Philips DVP3568K User manual

Register your product and get support at
www.philips.com/welcome
DVP3568K
EN User manual 3
ZH-CN Ⴌ߀൱Ҭ 23

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363 – 2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006.
Environmental Protection Use Period
This logo refers to the period ( 10 years ) during which the toxic or hazardous substances or elements
contained in electronic information products will not leak or mutate so that the use of these [substances or
elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets.
This logo refers to the period ( 5 years ) during which the toxic or hazardous substances or elements
contained in the battery will not leak or mutate so that the use of these [substances or elements] will not
result in any severe environmental pollution, any bodily injury or damage to any assets.
Environmental Protection Use Period
Battery labeling logo
OOO O O O
XOO O O O
XOO O O O
XOO O O O
XOO O O O

3
English
EN
Contents
1 Important 4
Safety and important notice 4
Trademark notice 4
2 Your DVD player 5
Playable media 5
Product overview 5
3 Connect 7
Connect audio/video cables 7
Optional audio connections 8
Connect USB flash drive 8
Connect power 9
4 Get started 9
Prepare the remote control 9
Find the TV input channel 9
Select menu display language 9
Turn on progressive scan 9
Use Philips EasyLink 10
5 Play 10
Play a disc 10
Play video 10
Play music 12
Play photo 12
Play from a USB flash drive 13
6 Other features 13
Media copy 13
Create MP3 files 14
Karaoke 14
7 Adjust settings 15
General setup 15
Audio setup 16
Video setup 17
Preferences 19
8 Additional information 20
Update software 20
Care 20
Specifications 20
9 Troubleshooting 21
10 Glossary 22

4
Please visit www.recycle.philips.com for additional
information on a recycling center in your area.
Copyright notice
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Trademark notice
HDMI, and HDMI logo and
High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI
licensing LLC.
ABOUT DIVX VIDEO: DivX®is a
digital video format created by DivX, Inc. This is an
official DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified®device must be registered in order to
play DivX Video-on-Demand (VOD) content. To
generate the registration code, locate the DivX
VOD section in the device setup menu. Go to vod.
divx.com with this code to complete the registration
process and learn more about DivX VOD.
DivX®, DivX Certified®and associated logos are
registered trademarks of DivX, Inc. and are used
under license.
CLASS 1
LASER PRODUCT
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product in a confined•
space. Always leave a space of at least 4 inches around the
product for ventilation. Ensure curtains or other objects
never cover the ventilation slots on the product.
Never place the product, remote control or batteries
•
near naked flames or other heat sources, including direct
sunlight.
Avoid high temperature, moisture, water and dust.
•
This unit must not be exposed to dripping or splashing.•
Never place any object or items that can damage this•
unit (e.g., liquid filled objects, lighted candles).
Never place this product on other electrical equipment.
•
Keep away from this product during lightning storms.•
Where the mains plug or an appliance coupler is used as•
the disconnect device, the disconnect device shall remain
readily operable.
Visible and invisible laser radiation when open. Avoid
•
exposure to beam.
About Progressive Scan
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard definition’
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about the
local rules on the separate collection of electrical
and electronic products and batteries. The correct
disposal of these products helps prevent potentially
negative consequences on the environment and
human health.
Your product contains batteries, which cannot be
disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
EN

