Philips DVP4000 User manual

3139 246 14672
DVD VIDEOPLAYER DVP4000
Usermanual
Thankyouforchoosing Philips.
Needhelp fast?
ReadyourUser’sManualfirstforquicktipsthatmakeusing
yourPhilipsproductmoreenjoyable.
Ifyouhavereadyourinstructionsandstillneedassistance,
youmayaccessouronlinehelpatwww.philips.com/support
01-28 DVP4000_932 18/01/2005, 2:56 AM1

3139 246 14672
General Information
CAUTION
(WARNING LOCATION:ONTHE
BOTTOM OFTHE SET)
NEVER MAKE OR CHANGE
CONNECTIONSWITHTHE
POWER SWITCHED ON.
Laser safety
This unit employs a laser.Due to possible
eye injury,only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
PICTURES SHOWN MAYBE
DIFFERENT BETWEEN
COUNTRIES.
LASER
Type Semiconductor laser
GaAlAs
Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
For Customer Use:
Read carefully the information located at
the bottom of your DVDVIDEO player
and enter below the Serial No.Retain this
information for future reference.
Model No.DVDVIDEO 4000
Serial No. _______________
Environmental Information
All unnecessary packaging has been
omitted.The packaging has been made
easy to separate into three materials:
cardboard (box),polystyrene foam
(buffer) and polyethylene (bags,protective
foam sheet).
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Important Note:
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD Player is fully compatible
with such new discs. Should you have
difficulty playing any such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
01-28 DVP4000_932 18/01/2005, 2:56 AM2

3139 246 14671
3
English
Bahasa Melayu
Due to the inconsistency of disc formats
provided by various disc manufacturers,your
DVD system may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancements will become
common and will be easy to complete.
Go to www.philips.com/support for
software upgrade.
The apparatus shall not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, shall be placed on
apparatus.
Index
English --------------------------------------- 4
-------------------------------- 29
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorised by
Macrovision Corporation,and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Manufactured under license from Dolby
Laboratories.“Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
01-28 DVP4000_932 19/01/2005, 11:11 AM3

3139 246 14672
English
4
Introduction
Supplied accessories ....................................... 5
Care and safety information.......................... 5
Connections
ConnectingTV.............................................. 6-7
Using CompositeVideo jacks (CVBS)........ 6
Using ComponentVideo jacks (Y Pb Pr) .. 6
Using an accessory RF modulator .............. 7
Connecting the power cord.......................... 7
Optional:Connecting to anAudio System...
............................................................................. 8
Stereo system has Dolby Pro Logic or Right
/ LeftAudio In jack ......................................... 8
Optional:Connecting DigitalAV Receiver ...
............................................................................. 8
Receiver has a PCM,Dolby Digital,or
MPEG2 decoder.............................................. 8
Functional Overview
Front and Rear Panels .................................... 9
Remote Control ............................................10
Getting Started
Step 1:Inserting batteries into the
Remote Control ............................................11
Using the Remote Control to operate the
Player ............................................................... 11
Step 2:Setting up theTV........................11-12
To deactivate Progressive manually .......... 11
Selecting the color system that corresponds
to yourTV ...................................................... 12
Setting theTV Display ................................. 12
Step 3:Setting language preference ...........13
Setting the OSD Language.......................... 13
Setting theAudio,Subtitle and DVD menu
language .......................................................... 13
Disc Operations
Playable Discs .................................................14
Region Codes .................................................14
Playing discs.....................................................15
Using Disc Menu............................................15
Basic playback controls...........................16-17
Pausing playback............................................ 16
Selecting track/chapter ................................ 16
Resuming playback from the last stopped
point ................................................................ 16
Zoom .............................................................. 16
Repeat ............................................................. 16
RepeatA-B ..................................................... 16
Slow Motion .................................................. 17
Forward / Reverse Searching ..................... 17
Preview ........................................................... 17
Special disc features ......................................17
Selecting aTitle ............................................. 17
CameraAngle ................................................ 17
Changing theAudio Language.................... 17
Subtitles ..........................................................17
Playing MP3/JPEG Picture CD.....................18
General Operation....................................... 18
Playback selection......................................... 18
Repeat ............................................................. 18
Zoom picture ................................................ 18
Playback with multi-angles .......................... 18
Scan Effect ......................................................18
DVD Menu Options
Language ..........................................................19
OSD Menu .....................................................19
Audio,Subtitle,DVD Menu ........................ 19
Video Setup...............................................19-20
TV Display ...................................................... 19
TVType ........................................................... 19
Progressive – turning on/off....................... 20
Audio Setup ..............................................20-22
Digital Output ............................................... 21
LPCM Output................................................ 21
Night Mode - turning on/off.......................22
Rating..........................................................22-24
Changing the Password ...............................23
Setting the Rating .................................. 23-24
Restoring to original settings..................... 24
Specifications ......................................25
Troubleshooting ......................... 26–27
Glossary......................................................................28
Contents
01-28 DVP4000_932 18/01/2005, 2:56 AM4

