Philips SA1VBE08KA/02 User manual

Philips GoGear audio player
Quick start guide
SA1VBE02
SA1VBE04
SA1VBE08
SA1VBE16

Need help?
Please visit
www.philips.com/welcome
where you can access to a full set of supporting materials
such as user manual, the latest software upgrades and answers
to frequently asked questions.

Contents
2 Register your product
3 What’s in the box
4 Overview of the controls and connections
6 Connect and charge
8 Install software
9 Turn GoGear Vibe on
10 Navigate and play
12 Transfer and organize
13 Napster
14 Audiobooks
17 Update GoGear Vibe
18 Need help?
18 Disposal of your old product and the
integrated battery
EN
1

2
Register your product
Since it is possible for you to upgrade your product, we recommend
that you register your product on www.philips.com/welcomeso we can
inform you as soon as new free upgrades become available.

3
EN
What’s in the box
Earphones USB cable
CD-ROM
Philips GoGear audio player
Quick start guide
Quick start
guide
What else you’ll
need:
Computer
You need a computer with the following
minimum requirements:
Windows XP (SP2 or above) / Vista•
Pentium III 800MHz processor or higher•
512 MB RAM•
500MB hard disk space•
Internet connection•
Windows® Internet Explorer 6.0 or later•
CD-ROM drive•
USB port•

4
Overview of the controls
and connections
ADEBC
FGHIJK

5
EN
ARESET press: reset GoGear Vibe
B3 / 4press: scroll up/down
press and hold: scroll up/down at high speed
Czslide and hold: turn GoGear Vibe on/off
slide: lock/unlock all buttons except - VOL +
Ddisplay
E- VOL + press: increase/decrease the volume
press and hold: increase/decrease fast
FOPTIONS view available options
G2; press: play/pause
HUSB connection jack
IOpress: back one level
press and hold: return to main menu
Jpheadphone jack
KMIC microphone

6
Connect and charge
Connect the USB plug of the supplied1
USB cable to a spare USB port on
your computer.
Connect the small USB plug of the2
USB cable to the small USB jack on
GoGear Vibe.
Turn on your computer.3
GoGear Vibe charges.>
Note
For rst-time use, allow GoGear Vibe to charge for 3 hours.•
The charging animation stops and the•icon is displayed
when the charging process is completed.

7
EN
Connect GoGear Vibe to your computer.1
Insert the CD that comes with GoGear Vibe into the CD-ROM2
drive of your computer.
Follow the on-screen instructions to complete the installation3
of the software.
If the installation program fails to start automatically:
Browse the CD contents with Windows Explorer.1
Double click on the le ending with ‘.exe’.2

8
Install software
GoGear Vibe comes with the following software:
Philips Device Manager (helps you get rmware updates for •
GoGear Vibe)
Media Converter for Philips (helps you convert and transfer•
video les for GoGear Vibe)
Windows Media Player (helps you convert and transfer music•
les for GoGear Vibe)
Important
Remember to install the software provided in the supplied•
CD-ROM for music and/or video transfer.
Before installing the software, check that your computer•
meets the requirements.