Philips DC177/37B User manual

SHUFFLE
REPEAT
SLEEP
TIMER
MENU
DSC DBB LOUD
CLOCK
DISPLAY
MUTE
PROGRAM
Quick Start Guide
Step B
Step A
Enjoy
Setup
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
FM antenna
Quick Start Guide
Pull out the insulation
plastic sheet.
2
User Manual
User manual
Remote Control
DC177
AC power adaptors
4 x iPod dock
adaptors
DC177_37_QSG_Eng 2008.2.27, 11:431

Step A Setup
1
2
3
Connection
5
1
3
4
Setting the clock
For radio reception, connect the supplied FM antenna to the
FM ANTENNA terminal.
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
In standby mode, press and hold DISPLAY/CLOCK
for 2 seconds.
Press TUNING ¡1 / 2™ ( ¡1 / 2™ on the remote control ) to
set the hours.
Press í/ ëon the set (ALBUM/PRESET +/- on the remote control )
to set the minutes.
Press DISPLAY/CLOCK to confirm the time.
speaker
(right)
speaker
(left)
FM wire antenna
1
3
2
2
2Press PROGROM to select between 12 hour and 24 hour display.
The clock digits for flash.
SHUFFLE
REPEAT
SLEEP
TIMER
MENU
DSC DBB LOUD
CLOCK
DISPLAY
MUTE
PROGRAM
CLOCK
DISPLAY
DC177_37_QSG_Eng 2008.2.27, 11:432

1
2
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Step B Enjoy
Playing an iPod
1
2
Select FM source.
Press PROGRAM on the remote control for more than two seconds to program all available stations
in order of waveband.
Pressí/ ëon the set (ALBUM/PRESET +/- on the remote control ) until the desired preset station is
displayed
Programming and tuning to radio stations
3
Correctly dock your iPod portable player in the cradle.
Select iPod source.
–Playback starts automatically.
–Press 2; to start playback, if the iPod is in sleep mode or pause mode.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (iPod or AUX, for
example).
–Then select the desired function.
SHUFFLE
REPEAT
SLEEP
TIMER
MENU
DSC DBB LOUD
CLOCK
DISPLAY
MUTE
PROGRAM
DC177_37_QSG_Eng 2008.2.27, 11:433

Step B Enjoy
2008 CKoninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com PDCC-ZC-0809
Playing a USB mass storage device
1
2
3
4
Press SOURCE repeatedly (or USB on the remote) to enter USB mode.
The LCD display shows USB.
Plug a compatible USB mass storage device to DC177’s USB port marked .
If needed, use a suitable USB cable to connect between the device and DC177’s USB por t.
The device will automatically power on.
Press 2; to start playback.
Press 9to stop playback.
Tip:
Refer to the user manual supplied for
the description about compatibility of
USB mass storage device, and
playability of the files stored on the
USB device.
DC177_37_QSG_Eng 2008.2.27, 11:434