3139 246 14672
English
5
Supplied accessories
Remote Control
and
battery (lithium
CR2025)
Introduction
Care and safety information
●Power consumption
– When the system is switched to
Standby mode,it is still consuming power.
To disconnect the system from the power
supply completely,remove theAC power
plug from the wall jack.
●Avoid high temperatures,moisture,
water and dust
– Do not expose the player,batteries or
discs to humidity,rain,sand or excessive
heat (caused by heating equipment or
direct sunlight.)
●Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings,making it impossible
to play a disc.Leave the player in the
warm environment until the moisture
evaporates.
●Do not block the vents
– Do not operate the DVD Player in an
enclosed cabinet, allow about 10 cm (4
inch) of free space all around the player
for adequate ventilation.
10 cm
(4 inches)
10 cm
(4 inches) 10 cm
(4 inches)
PHILIPS
●Care of the cabinet
– Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.
●Finding a suitable location
– Place the player on a flat,hard,and
stable surface.
●Disc handling
– To clean a CD,wipe it in a
straight line from the center
towards the edge using a soft,
lint-free cloth. A cleaning
agent may damage the disc!
– Write only on the printed
side of a CDR(W) and only with a soft felt-
tipped pen.
– Handle the disc by its edge,do not
touch the surface.
C
R
2
0
2
5
L
I
T
H
I
U
M
VOLUME
Audio (white,red)
cables /
Video (yellow) cable
01-28 DVP4000_932 18/01/2005, 2:56 AM5

3139 246 14672
English
6
Connections
ConnectingTV
R COAXIAL VIDEO Y Pb Pr
L
AUDIO VIDEO
M
AUDIO
IN V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
1
2
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of yourTV system.
– Connect the DVD system directly
to theTV.
Using CompositeVideo jacks
(CVBS)
1Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In,Video In,Composite or Baseband)
on theTV (cable supplied).
2To hear the sound of this DVD Player
through yourTV,use the audio cables
(white/red) to connectAUDIO OUT (L/
R) jacks of the DVD Player to the
correspondingAUDIO IN jacks on theTV
(cable supplied).
R COAXIAL VIDEO Y Pb Pr
L
AUDIO VIDEO
AUDIO
IN V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
AUDIO
OUT
V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
1
2
IMPORTANT!
– Component Video connection
provides higher picture quality. This
option must be available on yourTV.
– The progressive scan video
quality is only possible through
ComponentVideo (Y Pb Pr) output.
Using ComponentVideo jacks
(Y Pb Pr)
1Use the component video cables (green/
blue/red) to connect the DVD system’s Y
Pb Pr jacks to the corresponding
Component video input jacks (or labeled
as Y Pb Pr) on theTV (cable not supplied).
2To hear the sound of this DVD Player
through yourTV,use the audio cables
(white/red) to connectAUDIO OUT (L/
R) jacks of the DVD Player to the
correspondingAUDIO IN jacks on theTV
(cable supplied).
01-28 DVP4000_932 18/01/2005, 2:56 AM6

3139 246 14672
English
7
Connections
IMPORTANT!
– If yourTV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on theTV. See your
electronics retailer or contact for
details on RF modulator availability
and operations.
Using an accessory RF modulator
1Use the composite video cable (yellow) to
connect the DVD Player’s CVBS jack to
the video input jack on the RF modulator.
2Use the RF coaxial cable (not supplied) to
connect the RF modulator to yourTV’s
RF jack.
R COAXIAL VIDEO Y Pb Pr
L
AUDIO VIDEO
MAINS
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
2
1
RF coaxial cable toTV
Back of RF Modulator
(example only)
Antenna or
CableTV signal
VIDEO Y Pb Pr
VIDEO
MAINS
AUDIO
IN
S-VIDEO
IN
VIDEOIN
SCART/RGBIN
~AC MAINS
AUDIO
OUT V(Pr/Cr)
U(Pb/Cb)
Y
S-VIDEO
IN
VIDEOIN
COMPONENT
VIDEOIN
After everything is connected
properly,plug in theAC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
Connecting the power cord
01-28 DVP4000_932 18/01/2005, 2:56 AM7

