Philips DVP3500K User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
DVP3500K
DVP3500K_98_EN_UM_V1.0.indd 1 2/21/2011 3:32:57 PM

3
English
EN
Contents
1 Important 4
Safety and important notice 4
Trademark notice 4
2 Your DVD player 5
Playable media 5
Product overview 5
3 Connect 6
Connect audio/video cables 6
Optional audio connections 7
Connect power 7
4 Get started 8
Prepare the remote control 8
Find the TV input channel 8
Select menu display language 8
Turn on progressive scan 8
5 Play 9
Play a disc 9
Play video 9
Play photo 11
Play musical slideshow 11
6 Other features 12
Karaoke 12
7 Adjust settings 13
General setup 13
Audio setup 13
Video setup 14
Preferences 15
8 Additional information 16
Update software 16
Care 16
Specications 17
9 Troubleshooting 17
10 Glossary 18
DVP3500K_98_EN_UM_V1.0.indd 3 2/21/2011 3:32:57 PM

4
Copyright notice
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Trademark notice
Manufactured under license from
Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
‘DVD Video’ is a trademark of
DVD Format/Logo Licensing Corporation.
CLASS 1
LASER PRODUCT
1 Important
Safety and important notice
Warning
Riskofoverheating!Neverinstalltheproductinaconned•
space. Always leave a space of at least 4 inches around the
product for ventilation. Ensure curtains or other objects
never cover the ventilation slots on the product.
Never place the product, remote control or batteries near
•
nakedamesorotherheatsources,includingdirectsunlight.
Avoid high temperature, moisture, water and dust.
•
This unit must not be exposed to dripping or splashing.•
Never place any object or items that can damage this•
unit(e.g.,liquidlledobjects,lightedcandles).
Never place this product on other electrical equipment.
•
Keep away from this product during lightning storms.•
Where the mains plug or an appliance coupler is used as•
the disconnect device, the disconnect device shall remain
readily operable.
Visible and invisible laser radiation when open. Avoid
•
exposure to beam.
About Progressive Scan
Consumersshouldnotethatnotallhighdenition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switchtheconnectiontothe‘standarddenition’
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
Disposal of your old product and batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other household
waste. Please inform yourself about the local rules
on the separate collection of electrical and electronic
products and batteries. The correct disposal of
these products helps prevent potentially negative
consequences on the environment and human health.
Your product contains batteries, which cannot be
disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for additional
information on a recycling center in your area.
EN
DVP3500K_98_EN_UM_V1.0.indd 4 2/21/2011 3:32:59 PM

5
Remote control
a
Turn on the unit or switch to standby.•
b
Open or close the disc compartment.•
cDISC MENU
Access or exit the disc menu.•
Switch to the disc mode.•
During the play of a photo slideshow,•
switch between the Fun Mode and
Simple Mode.
For VCD and SVCD: turn on or off PBC•
(playbackcontrol).
d
Navigate the menus.•
Search fast-forward (• )orfast-backward
().
Search slow-forward (• )orslow-
backward ( ).
c
e
f
g
h
j
i
a
b
r
q
p
k
m
l
o
n
d
2 Your DVD player
Congratulations on your purchase, and welcome to
Philips!TofullybenetfromthesupportthatPhilips
offers, register your product at www.philips.com/
welcome.
Playable media
This product can play:
DVD, DVD-Video, DVD+R/+RW, DVD-R/-•
RW,DVD+R/-RDL(DualLayer)
Video CD/SVCD•
Audio CD, CD-R/CD-RW•
MP3media,WMAmedia,JPEGles•
Region codes
You can play discs with the following region codes.
DVD region code Countries
AsiaPacic,Taiwan,Korea
Product overview
Main unit
a(Standby-On)
Turn on the DVD player or switch to•
standby mode.
bDisc compartment
cDisplay panel
d(Open/Close)
Open or close the disc compartment.•
e(Play/Pause)
Start, pause or resume disc play.•
fMIC
Connect a microphone.•
ab cdef
English
EN
DVP3500K_98_EN_UM_V1.0.indd 5 2/21/2011 3:33:01 PM

