Philips NORELCO AT810 User manual

IMPORTANT: PLEASE CHARGE
COMPLETELY BEFORE FIRST USE
NEW AT810
ELECTRIC WET & DRY
SHAVER OPERATION
GUIDE AND EXTENDED
SERVICE PLAN
NEW ITEM WAS CAREFULLY PACKAGED BY
SOLVING PRODUCTS, LLC, CERTIFIED RETAIL
PARTNER OF PHILIPS NORELCO.
WHAT IS UNBOXED?
Solving Products, LLC o ers brand-new products direct from manufacturer
for consumers at low economical prices. Shipped in smaller, environmentally
responsible packaging to reduce waste are only a few cost saving methods
used to create the Unboxed Advantage.
CUSTOMER SUPPORT
Solving Products customer support team is
knowledgeable and ready to help. Available
weekdays and weekends 24/7 by phone.
PLEASE DO NOT CONTACT ORIGINAL
MANUFACTURER DIRECTLY
Phone [phone]
Email [e-mail]
Website www.SolvingProducts.com
>
Customer oriented with exceptionally low
consumer pricing.
>
Streamlined package reduces waste result-
ing in low environmental impact.
>
1-Year extended service plan provided by
Solving Products LLC.
>
Customer support available over the phone
or visit out website.
IMPORTANT SAFETY N0TE
When using an electric product, basic precautions should always
be followed. To reduce the risk of electric shock: The power plug and
the accessories connected to it are not for immersion or for use
in shower. Do not use an extension cord with this product. Unplug
and remove power cord before cleaning. The batteries used in this
product may present a fire or chemical burn hazard if mistreat-
ed. Do not disassemble, heat above 100°C (212°F) or incinerate. To
reduce the risk of burns, fire, electric shock, or injury to persons:
Close supervision is required when this product is used by, on, or
near children, or persons with limited physical, sensory, or mental
capabilities or invalids. Use this product only for its intended house-
hold use as described in this manual. Do not use attachments not
recommended by Philips Nor th America LLC. Never operate this
product if it has a damaged power cord or charging plug, if it is not
working properly, if it has been dropped or damaged, or dropped
into water while plugged in. Keep the cord and power plug dry at all
times. Do not handle with wet hands. Only use the power plug, USB
plug and other accessories supplied with the product.
THANK YOU FOR YOUR NEW
SOLVING PRODUCTS PURCHASE
CONTACT SOLVING PRODUCTS LLC
Phone [phone]
Email [e-mail]
Website www.SolvingProducts.com
EXTENDED SERVICE PLAN
Pur chases are backed by
1-year extended service plan
ensuring products will be
free from defects in mate-
rial and workmanship for
one year from date of pur-
chase. Solving Products LLC
will repair or replace prod-
uct free of charge during this
year. Consumable compo-
nents (for example, shaver
heads) are excluded in this
plan. Service does not cover
equipment failure attributed
to accident, improper oper-
ation, misuse, abuse, or any
cause other than defects in
the materials or workmanship.

REPLACING THE SHAVING HEADS
OPERATION
OVERVIEW
Buttons explained for new Philips
Norelco AT810 shaver.
CHARGING & POWER
To prolong shaver lifespan charge
before first use and only when indicat-
on/o button once.
1.
Power shaver o by pressing on/
o button once.
2.
Connect shaver to supplied AC char-
ger only and any 100V-240V AC outlet.
3. Shaver display will indicate battery
is charging.
4.
Unplug shaver when charge indicator
flashes three continuous white lights.
LED DISPLAY
BATTERY CHARGE INDICATOR
A. Charging Indicator. B. Full Charge Indicator.
C. Low BatteryIndicator. D. Three continuous white lights.
E. Shaver Head Replacement
Indicator.
CLEANING
• Always clean your shaver after each use.
• Always switch shaver OFF, unplug and remove power cord before cleaning.
• Press the Shaver Head Release Button to open the Shaver Head Assembly.
• Clean inside shaving heads and hair chamber by running under hot water.
• Clean outside of Shaver Head Assembly by running under hot water.
• Never clean, remove or replace head assembly while motor is on.
• Regular cleaning guarantees better shaving results.
• Do not immerse shaver in water.
• While rinsing shaving heads, water may drip out of the base of shaver. This is a
normal occurrence.
• Do not apply pressure to combs. Do not touch shaving heads with hard
objects as this may dent or damage precision-made slotted combs.
• Do not use shaver if combs are damaged or broken. Facial injury may occur.
• Do not use compressed air, abrasives, scourers or aggressive liquids such
as gasoline or acetone to clean the shaver.
NOTE: THE ACCESSORIES SUPPLIED MAY VARY FOR DIFFERENT PROD -
UCTS. THE PACK AGE SHOWS ACCES SORIES THAT HAVE BEEN SUPPLIED
WITH YOUR PRODUCT.
1. Turn shaver OFF, remove the charging plug from the outlet and power cord
from the shaver.
2. Press the Shaver Head Release Button to open the Shaver Head Assembly.
3. Pull the shaving unit OFF the shaver.
4. Turn the lock counterclockwise to unlock.
5. Remove the shaving heads and place the new shaving heads in the shaving unit.
6. Replace the frame and turn the lock clockwise until it locks into place.
7. Insert the notch of the shaving unit into the slot in the top of the shaver.
shaver head replacement indicator symbol will go out.
• NOTE: If the shaving unit does not close smoothly, make sure you inserted the
shaving heads properly and that the retaining frame is locked.
AVAILABLE ACCESSORIES
AT810 SHAVER, CHARGER, OPERATION GUIDE,1-YEAR EXTENDED SERVICE.
AFTER EACH USE: TRIMMER
• Turn shaver OFF.
• Push down spring-release trimmer switch.
• Clean trimmer with the short-bristled side of the brush every time you use it.
Brush up and down along the trimmer teeth.
• Lubricate the trimmer teeth with onedrop of mineral oil every 6 months.
• Close trimmer by pressing trimmer down.
Lift and Cut System.
Shaver Head
Assembly.
Protective Cap.
Individually
Floating
Heads.
Shaver Head
Release Button.
• Hair Chamber
captures shaven
hair .
Electronic
ON/OFF Button.
Shaver Head
Replacement Indicator.
LED Charge
Indicators.
• Battery Charge, Full,
Low & Quick Charge
Indicators.