3139 246 14672
English
8
Connections
Stereo system has Dolby Pro Logic
or Right / LeftAudio In jack
1Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on yourTV.
2Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
R COAXIAL VIDEO Y Pb Pr
L
AUDIO VIDEO
AUDIO
IN
STEREO
DIGITAL
OPTICAL
Optional: Connecting to an
Audio System Optional:Connecting DigitalAV
Receiver
Receiver has a PCM,Dolby Digital,
or MPEG2 decoder
1Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on yourTV.
2Connect the COAXIAL jack of the DVD
Player to the corresponding DigitalAudio
In jack on your Receiver (cable not
supplied).
3Set the DVD Player’s Digital Output to
PCM orALL depending on the capabilities
of your Receiver (see page 21“Digital
Output”).
Helpful Hint:
–If the audio format of the Digital Output
does not match the capabilities of your
receiver,the receiver will produce a strong,
distorted sound or no sound at all.
R COAXIAL VIDEO Y Pb Pr
AUDIO VIDEO
MAINS
AUDIO
IN
COAXIAL
OPTICAL
AV Receiver
01-28 DVP4000_932 18/01/2005, 2:56 AM8

3139 246 14672
English
9
Functional Overview
Front and Rear Panels
Mains (AC Power Cord)
– Connect to a standardAC outlet
YPbPr
– Connect toYPbPr input of aTV
CVBS (VIDEO Out)
– Connect to CVBSVideo input of aTV
R COAXIAL VIDEO Y Pb Pr
L
AUDIO VIDEO
MAINS
Audio Out (Left/Right)
– Connect toAUDIO inputs of an amplifier,
receiver or stereo system
COAXIAL (Digital audio out)
– Connect to coaxialAUDIO input of a
digital audio equipment
Caution:Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
POWER
STANDBY
ON
PLAY/PAUSE STOP
OPEN/CLOSE
POWER
IR
POWER B
– To switch the DVD player to ON or OFF
/(OPEN/CLOSE)
– Open/Close the disc tray
9 STOP
–To stop playback
2; PLAY/PAUSE
–To start or interrupt playback
IR Sensor
– Point the remote control towards this
sensor
ON LED
– LED lights up when the power is on
STANDBY LED
– LED lights up when the STANDBY mode
is on
01-28 DVP4000_932 18/01/2005, 2:56 AM9

3139 246 14672
English
10
Functional Overview
Remote Control
VOLUME
RETURN /TITLE
–To go back to previous menu /
show title menu
DISC MENU
– Enters or exits the disc contents
menu
– Switches on or off the playback
control mode (forVCD
version 2.0 only)
1 2 3 4
– Selects an item in the menu/
fast backward/forward,slow
forward/backward
OK
–Acknowledge menu selection
S
–To search or select previous
chapter or track
STOP ( 9)
–To stop playback
PLAY ( B)
–To start playback
PAUSE ( ;)
–To pause playback temporarily /
frame-by-frame playback
REPEAT
– Selects various repeat modes
REPEAT (A-B)
– Repeats playback of a specific
section on a disc
PREVIEW
–To search chapter/track during
playback
VOLUME
– Use 2/1to increase/decrease
the volume
– Disables or enables sound
output
B(STANDBY)
– To switch the DVD player to
standby mode or ON
0-9 numerical key pad
– Selects numbered items in a
menu
DISPLAY
– Displays information onTV
screen during playback
SYSTEM MENU
– Access or exit DVD Player’s
system menu
T
– To search or select next
chapter or track
SUBTITLE
– To access subtitle language in
disc menu
ANGLE
– Selects a DVD camera angle
ZOOM
– Enlarge or reduce a picture on
theTV screen
AUDIO
– To access audio language in
disc menu
01-28 DVP4000_932 18/01/2005, 2:56 AM10

