Philips 8FF3WMI Quick start guide

PhotoFrame Firmware Upgrade Instructions
Applicable models 8FF3WMI
Firmware version 1.01
Release date September 19, 2008
Release notes
Please follow the steps below to upgrade the PhotoFrame firmware.
1Format a SD (Secure Digital) card
2Copy all files from the ‘Firmware’ folder into the root folder of the storage device
(The root folder is the ‘highest’ folder in hierarchy, for example F:\)
3Insert SD into PhotoFrame
4Go to the Main Menu, [New Update] is highlighted
5Press OK to initiate the upgrade

6When the confirmation message is displayed, select [Yes], then press OK
!
Warning: Upgrade takes about 1 minute.
During the upgrade do not disconnect power, remove the memory or make new
connections. Otherwise this may harm your PhotoFrame. !
When the update is complete, the PhotoFrame reboots.
You can check the new firmware version via: Settings →Status →Firmware.