5
2 Your DVD player
Congratulations on your purchase, and welcome to
Philips!To fully benefit from the support that Philips offers,
register your product at www.philips.com/welcome.
Playable media
This product can play:
DVD, DVD-Video, DVD+R/+RW, DVD-R/-•
RW, DVD+R/-R DL (Dual Layer)
Video CD/SVCD•
Audio CD, CD-R/CD-RW•
MP3 media, WMA media, DivX (Ultra) media,•
JPEG files
USB flash drive•
Region codes
You can play discs with the following region codes.
DVD region code Countries
China
Product overview
Main Unit
a(Standby-On)
Turn on the DVD player or switch to•
standby mode.
bDisc compartment
cDisplay panel
d(Open/Close)
Open or close the disc compartment.•
e(Play/Pause)
Start, pause or resume disc play.•
f(USB)jack
Connect a USB flash drive.•
gMIC
Connect a microphone.•
DVD PLAYER DVP3568K
ab e
cdfg
Manufactured under license under
U.S. Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending. DTS and the
Symbol are registered trademarks and DTS Digital
Out and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights
Reserved.
Manufactured under license from
Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
The USB-IF Logos are trademarks of
Universal Serial Bus Implementers Forum, Inc.
‘DVD Video’ is a trademark of
DVD Format/Logo Licensing Corporation.
English
EN

6
d(Navigation buttons)
Navigate the menus.•
Search fast-forward (• ) or fast-backward
().
Search slow-forward (• ) or slow-
backward ( ).
e
Return to the previous display menu.•
f/
Skip to the previous or next title, chapter,•
or track.
g
Switch to the USB mode.•
hNumeric buttons
Select an item to play.•
i
Select a subtitle language on a disc.•
j
Fit the picture display to the TV screen.•
Zoom the picture in or out.•
k
Record the voice and music during•
karaoke into a USB flash drive.
l
Access or exit the Karaoke setup menu.•
m
Select an audio language or channel on•
a disc.
Access the menu of creating MP3 files.•
n
Stop play.•
o
Start, pause or resume disc play.•
p
For discs, access the play options or•
display the current disc status.
For slideshows, display a thumbnail view•
of photo files.
qOK
Confirm an entry or selection.•
r
Access or exit the setup menu.•
Remote control
a
Turn on the unit or switch to standby.•
b
Open or close the disc compartment.•
c/
Access or exit the disc menu.•
Switch to the disc mode.•
During the play of a photo slideshow,•
switch between the Fun Mode and
Simple Mode.
For VCD and SVCD, turn on or off PBC•
(playback control).
a
b
c
d
e
f
g
h
i
k
l
m
n
o
p
q
r
j
EN

7
Option 2: Connect to the component
video jacks
1Connect the component video cables
(not supplied) to:
the• Y Pb Pr jacks on this product.
the COMPONENT VIDEO input jacks•
on the TV.
2Connect the audio cables (supplied) to:
the• AUDIO OUT FRONT L/R jacks on
this product.
the audio input jacks on the TV.•
Option 3: Connect to the video (CVBS) jack
1Connect a composite video cable (supplied) to:
the• TV OUT jack on this product.
the video input jack on the TV.•
2Connect the audio cables (supplied) to:
the• AUDIO OUT FRONT L/R jacks on
this product.
the audio input jacks on the TV.•
Pb
Y
Pr
Pb
COMPONENT VIDEO OUT
YPr
3 Connect
Make the following connections to use this product.
Basic connections:
Video•
Audio•
Optional connections:
Route audio to other devices:•
Digital amplifier/receiver•
Analog stereo system•
USB flash drive•
Connect audio/video cables
Select the best video connection that TV can support.
•Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
•Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan TV).
•Option 3: Connect to the composite video
jack (for a standard TV).
Option 1: Connect to the HDMI jack
1Connect an HDMI cable (not supplied) to
the• HDMI OUT jack on this product.
the HDMI input jack on the TV.•
Note
If the device supports HDMI CEC, you can control•
compliant devices with a single remote control
(see “Get started” > “Use Philips EasyLink”).
HDMI IN
HDMI OUT
English
EN