3139 246 14672
English
11
Getting Started
Step 1: Using the Remote
Control
12
C
R
2
0
2
5
L
I
T
H
I
U
M
1Pull out the plastic protective sheet.
2To replace battery (Lithium CR2025);
➜pull out the battery compartment
➜replace a new battery and fully insert
the battery compartment back to the
original position.
3Close the cover.
Using the Remote Control to
operate the Player
1Aim the Remote Control
directly at the remote
sensor (iR) on the front
panel.
2Do not put any objects
between the Remote
Control and the DVD
Player while operating the
DVD Player.
CAUTION!
–Remove batteries if they are
exhausted or if the Remote Control
is not being used for a long time.
–Batteries contain chemical
substances,so they should be
disposed properly.
Step 2: Setting up theTV
IMPORTANT!
Make sure you have completed all
the necessary connections.(See
page 6-7“ConnectingTV”).
1Turn on theTV and set to the correct
video-in channel. You should see the DVD
background screen on theTV.
2Usually these channels are between the
lowest and highest channels and may be
called FRONT,A/V IN,orVIDEO.See your
TV manual for more details.
➜Or,you may go to channel 1 on your
TV,then press the Channel down button
repeatedly until you see theVideo In
channel.
➜Or,theTV Remote Control may have a
button or switch that chooses different
video modes.
➜Or,set theTV to channel 3 or 4 if you
are using an RF modulator.
3If you are using external equipment,(eg.
audio system or receiver),turn it on and
select the appropriate input source for
the DVD Player output.Refer to the
equipment owner’s manual for detail.
Y
ON
PL
A
P
A
IR
VOLUME
To deactivate Progressive manually
●When the distorted picture still
appears on theTV, it may be due to
the connectedTV does not accept
progressive signals,and progressive is set
by mistake. You must reset the unit to
interlace format.
1Turn off yourTV progressive scan mode
or turn on to interlaced mode (refer to
yourTV user manual.)
2Press /(OPEN/CLOSE) on the DVD
player to open the disc tray.
3Press numeric keypad‘1’on the
remote control for few seconds.
➜The DVD blue background screen
will appear on theTV.
01-28 DVP4000_932 18/01/2005, 2:56 AM11

3139 246 14672
English
12
Selecting the color system that
corresponds to yourTV
This DVD Player is compatible with both
NTSC and PAL.In order for a DVD disc
to play on this Player,the color system of
the Disc,theTV and the DVD Player
should match.
Language
TV Display
TV Type
Progressive
Audio RatingVideo
4:3 PanScan
Multi NTSC
PAL
Multi
1Press SYSTEM MENU.
2Press 2repeatedly to select {VIDEO
SETUP},then press OK.
3Press 34to highlight {TVTYPE}.
4Enter its submenu by pressing OK.
5Press 34to highlight one of the options
below:
PAL – Select this if the connectedTV is
PAL system.It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connectedTV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi – Select this if the connectedTV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
6Select an item and press OK.
➜Follow the instructions shown on the
TV to confirm the selection (if any).
➜If a blank/distortedTV screen appears,
wait for 15 seconds for auto recovery.
Getting Started
TIPS: To return to the previous menu,press OK.
To remove the menu,press SYSTEM MENU.
Setting theTV Display
Set the aspect ratio of the DVD Player
according to theTV you have connected.
The format you select must be available
on the disc. If it is not,the setting forTV
display will not affect the picture during
playback.
Language
TV Display
TV Type
Progressive
Audio RatingVideo
4:3 PanScan
Multi
4:3 PanScan
4:3 Letter ox
16:9
1Press SYSTEM MENU.
2Press 2repeatedly to select {VIDEO
SETUP},then press OK.
3Press 34to highlight {TV DISPLAY}.
4Enter its submenu by pressing OK.
5Press 34to highlight one of the options
below:
4:3 PANSCAN –
Select this if you have
a normalTV and want
both sides of the picture to be trimmed
or formatted to fit yourTV screen.
4:3 LETTERBOX –
Select this if you have a
normalTV.In this case,a
wide picture with black
bands on the upper and lower portions of
theTV screen will be displayed.
16:9 – Select this if
you have a wide-
screenTV.
6Select an item and press OK.
01-28 DVP4000_932 18/01/2005, 2:56 AM12

