Philips DVP3350V/05 User manual

Quick Start Guide
DVP3350V/05
1
2
3
Connect
Set up
Enjoy
What’s in the box?
VCR & DVD PLAYER
Remote control
and 2 batteries RF cable
User
manual
Register your product and get support at
www.philips.com/welcome

For additional connection diagrams, see the accompanying User Manual.
Connect
To connect to your television, follow the instructions below.
1
SCART IN
ANTENNA IN
REAR OF TV (EXAMPLE ONLY)
REAR OF DVD+VCR
or
Antenna
Cable TV
Wall Jack
RF Coaxial cable (Supplied)
Scart cable (Not supplied)
2
5
SCART IN
ANTENNA IN
24
3
4
1Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only
after you have finished hooking up everything. Never make or change connections with equipment
connected to the power outlet.
2Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this DVD/VCR to the SCART input on
the TV using the SCART cable (not supplied).
3Connect your existing RF cable from the Antenna TV signal directly to the AERIAL jack on the rear of
the DVD/VCR.
If you have a Cable Box (or Satellite Receiver), connect the OUT jack of the Cable Box/Satellite
Receiver to the AERIAL jack on the DVD/VCR using an RF coaxial cable (not supplied).
4Connect the supplied black RF cable to the DVD/VCR’s RF-OUT jack and to your TV’s ANTENNA IN
jack. The TV’s ANTENNA IN jack could be labelled 75-ohm,TV IN, or RF IN. Check your TV manual
for details.
5Connect the power cords of the DVD/VCR,TV, and Cable Box (if applicable) to a power outlet.
6Turn on the TV power. Set the TV to a video channel. (See the accompanying DVD/VCR owner’s
manual for details.)
7Press STANDBY-ON 1on the DVD/VCR or its remote to turn on the DVD/VCR. The first time you
turn on the DVD/VCR, you should complete the VCR setup. See the other side of this Quick Start
Guide for details.

Set up
2
Initial Settings - DVD
LANGUAGE
1Press DVD on the Remote Control.
2Press SETUP and the MAIN menu will appear.
Highlight and press right B.
•selects Menu language.
•selects default Disc Audio language
•selects default Disc Subtitle language.
•selects default Disc Menu language.
Initial Settings - VCR
Setting Up the VCR the First Time
1Turn on the TV and set it to your external
video channel (SCART).
2Press STANDBY-ON 1to turn on the
DVD/VCR, then press VCR.
3Press OK to start the automatic tuning
process. The TV station stored may vary
according to the area you live in.
4Press SETUP to remove the menus from the
TV screen.
Menu Language
Original
English
Off
Original
Disc Audio
Disc Subtitle
Disc Menu
Move Select
LANGUAGE
OK i
Pr-12
ACMS
ACMS
Inserting batteries
Note where the positive and negative ends go
Remote
control
(back)

Playing a Disc
1With the TV and DVD/VCR on, press the
DVD button to put the DVD/VCR in DVD
mode.
2Press ZOPEN/CLOSE to open the disc tray.
Put a Disc in the tray with the label facing up
and the shiny side facing down.
Press ZOPEN/CLOSE again to close the tray.
3Playback may start automatically. If not, press
NNPLAY.
If a DVD Disc menu appears, use the
v/V/b/B, OK, or Number buttons to select
features or start playback. Follow the
instructions in the menu.
4To stop playing the Disc, press xx STOP.
Playable Disc
The DVD Player of the DVD/VCR will play the
following Discs.
DVDs must have a Region Code of ALL regions
or Region 2.
Need help?
User Manual
See the user manual that came with your Philips
DVD/VCR
Online
Go to www.philips.com/welcome
Enjoy
3
ALL 2
2008 © Koninklijke Philips N.V.
All rights reserved.
www.philips.com
Printed in Indonesia
MBM37484514