8
Connect to the OPTICAL jack
1Connect an optical cable (not supplied) to:
the• OPTICAL jack on this product.
the OPTICAL/DIGITAL input jack on the•
device.
Connect analogue stereo system
1Connect the audio cables (supplied) to:
the• AUDIO OUT FRONT L/R jacks on
this product.
the audio input jacks on the TV.•
Connect USB flash drive
1Connect a USB flash drive to the jack on
this product.
Note
This product can only play/view MP3, WMA, DivX•
(Ultra) or JPEG files that are stored on a USB flash drive.
Press the
•button to access the content and play
the files.
OPTICAL
OPTICAL
AUDIO IN
FRONT L
FRONT R
DVD PLAYER DVP3568K
Optional audio connections
Connect the audio from this product to other devices
to enhance sound.
Connect multi channel receiver
1Connect the audio cables (not supplied) to:
the• AUDIO OUT (FRONT L/R,REAR
L/R,CENTER and SUBWOOFER) jacks
on this product.
the audio input jacks on the device.•
Connect to a digital AV amplifier/receiver
Connect to the COAXIAL jack
1Connect a coaxial cable (not supplied) to:
the• COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on•
the device.
FRONT R REAR R SUBWOOFER
FRONT L REAR L CENTER
MULTICHANNEL
AUDIO IN
DIGITAL IN
COAXIAL
EN

9
Select menu display language
Note
If this product is connected to a HDMI CEC compliant•
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
1Press .
»[General Setup] menu is displayed.
2Select [OSD Language], and then press .
3Press to select a language, and then press
OK.
Turn on progressive scan
Note
To use the progressive scan feature, you must connect a•
progressive scan TV with the component video jacks (see
“Connect” > “Connect audio/video cables” > “Option 2:
Connect to the component video jacks” for details).
1Turn on the TV to the correct video input
channel for this product.
2Press .
3Press to select [Video Setup].
Connect power
Caution
Risk of product damage! Ensure that the power supply•
voltage corresponds to the voltage printed on the back
of the product.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.•
1Connect the AC power cable to the wall socket.
The product is ready to be set up for use.»
4 Get started
Prepare the remote control
1Press and push the battery compartment to
slide it open (see “1” in the illustration).
2Insert two AAA batteries with correct
polarity (+/-) as indicated.
3Push and slide back the battery compartment
(see “3” in the illustration).
Note
If you are not going to use the remote control for a long•
time, remove the batteries.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input channel
1Press to turn on this product.
2Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
English
EN

10
Note
Philips does not guarantee 100% interoperability with all•
HDMI CEC devices.
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc•
compartment.
Do not touch the disc optical lens inside the disc
•
compartment.
1Press to open the disc compartment.
2Insert a disc with its label facing up.
3Press to close the disc compartment and
start disc play.
Note
Check the types of discs supported (see “Your DVD•
player” > “Playable media”).
If the password entry menu is displayed, enter the
•
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” > [Parental
Control]).
Play video
Note
Some operations may not work with some discs. See the•
information accompanying the disc for details.
Control video play
1Play a title.
2Use the remote control to control the play.
Button Action
Start, pause or resume disc play.
Stop disc play.
,Skip to a previous/next title or
chapter.
,Search fast-backward or fast-
forward. Press repeatedly to
change the search speed.
4Select [Progressive] > [On], and then press OK.
A warning message is displayed.»
5To proceed, select [Ok] and then press OK.
The progressive setup is complete.»
Note
If a blank/distorted screen is displayed, wait for•
15 seconds for the auto recovery.
If no picture is displayed, turn off the progressive scan
•
mode as follows:
1) Press to open the disc compartment.
2) Press the Numeric button ‘1’.
6Press to exit the menu.
7You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
During play, when the progressive scan mode is on for•
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
Use Philips EasyLink
This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
To enable the EasyLink feature, you must turn on the•
HDMI CEC operations on the TV and on other devices
connected to TV. Refer to the TVs/devices manual for
details.
One-touch play
1Press to turn on this product.
The TV (if supports one-touch play)»
automatically turns on and switches to the
correct video-in channel.
If a disc is loaded in this product, disc play»
automatically starts.
One-touch standby
1Press and hold on the remote control for
more than 3 seconds.
All the connected devices (if the device»
supports one-touch standby) automatically
switch to standby.
EN