3139 246 14672
English
13
Step 3: Setting language
preference
You can select your preferred language
settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc.
Setting the OSD Language
The On-screen language for the system
menu will remain as you set it,regardless
of various disc languages.
Language
OSD Menu
Subtitle
Audio
DVD Menu
Audio RatingVideo
English
Off
English
English
1Press SYSTEM MENU.
2Press 2to select {LANGUAGE},then
press OK.
3Press 34to highlight {OSD MENU}.
4Enter its submenu by pressing OK.
5Press 34to select a language and press
OK.
Getting Started
Setting theAudio,Subtitle and DVD
menu language
You can choose your own preferred
language or soundtrack from audio,
subtitles and DVD menu languages.If the
language selected is not available on the
disc,the disc’s default language will be
used instead.
Language
OSD Menu
Subtitle
Audio
DVD Menu
Audio RatingVideo
English
Off
English
English
1Press SYSTEM MENU.
2Press 2to select {LANGUAGE},then
press OK.
3Press 34to highlight one of the options
below at a time,then press OK.
– ‘Subtitle’ (disc’s subtitles)
– ‘Audio’ (disc’s soundtrack)
– ‘DVD Menu’ (disc’s menu)
4Press 34to select a language and press
OK.
5Repeat steps 3~4for other language
settings.
TIPS: To return to the previous menu,press OK.
To remove the menu,press SYSTEM MENU.
01-28 DVP4000_932 18/01/2005, 2:56 AM13

3139 246 14672
English
14
Disc Operations
IMPORTANT!
–Depending on the DVD orVIDEO
CD,some operations may be
different or restricted.
–Do not push on the disc tray or
put any objects other than disc on
the disc tray. Doing so may cause
the disc player malfunction.
Playable Discs
Your DVD Player will play:
– DigitalVersitile Discs (DVDs)
– Video CDs (VCDs)
– DigitalVideo Discs + Recordable
[Rewritable] (DVD+R[W])
– Compact Discs (CDs)
– MP3 discs,picture (JPEG) files
on CD-R(W).
– JPEG/ISO 9660 format
–Maximum 9 characters display.
–Supported sampling frequencies:
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)
–Supported Bit-rates :32~256 kbps
(MPEG-1), 8~160 kbps (MPEG-2)
variable bitrates
Helpful Hints:
–It may not be possible to play CD-R/RW
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
–Unfinalised discs should have the last
session closed before playing.
–If you are having trouble playing a
certain disc,remove the disc and try a
different one. Improper formatted disc will
not play on this DVD Player.
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Region Codes
This DVD Player is designed to support
the Region Management System. Check
the regional code number on the disc
package.If the number does not match
the Player’s region number (see table
below),the Player may be unable to
playback the disc.
Region Region
number of
the unit
Discs that can
be played
(Example)
U.S.A.and
Canada regions
U.K and
Europe regions
Asia Pacific
regions
Australia/Latam
region
1
2
3
ALL
4
ALL
ALL
ALL
1
2
3
4
China region 6
ALL
6
01-28 DVP4000_932 18/01/2005, 2:56 AM14

3139 246 14672
English
15
IMPORTANT!
If the inhibit icon (ø) appears on the
TV screen when a button is pressed,
it means the function is not available
on the current disc or at the current
time.
Playing discs
1Connect the power cords of the DVD
Player andTV (and any optional stereo or
AV receiver) to a power outlet.
2Turn on theTV power and set to the
correctVideo In channel. (See page 11
“Setting up theTV”).
3Press POWER B on the DVD Player
front panel.
➜You should see the DVD background
screen on theTV.
4Press 0(OPEN/CLOSE)button to open
the disc tray and load in a disc,then press
the same button again to close the disc
tray.
➜Make sure the label side is facing up.
For double-sided discs,load the side you
want to play facing up.
5Playback will start automatically.If not
press PLAY B.
➜If a disc menu appears on theTV,see
“Using the Disc Menu”.
➜If the disc is locked by parental control,
you must enter your four-digit password.
(See page 23).
6At any time,simply press STOP to stop
playback.
Disc Operations
Using the Disc Menu
Depending on the disc,a menu may
appear on theTV screen once you load
the disc.
To select a playback feature or item
●Use the 1234or numeric keypad
(0-9) on the Remote Control,then press
PLAY Bto start playback.
To access or exit from the menu
●Press DISC MENU on the Remote
Control.
ForVCD with Playback Control
(PBC) feature (version 2.0 only)
PBC playback allows you to playVideo
CDs interactively,following the menu on
the display.
●In stop mode,use the numeric keypad
(0-9) to select a track and PBC will turn
off.
➜Playback will start automatically
●During playback,press DISC MENU;
➜If PBC is ON,it will switch to OFF and
continue playback.
➜If PBC is OFF,it will switch to ON and
return to menu screen.
●During playback,pressing RETURN/
TITLE will return to the menu screen (if
PBC is on).
01-28 DVP4000_932 18/01/2005, 2:56 AM15

