Philips EasySpeed Plus GC2078 series User manual
Always there to help you
EasySpeed Plus Cordless
GC2078-GC2089 series
Specifications are subject to change without notice
© 2014 Koninklijke Philips N.V.
All rights reserved.
User manual
4239 000 93321
ENGLISH
c
d
g
h
i
e
f
b
a
m j
k
l
2 3 4 5
9
7 86
10 11 12 13
14 15 16 17
18
EasySpeed Plus Cordless GC2078-GC2089 series
ENGLISH 6
14
23
TÜRKÇE 33
41
Important
carefully before you use the appliance. Save both documents for future
reference.
General description (Fig. 1)
1 Spray nozzle
3 Steam control
- CALC CLEAN = Calc-Clean function
-
- = optimal steam
- = maximum steam
- = turbo steam
4 Steam boost button
5 Spray button
6 Temperature dial
7 Type plate
8 Water tank with MAX water level indication
9 Soleplate
11 Base
13 Mains cord
Using the appliance
Filling the water tank
Note: Your appliance has been designed to be used with tap water. In case
you live in an area with hard water, fast scale build-up may occur.Therefore,
it is recommended to use distilled or de-mineralized water to prolong the
lifetime of your appliance.
Note: Do not add perfume, water from tumble dryer, vinegar, magnetically
treated water (e.g.,Aqua+), starch, descaling agents, ironing aids, chemically
descaled water or other chemicals as they may cause water spitting, brown
staining, or damage to your appliance.
6ENGLISH
7
ENGLISH
1 Set the steam control to position . (Fig. 2)
2 Fill the water tank up to the MAX indication (Fig. 3).
3
Selecting temperature and steam setting
Table 1
Fabric type Temperature
setting
Steam
setting
Steam
boost
Spray
Linen MAX , Ye s Yes
Cotton 3, Ye s Ye s
Wool 2No Ye s
Silk 1No No
Synthetic fabrics
polyamide, polyester).
1No No
Note: As indicated in the table above, do not use steam or steam boost at a
low temperature, otherwise hot water may leak from the iron.
1 Consult table 1 to set the temperature dial to the appropriate
setting for your garment (Fig 4)
2 Consult table 1 to select a steam setting that corresponds to the
temperature you have set. (Fig. 5)
3 Place the iron on its base and connect the base to a power socket.
(Fig 6.)
Note: Make sure that the base sits on a stable and level surface. It is
recommended to place the base on the soft part of the ironing board.
8
ENGLISH
4
up. (Fig 7.)
5
Operation of Smart Charging base
The iron is equipped with Smart Charging base. The light will indicate
25 seconds to ensure a good wrinkle removal performance. Please
refer to table 2 for the operation of the base.
Note: to ensure good wrinkle removal performance, always put the iron on
its base during the resting period. Do not place the iron on its heel. (Fig.9)
Table 2
Light status Iron status Instructions
Wait for iron to be ready.
Steady blue Ready for use
The iron needs to
Put the iron back to the
types only)
Safety auto-off has
been activated
Refer to Chapter
“Features”, section “safety
auto-off”.
Features
Spray function
-
Steam boost function
- Press and release the steam boost button for a powerful boost of
9
ENGLISH
- For optimal steam boost performance, it is recommended to press
Vertical steam
- You can use the steam boost function when you hold the iron in
Dry ironing
- Set the steam control to
- The iron switches off automatically if the iron is not in use for
the safety auto-off mode is activated.
-
base) and put it back to the base.
Cleaning and maintenance
Cleaning
1 Set the steam control to
down. (Fig. 2)
2 Pour any remaining water out of the water tank.
3
cloth and a non-abrasive (liquid) cleaning agent.
the soleplate.
Note: Regularly rinse the water tank with tap water. Empty the water tank
after rinsing it.
10
ENGLISH
Calc-Clean function
IMPORTANT: To prolong the lifetime of your appliance and
to maintain good steaming performance, use the Calc-Clean
function once every two weeks. If the water in your area is
ironing), use the Calc-Clean function more frequently.
1 Make sure the steam control is set to . (Fig. 2)
2 Fill the water tank to the MAX indication. (Fig. 3)
Do not pour vinegar or other descaling agents into the water tank.
3 Set the temperature dial to MAX. (Fig. 13)
4
(Fig. 6)
5 Remove the iron when the light ring turns steady blue. (Fig. 8)
6 Hold the iron over the sink. Push the steam control to the Calc-
Clean position and hold it. (Fig. 14)
7 Gently shake the iron while holding the steam control until all
water in the water tank has been used up. (Fig. 15)
out of the soleplate.
8 Set the steam control back to . (Fig. 2)
Note: Repeat the Calc-Clean process if the water that comes out of the iron
still contains scale particles.
