DAB antenna
A
Connect power
B
Socket
1 Connect the power plug to the power
outlet.
Setup
2
1 In standby mode, press and hold
SELECT for two seconds.
»
[SYNC ON] is displayed and [ON]
begins to blink.
2 Press PRESET5∞ to select ON or
OFF.
»
If you select [ON], the Clock Radio
reads the DAB/RDS time and sets the
clock automatically.
»
If you select [OFF], the Clock Radio
turns off the time synchronization.
3 Press SELECT to confirm.
»
The time format [24H] or [12H]
begins to blink.
4 Press PRESET5∞ to select 24H or
12H.
Set the clock
A
5 Press SELECT to confirm.
»
The hour digits are displayed and
begin to blink.
6 Press PRESET5∞ to set the hour.
7 Press SELECT to confirm.
»
The minute digits are displayed and
begin to blink.
8 Press PRESET5∞ to set the minute.
9 Press SELECT to confirm the clock
setting.
DNote
The accuracy of the transmitted time depends
on the RDS station that transmits the time
signal.
If the power supply is disconnected, the set-
tings and clock are saved for three minutes.
•
•
Enjoy
3
1 Press SOURCE repeatedly to select
[FM--TUNER].
2 Press TUNING 2 3 to tune to a radio
station.
Program radio stations automatically
You can program a maximum of 20 preset radio
stations.
1 Press and hold SCAN for two seconds.
»
[FM SCAN] appears.
Listen to FM radio
A
1 Press SOURCE repeatedly to select
[DAB].
»
When you enter the DAB mode for the
first time, the Clock Radio automatically
scans DAB radio stations.The Clock Radio
stores all available DAB radio stations and
the first available station broadcasts.
»
The last selected DAB radio station
broadcasts automatically.
Scan DAB radio stations automatically
Full scan (outside the UK):
1 In DAB mode, press and hold SCAN for
more than two seconds.
»
The clock radio scans all available DAB
radio stations and broadcasts the first
available station.
Listen to DAB digital radio
B
Setup
2
1 Press and hold AL1/AL2 for two
seconds.
»
The sound source icon,AL1/AL2 icon
and the hour digits are displayed and
begin to blink.
2 Press SOURCE repeatedly to select a
sound source: DAB, FM Tuner or Buzzer.
3 Press PRESET5∞ to set the hour.
4 Press AL1/AL2.
»
The minute digits are displayed and
begin to blink.
5 Press PRESET5∞ to set the minute.
6 Press AL1/AL2 to confirm.
»
The alarm icon is displayed.
Set the alarm timer
B
»
All available stations are programmed
in the order of waveband reception
strength.
»
The first programmed radio station
broadcasts automatically.
»
The Clock Radio turns on
automatically at the set time and
switches to the selected source.
Listen to a preset radio station
1 Press SOURCE repeatedly to select
[FM--TUNER].
2 Press PRESET5∞ to select a preset
number.
»
If the alarm timer is turned on, the
alarm icon appears.
»
If the alarm timer is turned off, the
alarm icon disappears.
Repeat alarm
1 When the alarm sounds, press
BRIGHTNESS CONTROL/
REPEAT ALARM.
»
The source icon and the alarm icon
begin to blink.
Reset alarm
1 When the alarm sounds, press SLEEP/
AL RESET.
»
The alarm stops but the alarm
settings retain for the next day.
Stop alarm sound
1 When the alarm sounds, press AL1/
AL2.
»
The alarm stops but the alarm
settings remain.
Turn on/off the alarm timer
1 Press AL1/AL2 to turn on or off the
alarm timer.
»
The alarm stops for nine minutes.
AJB4500 QSG.indd 6-9AJB4500 QSG.indd 6-9 7/31/2008 2:19:52 PM7/31/2008 2:19:52 PM