6
3 Connect
Make the following connections to use this product.
Basic connections:
Video•
Audio•
Optional connections:
Route audio to other devices:•
Digitalamplier/receiver•
Analog stereo system•
Note
Refer to the type plate at the back or bottom of the•
productforidenticationandsupplyratings.
Before you make or change any connections, ensure that
•
all the devices are disconnected from the power outlet.
Connect audio/video cables
Select the best video connection that TV can
support.
• Option 1: Connect to the component video
jacks(forastandardTVorProgressiveScanTV).
• Option 2:Connecttothevideo(CVBS)jack
(forastandardTV).
Option 1: Connect to the component
video jacks
1Connect the component video cables (not
supplied)to:
the• Y Pb Pr jacks on this product.
the COMPONENT VIDEO input jacks•
on the TV.
2 Connecttheaudiocables(supplied)to:
the• AUDIO OUT L/R jacks on this
product.
the audio input jacks on the TV.•
Pb
Y
Pr
Pb
COMPONENT VIDEO OUT
Y
Pr
AUDIO OUT
AUDIO IN
eBACK
Return to the previous display menu.•
f/
Skip to the previous or next title, chapter,•
or track.
g
Mute or restore audio output.•
hNumeric buttons
Select an item to play.•
iSUBTITLE
Select a subtitle language on a disc.•
jZOOM
Fit the picture display to the TV screen.•
Zoom the picture in or out.•
kVOCAL
Change an audio channel of a karaoke•
disc.
lKARAOKE
Access or exit the Karaoke setup menu.•
mAUDIO
Select an audio language or channel on•
a disc.
n
Stop play.•
o
Start, pause or resume disc play.•
pINFO
For discs: access the play options or•
display the current disc status.
For slideshows: display a thumbnail view•
ofphotoles.
qOK
Conrmanentryorselection.•
rSETUP
Access or exit the setup menu.•
EN
DVP3500K_98_EN_UM_V1.0.indd 6 2/21/2011 3:33:03 PM

7
1 Connecttheaudiocables(supplied)to:
the• AUDIO OUT L/R jacks on this
product.
the audio input jacks on the device.•
Connect power
Caution
Risk of product damage! Ensure that the power supply•
voltage corresponds to the voltage printed on the back
of the unit.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.•
1Connect the AC power cable to:
this product.•
the wall socket.•
This product is ready to be set up for use.»
Option 2: Connect to the video (CVBS)
jack
1 Connectacompositevideocable(supplied)to:
the• TV OUT jack on this product.
the video input jack on the TV.•
2 Connecttheaudiocables(supplied)to:
the• AUDIO OUT L/R jacks on this
product.
the audio input jacks on the TV.•
Optional audio connections
Connect the audio from this product to other devices
to enhance sound.
Connect to digital amplier/receiver
1 Connectacoaxialcable(notsupplied)to:
the• COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on•
the device.
Connect analogue stereo system
VIDEO IN
AUDIO OUT
AUDIO IN
TV OUT
DIGITAL
OUT
DIGITAL
IN
COAXIAL
AUDIO OUT
AUDIO IN
English
EN
DVP3500K_98_EN_UM_V1.0.indd 7 2/21/2011 3:33:04 PM

8
3Press to select a language, and then press
OK.
Turn on progressive scan
Note
To use the progressive scan feature, you must connect a•
progressive scan TV with the component video jacks (see
“Connect” > “Connect audio/video cables” > “Option 1:
Connecttothecomponentvideojacks”fordetails).
1Turn on the TV to the correct video input
channel for this product.
2Press SETUP.
3Press to select [Video Setup].
4Select [Progressive] > [On], and then press
OK.
A warning message is displayed.»
5To proceed, select [Ok] and then press OK.
The progressive setup is complete.»
Note
If a blank/distorted screen is displayed, wait for 15•
seconds for the auto recovery.
If no picture is displayed, turn off the progressive scan
•
mode as follows:
1)Press to open the disc compartment.
2)PresstheNumeric button ‘1’.
6Press SETUP to exit the menu.
7You can now turn on the progressive scan
modeontheTV(seetheTVusermanual).
Note
During play, when the progressive scan mode is on for•
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
4 Get started
Prepare the remote control
1Press and push the battery compartment to
slideitopen(see“1”intheillustration).
2Insert two AAA batteries with correct
polarity(+/-)asindicated.
3Push and slide back the battery compartment
(see“3”intheillustration).
Note
If you are not going to use the remote control for a long•
time, remove the batteries.
Do not mix batteries (old and new or carbon and
•
alkaline,etc.).
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input channel
1Press to turn on this product.
2Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
toselecttheA/Vinputchannel).
Select menu display language
1Press SETUP.
»[General Setup] menu is displayed.
2Select [OSD Language], and then press .
EN
DVP3500K_98_EN_UM_V1.0.indd 8 2/21/2011 3:33:05 PM

