Philips SmartMeeting PSE0501 User manual

Get your smart AI meeting
assistant
Start your free trial now!
1Go to https://smartmeeting.sembly.ai
2Sign up
3 Enter the serial number of your device (you can nd it on
the packaging or the device itself)
4Use the code “SM2022D1” to activate your Team Plus plan (unlimited
number of meetings in the rst month, then up to 4 meetings per month)
IN R12V
2 4 5 11
8
76
910 11 12 13
3
6
1. Speaker
2. USB Type-C port (input)
3. Reset
4. Power socket
5. USB Type-C port (output)
6. Microphones
7. USB status LED
8. Battery status LED
9. Power
10. Volume down
11. Volume up
12. Mute
13. Bluetooth
© 2022 Speech Processing Solutions GmbH. All rights reserved.
This product has been manufactured for and is sold under the responsibility of Speech Processing
Solutions GmbH, and Speech Processing Solutions GmbH is the warrantor in relation to this product.
Specications are subject to change without notice. Philips and the Philips shield emblem are
registered trademarks of Koninklijke Philips N.V. and are used under license.
Document version 1.0, 04/21/22
User
manual
For more support visit
www.dictation.philips.com/pse0501help
User manual
Wireless Conference
Microphone
with Sembly Meeting
Assistant
PSE0501
SmartMeeting

To reset the device, press and hold the reset
button on the back side of your device by using a
small, pointed object, for example, a paper clip
Press to mute yourself
Press or to change
the volume of the speaker
IN R12V
R
IN R12V
IN
You can use the “IN” USB Type-C port to connect
a second PSE0501 device (cable not included) to
further increase the range
Hold for 1 second,
to disconnect from
the current device
5
4
Go to the bluetooth
settings of your device
and choose "PSE0501"
in the list
3
1 sec
starts blinking blue and
the speaker says "pairing"
2
1
6
stops blinking and
lights up blue. The
speaker says "connected"
To fully unpair, go to the
bluetooth settings of your
device and remove "PSE0501"
1 sec
Press to turn
the device on
IN R12V
Connect the USB cable to the “USB / OUT”
port of the device and to a computer.
Note: The device can only be charged via
the AC adapter
You can now use the
device with various
meeting software, by
selecting "PSE0501"
12
3
1 sec
Press to turn the device on
IN R12V
123
Connect the AC adapter to the
device and a power socket
The LEDs on the top of the
device indicate the battery
status and stop blinking after
the device is fully charged
Connect the correct plug
to the AC adapter