Philips EP 800 Series User manual

Philips EP
800 series
1200 series
2200 series
2500 series
3200 series
3500 series

2
Philips EP Series
Contents
Important repair instructions
•Only skilled personnel should carry out the repair.
•After repair the appliance should function properly.
•Afterrepair the appliance has to meet the regulatory- and safetyrequirements thatwere applicable at the
time of release of the model.
•After repair the appliance always has to be tested for electrical safety according VDE 0701-0702 and for
medical products IEC 62353.
General information 3
Technical information
Maintenance products
Production date (or serial number)
Optional (accessories)
Overview
Technical information 8
Water circuit
Electric circuit
Coee and machine specications
Specic tools and equipment
Specication for the measurement of the coee products temperature
Specication for the measurement of the Milk products temperature.
How to check connectivity board (Only for Wi-Fi models)
Operating logic
Brew Unit mainteinance - where to grease and positions
Disassembly- and Reassembly advice 22
Test mode 30
Functions/features explanation 40
Steam out
Descaling
Temporany solutions
Espresso Philips Service Center (EPSC)
Deactivate AquaClean lter reminder
Deactivate the beeping sound of the buttons
Reset drinks settings to default setting
Repair Flow
Version history 48

3
Technical information
•Voltage
•Frequency
•Power consumption
: 220 - 240 V
: 50 - 60 Hz
: 1500 W
•Standby power consumption: 0.22 W
•Auto shut-o time : 15 min
•Capacity water tank : 1.8 litres removable
•Capacity coee bean : 275 g
•Capacity LatteGo : 250 ml
•Capacity Coee grounds : 12 pucks
•Cord lengh : 1 m
•Pump pressure : 15 bar
•Adjustable spout height : 85 - 145 mm
•Weight and dimensions:
-Weight of product : 7 - 7.5 kg
-Dimensions of product : 246 x 372 x 433 mm
(WxDxH)
Maintenance products
•Descaler 996530067222
• Jar of Grease 1Kg 421945054671
• Jar of Grease 250g 421945054681
• Silicone grease 996530045784
Production date (or serial number)
Optional (accessories)
•AquaClean water lter CA6903
•Descaling solution CA6700
•Brew group grease HD5061
•Coee oil remover tablets CA6704
General information

4
Philips EP Series
Overview
CMF (classic milk frother) Latte Go
General information

5
Overview
CMF (classic milk frother) 800 series
CMF
General information

6
Philips EP Series
CMF
Latte Go
General information

7
CMF (Only for Wi-Fi models)
Latte Go (Only for Wi-Fi models)
Latte Go (Iced coee version)
General information

8
Philips EP Series
Water circuit
Electric circuit
ONLY FOR LATTEGO
Technical information

9
Coee and machine specications
Specic tools and equipment
Drinks Low button
( ml)
Medium button
(ml)
High button
(ml)
Volume adjustment
(only at high button - ml)
Espresso    -
Coee    -
Espresso lungo    -
Americano
(water)

()

()

()

(-)
Cappuccino
(milk)

()

()

()
-
(-)
Latte macchiato
(milk)

()

()

()
-
(-)
Hot water    -
Iced coee    -
Coee grounds drawer Description and values
Time-out for coee grounds drawer  seconds
Reset dreg counter Dreg emptying alarm, if the coee grounds drawer is removed for
more than  seconds.
STANDBY Description and values
Time (default)  minutes
Time programmed by Consumer/Service NO
Boiler temperature during Standby Boiler OFF
WATER TANK Description and values
Water reserve (pulses) with water lter  ml ( pulses)
Water reserve (pulses) with no water lter  ml ( pulses)
Water reserve modiable by Production/Service departments NO
“Fill tank” alarm YES
Connect to water mains NO
Description Notes
Flathead screwdriver # , # 
Torx screwdriver (T)
Pliers for Oetiker clamps
Digital Thermometer Type K (accuracy for temperature of , % or ± ,°C)
Temperature probe PK- (AK-A Thermocouple adapter required)
Scale KERN EMB - or comparable device with a base accuracy of
, % or ± , g
Power meter Voltcraft EnergyCheck  or comparable device with a base
accuracy of  % or ± W
Stopwatch Basic model
Serkit Tool needed for programming with our service tool
EP series cable Cable for Philips EP-- series
EPSC (Espresso Philips Service Center) Tool used to ash the SW on the machines (for SW upgrade and
diagnostics mode). Refer to SDA_
Technical information

10
Philips EP Series
Specication for the measurement of the coee products temperature
Before measuring the in-cup temperature make sure the following conditions will be met:
Conditions:
a) Water temperature in tank: 23°C (+/-2°C).
b) Use a plastic cup (see picture 1).
c) Use a digital thermometer (see picture 2) (e.g. type K probe diameter max 2mm (see picture 3).
d) The coee machine is tested without any change of parameters or calibrations, which may aect
the
temperature of products, so the measurement of temperature must be done with machine in default
factory
setting.
Procedure:
1. Place the plastic cup under the dispensing spout. (picture 1)
2. Dispense coee
3. Measure the temperature immediately after coee has being dispensed, you need to nish the
measurement within 12 seconds. The temperature in the cup is measured by placing the probe of
the thermometer in the cup near the bottom. Then stir the probe in the cup for 5 to 6 times and
read out the thermometer values during stirring. Hold the probe still in the center of the cup.
4. Record the highest value.
Depending on the coee volume selected to measure, you would need to position the probe on several
height levels to measure the correct temperature in the plastic cup.
10mm for 35gr - 17mm for 60gr - 35mm for 120gr (see Picture 3).
Espresso Coee Italy Q.ty 40 gr.
Temperature of 1st product 69°C ≤85°C
Temperature of 2nd product 72°C ≤85°C
Coee Q.ty 120 gr.
Temperature of 1st product 72°C ≤85°C
Iced coee Q.ty 120gr.
Temperature of 1st product 54°C ≤64 °C
Temperature of 2nd product 54°C ≤64 °C
Picture 1 Picture 2
Technical information
OFF Tare ON
10 mm
for 120gr and
superior
Ø max 2mm
17 mmfor 60gr
35 mm
for 35gr
Picture 3
DISPLAY