9
Button Action
Start, pause or resume disc play.
Stop disc play.
,Skip to a previous/next title or
chapter.
, Search fast-backward or fast-
forward. Press repeatedly to change
the search speed.
, Search slow-forward or slow-
backward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
AUDIO Select an audio language or channel
available on a disc.
SUBTITLE Select a subtitle language available
on a disc.
ZOOM
(Screent)
Fit the picture format to the TV
screen.
Press repeatedly until the image is
scaledtottotheTVscreen.
ZOOM Toggle between screen aspect ratio
and different zoom factor.
To pan through the zoomed image,
press the Navigation buttons.
INFO Access the play options and display
the current disc status.
Access DVD menu
1Press DISC MENU to access the disc root
menu.
2Select a play option, then press OK.
In some menus, press the• Numeric
buttons to input your selection.
Access VCD menu
ThePBC(playbackcontrol)featureisavailablefor
VCD/SVCD, which can display the contents menu
for you to select a play option. The PBC is on by
default in the factory.
Note
See “Adjust settings” > “Preferences” >•[PBC] on how
to turn PBC on or off.
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc•
compartment.
Do not touch the disc optical lens inside the disc
•
compartment.
1Press to open the disc compartment.
2Insert a disc with its label facing up.
3Press to close the disc compartment and
start disc play.
Note
Check the types of discs supported (see “Your DVD•
player”>“Playablemedia”).
If the password entry menu is displayed, enter the
•
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” > [Parental
Control]).
Play video
Note
Some operations may not work with some discs. See the•
information accompanying the disc for details.
Control video play
1Play a title.
2Use the remote control to control the play.
English
EN
DVP3500K_98_EN_UM_V1.0.indd 9 2/21/2011 3:33:06 PM

10
Note
Applicable only to discs that contain multi-angle scenes.•
Repeat play for a specic section
1During play, press INFO.
2Press to select [REPEAT AB].
3Press OK to set the start point.
4Press OK to set the end point.
Repeat play starts.»
To cancel repeat play, press»OK again.
Note
The marked section for repeat play is only possible•
within a track/title.
Play music
Control a track
1Play a track.
2Use the remote control to control the play.
Button Action
Start, pause or resume disc
play.
Stop disc play.
,Skip to a previous/next track.
Select an item to play.
, Searches fast-backward or fast-
forward. Press repeatedly to
change the search speed.
Quick skip play
This feature is only available for audio CDs.
1During play, press INFO repeatedly to
select an option.
Display Action
[Disc Go To] Skipplaytoaspecictime
within the disc.
[Track Go To] Skipplaytoaspecictime
within a track.
[Select Track] Skipplaytoaspecictrack
number.
1Display the contents menu via one of the
following ways:
If PBC is on, load in a VCD/SVCD.•
During play with PBC on, press•
BACK.
2Press the Numeric buttons to select a play
option, and then press OK to start play.
If PBC is turned off, it skips the menu•
displayandstartsplayfromtherst
track.
Preview disc contents
1During play, press INFO.
The disc status menu is displayed.»
2Select [Preview], and then press .
3Select a preview option, and then press OK.
A thumbnails preview screen is displayed.»
To go to the next/previous preview•
screen, select [Prev] or [Next], and then
press OK.
To start play, press• OK at the selected
thumbnail picture.
Skip play to a specic time
1During play, press INFO.
The disc status menu is displayed.»
2Select an option for the current elapsed
playing time, and then press .
• [TT Time](titletime)
• [CH Time](chaptertime)
• [Disc Time]
• [Track Time]
3Press the Numeric buttons to enter the time
to skip to, then press OK.
Display play time
1During play, press INFO.
The disc status menu is displayed.»
2Select [Time Disp.], and then press .
The display options vary from disc type.»
3Select an option, and then press OK.
View DVD play from different angles
1During play, press INFO.
The disc status menu is displayed.»
2Select [Angle], and then press .
3Press the Numeric buttons to change the angle.
Play changes to the selected angle.»
EN
DVP3500K_98_EN_UM_V1.0.indd 10 2/21/2011 3:33:06 PM

