Philips DVDR1000 MkII User manual

User Manual
Mode d'emploi
Bedienungsanleitung
Instrucciones de manejo
Istruzioni per l'uso
Gebruiksaanwijzing
Bedienungsanleitung
Bruksanvisning
Brukerhåndbok
Brugsanvisning
Käyttöohje
√‰ËÁ›Â˜ ¯Ú‹Û˘
Instrukcja obs¬ugi
Manual de utilização
01UPGRADEUMUSAGBD2.1 07-02-2002 11:24 Pagina 1

- 2 -
English
01UPGRADEUMUSAGBD2.1 07-02-2002 11:24 Pagina 2

Introduction
This CD-ROM disc contains a firmware upgrade for first-generation Philips DVD
recorders that adds DVD+R recording as well as several other interesting functions. t
can be used with the following models:
- DVDR1000/001 - DVDR1000/002 - DVDR1000/021 - DVDR1000/022
- DVDR1000/051 - DVDR1000/052 - DVDR1000/171 - DVDR1000/172
- DVDR1000/691 - DVDR1000/692 - DVDR1500/171 - DVDR150/171
Before you upgrade
t may be useful to write down the system version information of your DVD recorder
before you start the upgrade procedure, in case you need to call service. You can find
this information by pressing w(down cursor) twice in the remote control settings menu.
DI q q q q q q AN q q q q q q SV q q q
BE q q .q.q q DV q q q q q q q q FP q q
- 3 -
English
01UPGRADEUMUSAGBD2.1 07-02-2002 11:24 Pagina 3

Upgrade procedure - Read this before you
start
The complete upgrade procedure consists of TWO STAGES , and takes +/- 20
minutes.
Stage 1:
1Press OPEN/CLOSE to open the tray.
2nsert the upgrade CD-ROM disc, label side up.
3Press OPEN/CLOSE to close the tray.
‰ First ‘READING ’appears on the display, followed by ‘DOWNLOAD ’. This stage of
the procedure takes +/- 15 minutes.
‰ f the firmware was already updated, the display will show ‘UP TO DATE ’
within a few seconds.
4When the upgrade is completed the tray will open automatically.
‰ The display shows ‘TRAY OPEN ’.
IMPORTANT: DO NOT REMOVE THE DISC AFTER STAGE 1!
Stage 2:
5n case the tray is still open, press OPEN/CLOSE to close the tray.
n case the recorder already went to standby, simply press STANDBY/ON.
‰ First ‘READING ’appears on the display, followed by ‘DOWNLOAD ’. This stage of
the procedure takes +/- 5 minutes.
6When the downloading is completed the tray will open automatically.
‰ f the display shows ‘DVD+R UNSUP’, DVD+R recording will not yet be possible
your DVD recorder needs to be serviced. For this, contact your dealer or the
Philips Customer Care Center. The other new features will work.
‰ f the display shows ‘REMOVE DISC ’, the upgrade is complete. DVD+R
recording as well as the other new features are available.
7Now remove the disc.
8Press STANDBY/ON to switch off the recorder.
- 4 -
English
01UPGRADEUMUSAGBD2.1 07-02-2002 11:24 Pagina 4

New functions
DVD+R recording
From now on it is also possible to record on write-once DVD+R discs. Recording on
DVD+R works the same like DVD+RW but with the following differences:
lNew recordings are automatically made in the free space after any existing
recordings. Overwriting and append recording are not possible.
lErasing titles is possible, but the space occupied cannot be re-used.
lErasing an entire disc is not possible.
lEditing with Favorite Scene Selection (inserting chapter markers, hiding chapters) is
still possible, but the resulting edit cannot be made compatible with regular DVD
players.
lDividing titles is not possible.
lDVD+R discs must be finalized before they can be played on regular DVD players.
After finalization no more changes can be made. Thanks to Philips Ultra Finalization
the disc will be ready in one minute.
Finali ing a DVD+R disc
ln the Disc nfo Screen press u(right cursor).
‰You will now enter the ‘disc settings’ menu.
lSelect ‘ Finalize disc ’ and press OK to confirm.
‰‘ Finalizing disc ’ is shown until the action is completed.
‰After finalization the ndex Picture Screen will appear.
f the DVD+R disc was recorded on a different brand of DVD recorder you may not be
able to access the Disc Settings menu. n this case you can use the ‘ Finalize disc ’ option
in the features menu of the user preferences menu.
Safe Record
When you start recording on a DVD+RW disc by briefly pressing the RECORD or
REC/OTR key, a recording on DVD+RW will be made from the current position of the
disc pointer. To prevent this do the following:
e
- 5 -
English
01UPGRADEUMUSAGBD2.1 07-02-2002 11:24 Pagina 5

lHold the RECORD key (on the recorder) or REC/OTR key (on the remote
control) pressed for about two seconds until ‘SAFE RECORD’ appears on the
display.
lThe recorder automatically jumps to the end of the last title on the disc and starts
recording.
‰ f no free space is left. The display will show ‘DISC FULL’. Safe record is not
possible then.
Recordings on DVD+R are always automatically made after the last title on the disc.
Quickly changing the record mode
An alternative way to select the record mode is available in the ndex Picture Screen and
in tuner mode:
lPress SELECT repeatedly to choose the desired record mode.
‰ The new record mode appears on the screen and the display.
t is not possible to switch record modes during recording.
Camcorder recording date and time
f a recording was made from a digital camcorder using the i.L NK DV input, the original
recording date and time are automatically stored as DVD subtitles and in the ndex
Picture Screen.
lWhen playing this recorded DVD, press ZSUBTITLE to display the recording
date and time.
‰ The recording date and time are displayed in the right bottom corner of the
screen.
On-Screen Display during recording
lPress SYSTEM MENU during recording to bring back the OSD or to remove it
again.
- 6 -
English
01UPGRADEUMUSAGBD2.1 07-02-2002 11:24 Pagina 6

English
- 7 -
d
Optimi ing the video output (only available in North
America)
The Progressive Scan video output is always active in parallel with the other video
outputs. With an extra option in the picture settings menu of the User Preference menu,
you can optimize the video output for either Progressive Scan or regular non-
progressive (interlaced) displays.
TV Shape
Black level shift
Video shift
Optimize video output


Picture
-- --- off on off
Interlaced
01UPGRADEUMUSAGBD2.1 07-02-2002 11:24 Pagina 7

Troubleshooting
Symptom Remedy
The display shows There is no problem. The upgrade is ready.
‘DB 1E1E1E1E’. Switch the DVD recorder on again.
The display shows ‘BAD VERSION’ The system version of your DVD recorder is
or ‘BAD DISC’. already newer than that at the CD-ROM. You
cannot upgrade with the disc.
The display shows ‘SYS UNSUPP’. Upgrading is not supported for this configuration.
Contact your Philips Customer Care Center.
The display shows ‘ERROR’ or An error occurred during the upgrade
‘ENGINE ERROR’. procedure. Try once again. f the problem
persists, contact your Philips Customer Care
Center.
Although the upgrade has been Your DVD recorder may require a service
completed, recording on solution. Contact your Philips Customer Care
DVD+R is still not possible. Center.
- 8 -
English
01UPGRADEUMUSAGBD2.1 07-02-2002 11:24 Pagina 8