Philips HI 910 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Provapor elance
HI 910
SAP coding HI 910
PRODUCT INFORMATION
Feataures : inox sole plate
boiler capacity 1 litre
length steam hose 1,9 metre
length cord set 1,9 metre
maximum steam output 50 gr/min
Voltage : 220-240Volt
Frequency : 50-60 Hz
Power consumptium : Boiler : 1200 Watt
Pressure : 2 bar
Iron : 800 Watt
4322 277 00121
99/10
PCS 101 312
Product meets the requirements regarding interference
suppression on radio and television.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as laid
down officially established at this moment.
!Service
Information

PCS 101 313
EXPLODED VIEW IRON
Screws : d x 1
A 3.5 x 12
B 3.5 x 14 (3x)
C M4 x 124(3x)
B
B
B
C
C
A
DAP0996
3
2
6
13
9
9
14
7
12
5
4
13
11
15
10
1

PARTS LIST IRON
Pos Description Service Nummer
Inlay
Micro switch
Steam command lever
Therm. dial
Extention piece
1
2
3
4
5
9965 000 01887
9965 000 01888
9965 000 01680
9965 000 01681
9965 000 01682
Handle
Rattle
Skirt
Soleplate
Lamp
6
7
8
9
10
9965 000 01683
4822 492 71445
9965 000 01684
9965 000 01685
9965 000 01686
Ball swivel
Back plate
Thermostat
Spring clamp
Intermediate cable
11
12
13
14
15
9965 000 01687
9965 002 01689
9965 000 01690
4822 492 71001
9965 000 01691
Safety
cut out
TABLE UNIT IRON
Steam-
switch
Thermostat
Thermostat
Steam-
valve

DISASSEMBLY ADVISE IRON
PCS 101 314
BACK PLATE 12
remove SCREW A
INLAY 1
remove LAMP 10
remove MICRO SWITCH 2
ADJUSTMENT AND CONTROLS
Thermostat 13
Thermostat ( 13 ) supplied as a spare part or fitted to
the sole plate ( 9 ) has already been a djusted by the
supplier and secured by glue.
To avoid disfunction of the iron , NEVER readjust the
thermostat.
HANDLE 6
remove THERM. DIAL 4
remove SCREW B (4x)
unlock HANDLE carefully
SKIRT 8
remove ELECTRICAL
WIRES
remove EXTENSION
PIECE 5
remove SPRING CLAMP
FROM STEAM HOSE
remove SCREW C (3x)
Bend back the contact points
THERMOSTAT 13
ONLY
cut CONDUCTOR A
at location P
remove SCREW D
P
Q
BA
D
ASSEMBLY
REQUIREMENTS
THERMOSTAT 2
Instead of metal conductor A,
the new thermostat has a wire
with AMP clamp.
After fixing screw D, connect
the AMP clamp to tag Q.
After assembling SKIRT 8
ALWAYS turn conductor B
through 180 degrees.
NOTE :
For opening you need aTorx screwdriver 362TR
T20 x 100.

EXPLODED VIEW STAND
PCS 101 315
E
D
DAP0998
22
23
21
24
26
27
25
28
30
27
29
31
33
32
34

PARTS LIST + DISASSEMBLY ADVICE STAND
Pos Description Service Nummer
Stand rubber feet
Rubber feet above screw
Complete tray
Safety valve
Rubber ring in filling hole
21
22
23
24
25
9965 000 01692
9965 000 01702
9965 000 01703
9965 000 01704
9965 000 01782
Cover
Rubber feet boiler
Boiler complete
Locked insert
Bottom housing
26
27
28
29
30
9965 000 01783
4822 462 71999
9965 000 01784
9965 000 01788
9965 000 01789
Filter
Switch
Electro valve
Cordset Italian plug
Cordset Europe plug
31
32
33
34
9965 000 01790
9965 000 01791
4822 218 11561
9965 000 01792
9965 000 01793
GBR, FRA, DEU, NLD,
ESP, PRT, ITA
DFU 4222 001 92201
OPENTHE STAND
D
Below rubber feet
remove SCREW D (1 x)
E
EE
removeSCREW E (3 x)
removeLOCKED INSERT 29
NOTE:
OPEN NOWTHE STAND.
DON’T WORRY IF THE SNAPS ATTHE SIDE WILL BE
BROKEN.
THEY ARE ONLY FORTHE ASSEMBLY.
THE STAND REMAINS CLOSEWITHOUTTHESE SNAPS.
ADJUSTMENT AND CONTROLS
–To avoid leakage of the sealings and damage to
the components in and on the boiler, NEVER clean
the boiler with vinegar, a descaling agent or other
chemicals.
–The boiler doesn’t contain serviceable parts.
Never disassemble the boiler body and /or compo-
nents on and in the boiler.
–ALWAYS REPLACE THE BOILER ( 28 ) WHEN:
*the mechanical safety valve ( 24 ) has been acti-
vated.
*the boiler thermostat or hand - resettable safety
thermostat are open, because the boiler has
been subjected to too high temperatures.
*the electrovalve ( 33 ) fails or the sieve is soiled
with scale.
–After the product has been repaired, it should func-
tion properly and has to meet the safety require-
ments as laid down and officially established at this
moment.