11
To enlarge the selected photo and start•
slideshow, press OK.
To return to the menu, press• BACK.
Note
It may require longer time to display the disc content•
on the TV due to the large number of songs/photos
compiled onto one disc.
If the JPEG photo is not recorded with an ‘exif ’ type
•
le,theactualthumbnailpicturecannotbeshownon
the screen. It is replaced by a ‘blue mountain’ thumbnail
picture.
This product can only display digital camera pictures
•
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion JPEG,
or pictures in formats other than JPEG, or sound clips
associated with pictures.
Folders/lesthatexceedthesupportedlimitofthis
•
product cannot be displayed or played.
Control photo play
1Play a photo slideshow.
2Use the remote control to control the play.
Button Action
/Rotate a photo anti-clockwise/
clockwise.
/Rotate a photo horizontally/
vertically.
ZOOM Zoom in or out of a photo.
Play pauses in zoom mode.
Stop a play.
Play musical slideshow
Create a musical slideshow to play MP3/WMA music
lesandJPEGphotolessimultaneously.
Note
To create a musical slideshow, you must store the MP3/•
WMAandJPEGlesonthesamedisc.
1Play MP3/WMA music.
2Press BACK to return to the main menu.
3Navigate to the photo folder/album and press
OK to start slideshow play.
Slideshow begins and continues till the end»
of the photo folder or album.
Audio continues to play until the end of»
the disc.
To stop slideshow play, press• .
To stop music play, press• again.
2Press the numeric buttons to change the time/
number to skip to.
Play MP3/WMA music
MP3/WMAisatypeofhighlycompressedaudiole
(leswith.mp3,.wmaextensions).
1Insert a disc that contains the MP3/WMA music.
A contents menu is displayed.»
2If play does not automatically start, select a
track to play.
To select another track/folder, press• ,
then press OK.
Note
Fordiscrecordedinmultiplesessions,onlytherst•
session is played.
ForaWMAlethatisprotectedbyDigitalRights
•
Management(DRM),itcannotbeplayedonthisproduct.
This product does not support MP3PRO audio format.
•
For any special character that is present in the MP3 track•
name(ID3)oralbumname,itmightnotbedisplayed
correctly on the screen because these characters are not
supported.
Folders/lesthatexceedthesupportedlimitofthis
•
product cannot be displayed or played.
Repeat play for a specic section
For audio CDs,
1During play, press INFO repeatedly until
[Off] is displayed.
2Press to select a repeat option.
For MP3/WMA les,
1During play, press INFO repeatedly to
select a repeat option.
Play photo
Play photo as slideshow
YoucanplayJPEGphotos(leswith.jpegor.jpg
extensions).
1Insert a disc that contains the JPEG photos.
Slideshowbegins(forKodakdisc),ora»
contentsmenu(forJPEGdisc)isdisplayed.
2Select a photo, and then press OK to start
slideshow.
Todisplayphotosincolor(FunMode)orin•
blackandwhite(SimpleMode),pressDISC
MENU.
To preview the photos in thumbnail, press•
INFO.
To select a photo, press the• Navigation
buttons.
English
EN
DVP3500K_98_EN_UM_V1.0.indd 11 2/21/2011 3:33:07 PM

12
1)Inthe[Karaoke Scoring] option, select a level
(basic/intermediate/advance).
2)Inthe[Karaoke Idol] option, turn on the
contest.
The song selection menu is displayed.»
3)Inputatrack(VCD/SVCD)oratitle/chapter
(DVD)astherstsong.Upto4songscanbe
selected.
4)Thenselect[Start], and press OK to start play
selected songs.
After all the selected songs end, a contest»
result is displayed.
[Key Shift] - Adjust the pitch level that matches
your voice.
[Vocal] - Select various Karaoke audio modes, or
turn off original vocal.
6 Other features
Karaoke
Youcanconnectamicrophone(notsupplied)tosing
along with a music source.
Note
Before you connect a microphone, set the microphone•
volume to the minimum to prevent howling.
1Turn on the TV, and select the TV input
channel.
2Connect a microphone to the MIC jack on this
product.
3Turn on the microphone sound output (see
“Adjust Karaoke settings”).
4Play a Karaoke disc and sing through the
microphone.
To select a Karaoke audio mode, press•
repeatedly VOCAL on the remote control.
Adjust Karaoke settings
Note
You need to turn on the microphone sound output in•
the [Microphone] option to activate karaoke-related
menu options.
1Press KARAOKE.
The karaoke settings menu is displayed.»
2Select an option, and then press OK.
3Change or set a setting, and then press OK.
4Press KARAOKE again to exit the menu.
[Microphone] - Turn on or off the microphone
sound output.
[MIC Volume] - Adjust the microphone volume.
[Echo] - Adjust the echo level.
[Karaoke Scoring] - Turn off the function of
Karaoke scoring or select a scoring level (basic/
intermediate/advance).Ifalevelisselected,the
score is displayed after each song ends.
[Karaoke Idol] - Song contest among 4 singers.
EN
DVP3500K_98_EN_UM_V1.0.indd 12 2/21/2011 3:33:07 PM