After the Calc-Clean process
1 Put the iron on the base. Let the iron heat up to dry the soleplate.
2 Take the iron from the base when the light ring turns steady blue.
11
ENGLISH
3 Move the iron gently over a piece of cloth to remove any water
stains on the soleplate.
Storage
1 Set the steam control back to . (Fig. 2)
2 Pour out any remaining water from the water tank.
3 Unplug the mains cord and wind the mains cord around the base.
(Fig. 16)
could still be hot.
4 Put the iron on the base. Lock the iron to its base. (Fig. 17)
5 Let the iron cool down before you store it.
Troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem
with the information below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Centre in
Problem Possible cause Solution
The iron does
not produce
steam.
Cordless iron cools
down after a while. It
Put the iron back to the
The steam control is
set to .
Set the steam control to
the appliance”).
The water tank is empty. Fill the water tank.
12
ENGLISH
Problem Possible cause Solution
temperature of below
2 dots.
Consult Table 1
the appliance” for
temperature and steam
The iron leaks. Cordless iron cools
down after a while. It
Put the iron back to its
base to heat up and dry
the soleplate.
steam boost at a low
temperature.
Put the iron back to its
base to heat up and dry
the soleplate.
Consult Table 1 for use
of steam and steam
boost.
You have used the
steam boost function
too often within a very
short period.
Put the iron back to its
base to heat up and dry
the soleplate. Use the
steam boost function
less frequently.
The water tank is
tank beyond the MAX
indication.
properly.
Make sure that the
closed properly.
Flakes and
impurities come
out of the soleplate
You have not
performed Calc-Clean
function for some time.
The iron need to be
cleaned.
Use the Calc-Clean
function (see chapter
maintenance’, section
‘Calc-Clean function’).
13
ENGLISH
Problem Possible cause Solution
When I push the
steam control to
the turbo steam
position, the
steam control
jumps back.
This is normal.
The turbo steam is
control in the turbo
steam position while
is not necessary.
Only part of
auto-off mode.
This is normal.This
is intended to save
off mode.
N/A
The base is not
I place the iron
on it.
The iron is not
connected to the base
properly.
Take out the iron and
put it back to the base
-CALC CLEAN
-
-
-
-
: .
, . ,
.
: , ,
, Aqua+), , ,
,
, ,
.
14
15
1
2
3
,
3,
2
1
1
: ,
,
.
1
2
3
16
: .
.
4
5
:
.
. (9-.)
17
-
-
-
-
-
-
-
1
2
18
3
: .
.
1
2
3
4
5
6
19
7
8
:
, .
1
2
3
1
2
3
4
5
)
20
21
22
Булы үтік
Бақылауда жасап шығарған: “Philips Consumer Lifestyle B.V.”, Туссендиепен 4, 9206 АД, Драхтен,
Нидерланды
Импортшы:
«ЖШҚ Филипс», Сергей Макеев көшесі, 13 үй жән
е
123022 Мәскеу қаласы, Ресей Құрамасы, тел. +7 (495) 937 93 00
GC20XX -> 2000-2400W; 220-240V, 50-60H
z
Үйде пайдалануға арналған.
Ток соғудан қорғау класы: 1-класс
Өнімнің жасалған күнін сериялық нөмірін анықтауға болады (xxxxYYWWxxxxxx, мұнда YY – жыл,
W
W – апта нөмірі, x – кез келген таңба). Мысалы: AJ021025123456 – жасалған күні: 25 апта 2010 жыл.
Жасалған күні кейбір үлгілерде мынадай кодтар түрінде басылуы мүмкін: YYWW, YYWWx, YYWWx
x
немесе xYYWWxxxx. Өнімнің жасалған күнін анықтау қиын болған жағдайда қолдау алу үшін Philip
s
компаниясының қоңырау шалу орталығына хабарласыңыз
.
Other manuals for EasySpeed Plus GC2078 series
1
This manual suits for next models
2
Table of contents
Other Philips Iron manuals
Philips
Philips GC130 Series User manual
Philips
Philips Premium GC4440 User manual
Philips
Philips GC1115/02 User manual
Philips
Philips HI5914/30 User manual
Philips
Philips GC4930/10 User manual
Philips
Philips Diva GC120 Series User manual
Philips
Philips HI228/22 User manual
Philips
Philips GC8600 Series User manual
Philips
Philips GC360 User manual
Philips
Philips Azur GC4340 Manual
Philips
Philips GC4720 User manual
Philips
Philips GC7011 User manual
Philips
Philips GC6603/21 User manual
Philips
Philips Provapor GC6268 User manual
Philips
Philips Mistral GC2225 User manual
Philips
Philips HI424/23 User manual
Philips
Philips Perfect Care Elite Plus GC9660 User manual
Philips
Philips RI4415/12 User manual
Philips
Philips Azur FreeMotion GC4595/40 User manual
Philips
Philips GC4900 User manual