3139 246 14672
English
16
Disc Operations
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Basic playback controls
Unless otherwise stated, all operations
described are based on the use of
Remote Control.
Pausing playback
(DVD/VCD/CD/MP3)
1During playback,press PAUSE ;.
➜Playback will pause and sound will be
muted.
2Press PAUSE ;again to select the next
picture frame.
3To return to normal playback,press
PLAY B.
Selecting track/chapter
(DVD/VCD/CD)
1Press Tbriefly during playback to go
to the next chapter/track
2Press Sto go to the previous track or
chapter.
3To go directly to any chapter/track,enter
the chapter/track number using the
numerical keys (0-9).
Repeat (DVD/VCD)
●Press REPEAT continuously to choose a
Repeat mode during playback.
REPEAT CHAPTER (DVD)
– to repeat playback of the current
chapter.
REPEATTITLE (DVD)
– to repeat playback of the current
title.
REPEAT SINGLE (VCD)
– to repeat playback of the current
track.
REPEATALL (VCD)
– to repeat playback of all the disc.
OFF (DVD/VCD)
– to cancel the repeat mode.
Helpful Hint:
–REPEAT function is not available forVCD
2.0 when PBC is on.
RepeatA-B (DVD/VCD/CD)
1Press REPEATA-B at your chosen
starting point.
2Press REPEATA-B again at your chosen
end point.
➜The section will now repeat continuously.
3To exit the sequence,press REPEATA-B.
Zoom (DVD/VCD/JPEG)
Zooming allows you to enlarge or return
to original size of the video image during
playback.
1Press ZOOM repeatedly to increase or
to return to the original size.
2Press 1234to pan across theTV
screen.
Resuming playback from the last
stopped point (DVD/VCD/CD)
Resume playback of the last five discs,
even if the disc was removed from the
Player.
●To memorise the last stop point,press B
(STANDBY)button on the remote
control during playback.
●Press B(STANDBY)again to switch on
the player and the disc will play from the
last stop point.
●Press STOP 9to cancel the resume
mode.
01-28 DVP4000_932 18/01/2005, 2:56 AM16

3139 246 14672
English
17
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Disc Operations
Forward / Reverse Searching
(DVD/VCD/CD)
1Press 12during playback to select the
required speed:2X,4X,8X or 16X
(backward or forward).
➜Sound will be muted (DVD/VCD) or
intermittent (CD).
2To return to normal speed,press PLAY B.
Slow Motion (DVD/VCD)
1Press 34during playback to select the
required speed:1/2,1/4,1/8 or 1/16
(backward or forward).
➜Sound will be muted.
2To return to normal speed,press PLAY B.
Preview (DVD/VCD)
TheTime Search function allows you to
start playing at any chosen time on the
disc.
1Press PREVIEW.
2Use 2keys to select an option.
3Enter hours,minutes and seconds from
left to right in the time edit box using
remote control numerical key pad.
For DVD
➜Time (example - 00:34:27)
➜Title/Chapter (example - 000/008)
ForVCD
➜Track Search (example - 00:30:00)
➜Track (example - 001)
4Press the OK key to confirm.
➜Playback starts from the selected time
on the disc.
Special DVD features
Selecting a title
Some DVDs may contain several titles.If
the disc has a title menu recorded on it,
you can start playback from the selected
movie title.
1Press DISC MENU.
➜The disc title menu appears on theTV
screen.
2Use 341 2 keys or numeric keypad
(0-9) to select a title.
3Press OK key to confirm.
CameraAngle
If the disc contains sequences recorded
from different angle,this allows you to
view picture from different angle.
●Press ANGLE repeatedly to select
different desired angle.
➜Playback changes to the selected angle.
Changing theAudio Language
●Press AUDIO repeatedly to select
different audio languages.
Subtitles
●Press SUBTITLE repeatedly to select
different subtitle languages.
01-28 DVP4000_932 18/01/2005, 2:56 AM17