13
Audio setup
1Press SETUP.
»[General Setup] menu is displayed.
2Press to select [Audio Setup], and then
press to enter the submenu.
3Select an option, and then press OK.
4Select a setting, and then press OK.
To return to the previous menu, press•
BACK .
To exit the menu, press• SETUP.
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
• [LT/RT] - For the surround sound output
through two speakers.
• [Stereo] - For the stereo output.
[Digital Audio]
Selectadigitalsettingbasedonthedigitalamplier/
receiver that is connected through the digital jack
(coaxial/digital).
• [Digital Output] - Select a type of digital output.
• [All] - Support multi-channel audio formats.
• [Off] - Disable digital output.
• [PCM Only] - Downmix to two-channel
audio format.
• [LPCM Output] - Select the LPCM (Linear
PulseCodeModulation)outputsamplingrate.
• [48kHZ] - For discs recorded at sampling
rate of 48 kHz.
• [96kHZ] - For discs recorded at sampling
rate of 96 kHz.
Note
•[LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only].
The higher the sampling rate, the better the sound
•
quality.
Sound Mode
CD Upsampling
Digital Audio
Analogue Output
Volume
Audio Setup
Night Mode
7 Adjust settings
Note
If the setup option is grayed out, it means the setting•
cannot be changed at the current state.
General setup
1Press SETUP.
»[General Setup] menu is displayed.
2Press to enter the submenu.
3Select an option, and then press OK.
4Select a setting, and then press OK.
To return to the previous menu, press•
BACK.
To exit the menu, press• SETUP.
[Disc Lock]
Set the play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
• [Lock] - Restrict the access to the current
disc. At the next time when you want to play
this disc or unlock it, you need to enter the
password.
• [Unlock] - Play all discs.
[OSD Language]
Select a language for on-screen menu.
[Sleep Timer]
Switch automatically to standby at the preset time.
• [Off] - Disable sleep mode.
• [15 Mins], [30 Mins], [45 Mins], [60 Mins] -
Select the countdown time for this product to
switch to standby.
[Auto Standby]
Turn on/off the auto standby mode.
• [On] - Switch to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
• [Off] - Disable the auto standby mode.
English
EN
DVP3500K_98_EN_UM_V1.0.indd 13 2/21/2011 3:33:08 PM

14
1Press SETUP.
»[General Setup] menu is displayed.
2Press to select [Video Setup], and then
press to enter the submenu.
3Select an option, and then press OK.
4Select a setting, and then press OK.
To return to the previous menu, press•
BACK.
To exit the menu, press• SETUP.
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
• [PAL] - For a PAL-system TV.
• [Multi] - For TV that is compatible with both
PAL and NTSC.
• [NTSC] - For an NTSC-system TV.
[TV Display]
Select a display format:
• [4:3 Pan Scan] - For a 4:3 screen TV: full-height
display with the trimmed sides.
• [4:3 Letter Box] - For a 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
• [16:9] - For a wide-screen TV: display ratio 16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
• [On] - Turn on progressive scan.
• [Off] - Turn off progressive scan mode.
Note
For more detailed description, see “Get started” >•
“Turn on progressive scan”.
[Picture Setting]
Selectapredenedsetofpicturecolorsettingsor
customize the personal setting.
• [Standard] - Original color setting.
• [Bright] - Vibrant color setting.
• [Soft] - Warm color setting.
• [Personal] - Customize the color setting. Set
the level of brightness, contrast, tint and color
saturation, then press OK.
[Volume]
Set a volume level when you play a disc.
1. Press OK.
2. Press to set the volume.
3. Press OKtoconrmandexit.
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
• [3D] - Select a virtual surround sound effect
that is produced from the left and right audio
channels.
• [Movie Mode] - Select a sound effect for movies.
• [Music Mode] - Select a sound effect for music.
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
• [Off] - Turn off CD-upsampling.
• [88.2kHz] - Convert to twice the original
sampling rate.
• [176.4kHz] - Convert to four times the original
sampling rate.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
• [On] - Enjoy quiet viewing at night.
• [Off] - Enjoy surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded DVDs.•
Video setup
EN
DVP3500K_98_EN_UM_V1.0.indd 14 2/21/2011 3:33:11 PM

