Philips HQ-T 788 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Beard Trimmer
HQ-T 788
PRODUCT INFORMATION
Features :
- Contour Tracking System; comb adapts to the contours of the
face.
- Precision Zoom Lock; for precise adjustability of the comb in
9 lenghts between 1.5 mm and 18 mm.
- Beard length indication window.
- Pop-up precision trimmer for moustache and contouring.
- Corded mains operation and cordless rechargebale operation
possilble.
- Charging indication.
- Maintenance free cutting element: no oiling required.
- Three dimensional rounded teeth at skin side for max. comfort.
TECHNICAL DATA
Power system : 1 hour rechargeable and mains
Rechargeable:
Batteries : 1x AA NiCd
Charging period : NiCd batteries: 1 hour
Capacity : NiCd batteries: 40 minutes
Batteryfull indication : light blinks when battery is fully charged
Mains:
Voltage : Automatic voltage selection
(100 - 240 V / 50 - 60 Hz)
4322 277 00660
01/10
Product meets the requirements regarding
interference suppression on radio andTV.
NOTES :
* In order to guarantee the longest possible working
life of the battery :
- do not charge for more than 24 hours
- do not keep the charging unit permanently
plugged in
- discharge the battery completely once a year by
letting the motor run until it stops
* If the battery is empty and the consumer wants to
trim his beard, the trimmer has to be charged for
at least 1.5 hours to have enough power for one
trim
* The appliance should be charged again, when not
used for a long period

DISASSEMBLY ADVICE + PARTS LIST HQ-T 788
to replace SPRING ZOOM RING (6)
remove COMB (1)
SCREW A
COVER (7)
PROFILER (12)
COMB HOLDER (4)
ZOOM RING (5)
Never use again a deformed housing clamp (3).
After the product has been repaired, it should
function properly and has to meet the safety
requirements as laid down and offically established
at this moment.
to replace ON / OFF KNOB (8)
BATTERY (10)
PCB (9)
MOTION CONVERTER (11)
remove COMB (1)
CUTTER (2)
HOUSING CLAMP (3)
COMBHOLDER (4)
SCREW A
COVER (7)
ZOOM RING (5)
PROFILER (12)
CAP B
to replace PROFILER (12)
remove COMB (1)
SCREW A
COVER (7)
pos description service code
1 comb 4203 035 76430
2 cutter 4203 035 76420
3 housing clamp 4203 035 76410
4 comb holder 4203 035 76360
5 zoomring 4203 035 76350
6 spring zoom ring 4203 035 71380
7 cover 4203 035 76720
8 on/off knob 4203 035 76470
9 PCB 4203 035 76490
10 battery NiCd 4822 138 10336
11 motion converter 4203 035 76480
12 profiler 4203 035 76460
13 cleaning brush 4822 479 30183
14 cord set (EURO) 4822 321 10095
cord set (UK) 4822 321 10096
cord set (CND) 4822 321 10097
cord set (AUS/NZ) 4822 321 10148
cord set (USA) 4822 321 10344

EXPLODED VIEW HQ-T 788
A
12
11
9
8
13
7
10
14
1
4
6
2
3
5
B