3139 246 14672
English
18
Disc Operations
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Repeat
●Press REPEAT repeatedly to access
different‘Play Mode’.
REPEAT SINGLE
– to repeat playback of the current file.
REPEATALL
– to repeat playback of all files in the
disc.
OFF
– to cancel the repeat mode.
Zoom picture (JPEG)
●During playback,press ZOOM repeatedly
to display the picture with different scales.
●Use 1234to view the zoomed picture.
Playback with multi-angles (JPEG)
●During playback,press 3412to rotate
the picture on theTV screen.
3:rotate the picture vertically by 180º
4:rotate the picture horizontally by 180º
1:rotate the picture anti-clockwise by 90º
2:rotate the picture clockwise by 90º
Scan Effect (JPEG)
●Press ANGLE repeatedly to choose
different scan effect.
➜Various scan effect appears on the top
left hand corner on theTV screen.
Playback selection
During playback,you can;
●Press S/ Tto select another file in
the current folder.
●Use 1234on the remote to rotate/flip
the picture files.
●Press ;/ Brepeatedly to pause/resume
playback.
Playing MP3/JPEG Picture CD
This player can playback MP3,JPEG,or
Picture CD files on a personally recorded
CD-R/RW disc or commercial CD.
IMPORTANT!
You have to turn on yourTV and set to
the correctVideo In channel. (See page
11“Setting up theTV”).
General Operation
1Load a disc.
➜The playback will start automatically.
●Press STOP to display disc menu on the
TV screen.
2Use 34to select the folder and press
OK to open the folder.
JPEG 6/103
Images
8. image 8
9. image 9
10. image 10
11. image 11
12. image 12
13. image 13
14. image 14
1. image 1
2. image 2
3. image 3
4. image 4
5. image 5
6. image 6
7. image 7
MP3 1/10
MP3
8. music 8
9. music 9
10. music 10
1. music 1
2. music 2
3. music 3
4. music 4
5. music 5
6. music 6
7. music 7
3Press 34or use the numeric keypad
(0-9) to highlight an option.
4Press OK to confirm.
01-28 DVP4000_932 18/01/2005, 2:56 AM18

3139 246 14672
English
19
DVD Setup Menu Options
TIPS: To return to the previous menu,press OK.
To remove the menu,press SYSTEM MENU.
This DVD Player setup is carried out via
theTV,enabling you to customise the
DVD Player to suit your particular
requirements.
Language
1Press SYSTEM MENU.
2Press 2to select {LANGUAGE}.
3Press OK to confirm.
Language
OSD Menu
Subtitle
Audio
DVD Menu
Audio RatingVideo
OSD Menu
This menu contains various language
options for display language on the screen.
For details,see page 13.
Audio,Subtitle,DVD Menu
These menus contain various language
options for audio,subtitle and DVD menu
which may be recorded on the DVD disc.
For details,see page 13.
Video Setup
1Press SYSTEM MENU.
2Press 2repeatedly to select {VIDEO}.
3Press OK to confirm.
Language
TV Display
TV Type
Progressive
Audio RatingVideo
TV Display
This menu contains the options for
setting the aspect ratio of the DVD Player
according to the connectedTV.For details,
see page 12.
TVType
This menu contains the options for
selecting the color system that matches
the connectedTV.For details,see page 12.
01-28 DVP4000_932 18/01/2005, 2:56 AM19

3139 246 14672
English
20
DVD Setup Menu Options
TIPS: To return to the previous menu,press OK.
To remove the menu,press SYSTEM MENU.
Progressive –turning on/off
This feature is only applicable if you have
connected this DVD Player to a
Progressive ScanTV through theY Pb Pr
jacks (see page 6).
Language
TV Display
TV Type
Progressive
Audio RatingVideo
4:3 PanScan
Multi
Off On
Off
1In‘VIDEO SETUP’,press OK to enter the
submenu.
2Press 34to highlight {PROGRESSIVE},
then press OK.
3Press 34to highlight one of the options
below:
ON
To enable Progressive Scan function.
OFF
To disable Progressive Scan function.
4Select an item and press OK.
➜Follow the instructions show on theTV
to confirm the selection (if any).
➜If a blank/distortedTV screen appears,
wait for 15 seconds for auto recovery.
Audio Setup
1Press SYSTEM MENU.
2Press 2repeatedly toselect {AUDIO
SETUP}.
3Press OK to confirm.
Language
Digital Output
LPCM Output
Night Mode
Audio RatingVideo
01-28 DVP4000_932 18/01/2005, 2:57 AM20