15
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a disc menu language.
Note
If the language you have set is not available on the disc,•
the disc uses its own default language.
For some DVDs, the subtitle/audio language can only
•
change from the disc menu.
To select the languages that are not listed in the menu,
•
select [Others]. Then check the “Language Code” list
at the back of this user manual and enter the respective
language code.
[Parental Control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
Note
Rated DVDs above the level you set in•[Parental
Control] require a password to be played.
The ratings are country-dependent. To allow all discs to
•
play, select ‘8’.
Some discs have ratings printed on them but are not
•
recorded with ratings. This function has no effect on
such discs.
[PBC]
Turn on or off the content menu of VCDs/SVCDs
withPBC(playbackcontrol)feature.
• [On] - Display the index menu when you load
a disc for play.
• [Off] - Skip the menu and start play from the
rsttrack.
[Mp3/Jpeg Nav]
Selecttodisplaythefoldersordisplayalltheles.
• [View Files]-Displayalltheles.
• [View Folders] - Display the folders of MP3/
WMAles.
[My Wallpaper]
Select a picture as the wallpaper.
• [Default picture] - The default wallpaper
preset as the Philips logo.
• [Saved picture] - A captured video image or
JPEG photo.
• [Current picture] - Capture a video image or
JPEG photo and save it on the product.
1. Play a video or photo slideshow.
2. Select a video image or photo: press to
pause, and then press SETUP.
3. Navigate to the option ([Video Setup] >
[My Wallpaper] > [Current picture]).
4. Press OKtoconrm.
One video image or JPEG photo is saved as»
wallpaper.
A newly saved image or photo replaces the»
earlier one.
Preferences
Note
Stop disc play before you can access to•[Preferences].
1Press SETUP.
»[General Setup] menu is displayed.
2Press to select [Preferences], and then
press to enter the submenu.
3Select an option, and then press OK.
4Select a setting, and then press OK.
To return to the previous menu, press•
BACK.
To exit the menu, press• SETUP.
Preferences
Parental Control
Mp3/Jpeg Nav
PBC
Subtitle
Audio
Disc Menu
Password
Version Info
English
EN
DVP3500K_98_EN_UM_V1.0.indd 15 2/21/2011 3:33:13 PM

16
8 Additional information
Update software
For software updates, check the current software
version of this product to compare with the latest
software(ifavailable)atthePhilipswebsite.
Caution
Power supply must not be interrupted during software•
upgrade.
1Press SETUP.
2Select [Preferences] > [Version Info], and
then press OK.
3 Writedownthelename,andthenpress
SETUP to exit the menu.
4Visit www.philips.com/support to check for
thelatestsoftwareversion,usingthelename
for this product.
5Refer to the upgrade instructions on the
website for more information.
Note
Disconnect the power cord for a few seconds and•
connect again to turn on the product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners•
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipethediscwithamicrobrecleaningclothfrom
the centre to the edge in a straight line movement.
[Password]
Set or change the password for locked discs and
play restricted DVDs.
1. Press the Numeric buttons to enter ‘136900’ or
the last set password at [Old Password]eld.
2. Enter the new password at [New Password]
eld.
3. Enter the new password again at
[Conrm PWD]eld.
4. Press OK to exit the menu.
Note
If you forget the password, enter ‘136900’ before you set•
a new password.
[Version Info]
Display the software version of this product.
Note
Thisinformationisrequiredwhenyouwanttondout•
if a newest software version is available at the Philips
website that you may download and install on this
product.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental Control]
and [Password] settings.
EN
DVP3500K_98_EN_UM_V1.0.indd 16 2/21/2011 3:33:13 PM

17
9 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of the•
product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
support at www.philips.com/welcome.
If you contact Philips, you will be asked for the model
and serial number of your product.The model
number and serial number are on the back of your
product.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this unit do not work.
Disconnect this product from the power•
outlet for a few minutes, then connect again.
No reaction to the remote control.
Connect this product to the power outlet.•
Point the remote control at the IR sensor•
located on the front panel of this product.
Insert the batteries correctly.•
Insert new batteries in the remote control.•
Picture
No picture.
See the TVs user manual on how to select•
the correct input on the TV. Change the TV
channel until you see the Philips screen.
If you have turned on the progressive scan•
setting or change the TV system setting,
switchbacktodefaultmode:1)Press to
openthedisccompartment.2)Pressthe
Numeric button ‘1’(forprogressivescan)or
the Numeric button’3’(forTVsystem).
Specications
Note
Specicationanddesignaresubjecttochangewithout•
notice
Video
Signal system: PAL / NTSC•
Composite video output: 1 Vpp ~ 75 ohm•
Component video output: 0.7 Vpp ~ 75 ohm•
Audio
Analog stereo output•
Signaltonoiseratio(1kHz):>95dB•
(A-weighted)
DynamicRange(1kHz):>80dB(A-weighted)•
Crosstalk(1kHz):>80dB•
Distortion/noise:(1kHz):>75dB•
MPEG MP3: MPEG Audio L3•
Digital output•
Coaxial•
Main unit
Dimensions(wxhxd):360x39x209(mm)•
Net Weight: approximately 1.43 kg•
Power
Power supply rating: AC 110 - 240V~, 50/60HZ•
Power consumption: 10 W•
Power consumption in standby mode: < 1 W•
Accessories supplied
Remote control and batteries•
Audio/Video cables•
AC power cord•
User Manual•
Laser specication
Type:SemiconductorlaserInGaAIP(DVD),•
AIGaAs(CD)
Wavelength:655nm(DVD),790nm(CD)•
OutputPower:7.0mW(DVD),10.0mW•
(VCD/CD)
Beam divergence: 60 degrees•
English
EN
DVP3500K_98_EN_UM_V1.0.indd 17 2/21/2011 3:33:13 PM

18
10 Glossary
A
Aspect ratio
Aspect ratio refers to the length to height ratio of
TV screens. The ratio of a standard TV is 4:3, while
theratioofahigh-denitionorwideTVis16:9.
The letter box allows you to enjoy a picture with a
wider perspective on a standard 4:3 screen.
J
JPEG
A very common digital still picture format. A still-
picture data compression system proposed by the
Joint Photographic Expert Group, which features
small decrease in image quality in spite of its high
compressionratio.Filesarerecognizedbytheirle
extension ‘.jpg’ or ‘.jpeg.’
M
MP3
Aleformatwithasounddatacompression
system. MP3 is the abbreviation of Motion Picture
ExpertsGroup1(orMPEG-1)AudioLayer3.With
the MP3 format, one CD-R or CD-RW can contain
about 10 times more data than a regular CD.
P
PBC
Playback Control. A system where you navigate
through a Video CD/Super VCD with on-screen
menus that are recorded onto the disc. You can
enjoy interactive playback and search.
Progressive scan
The progressive scan displays twice the number of
frames per second than in an ordinary TV system.
It offers higher picture resolution and quality.
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by Microsoft
Corporation. WMA data can be encoded with
Windows Media player version 9 or Windows
Media player for Windows XP. Files are recognized
bytheirleextension‘.wma.’
Sound
No audio output from the TV.
Ensure that the audio cables are connected to•
the audio input of the TV.
Assign the audio input of the TV to the•
corresponding video input. See the TV user
manual for details.
No audio output from the loudspeakers of the
audio device (stereo system/amplier/receiver).
Ensure that the audio cables are connected to•
the audio input of the audio device.
Turn on the audio device to its correct audio•
input source.
Play
The disc cannot be played.
The disc is badly scratched, deformed, or dirty.•
Replace or clean the disc.
Usethecorrectdiscformatorleformat.•
The aspect ratio of the screen is not aligned with
the TV display setting.
Theaspectratioisxedonthedisc.•
EN
DVP3500K_98_EN_UM_V1.0.indd 18 2/21/2011 3:33:14 PM

© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
DVP3500K_98_UM_V1.0_1108
DVP3500K_98_EN_UM_V1.0.indd 20 2/21/2011 3:33:14 PM