Philips DTR4610 Operating instructions

DTR4610/08
MANUELE D'UTILIZZO
USER MANUAL
PHILIPS
4610_A5_COV.qxp 14/04/2005 13:47 Page 1

Meaning of symbols
Important information:
Must be read and understood.
The "Material recyclability symbol" means the package cardboard or User manual
paper is recyclable.
The "Material recyclability symbol" affixed on plastic parts means these parts are
recyclable.
The "Green Dot" affixed on cardboard means PHILIPS pays a financial duty to the
"Avoidance and Recovery of Packaging Waste" organization.
This receiver contains a large number of materials that can be recycled. If you are
disposing of an old receiver, please take it to a recycling centre.
Safety and environmental instructions
Your receiver has been manufactured to meet the appropriate safety standards, but the
instructions below should be followed to operate it safely.
These instructions must be kept for future reference.
- Before connecting the receiver to the mains, check that the mains supply voltage corresponds
to the voltage printed on the rear of the receiver. If the mains voltage is different, consult the
dealer.
- The receiver does not contain any user-serviceable parts. All maintenance work must be
carried out by qualified personnel.
- If you disconnect the receiver from the mains, make sure to unplug it from the wall socket and
not just from the AC socket at the back of the unit. Children could seriously injure themselves,
as the free end of the cable is still alive.
- Unplug the receiver during lightning storms.
- To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
- The receiver should be placed on a firm surface, and the ventilation openings must not be
covered with items such as newspapers, table clothes, curtains, etc.
- Do not install the receiver near any heat sources such as radiators, stoves or any other
apparatus that produces heat. Protect it from direct sunlight.
- When installing the receiver, ensure there is a gap of approximately 2.5 cm around the receiver
to enable air to circulate freely and prevent overheating.
- Leave accessible the mains connector at the back of the unit in case emergency shutdown is
required.
- Do not place any combustible objects on the receiver (candles, etc.).
- No objects filled with liquids, such as vases, should be placed on the unit. The receiver should
not be exposed to dripping or splashing. Should this happen, disconnect your receiver from the
mains and consult your dealer.
- Make sure that children do not place any foreign objects in any of the openings.
- For cleaning, use a soft, damp (not wet) cloth. Never use any abrasive cloth or aerosol cleaners.
English
SAFETY INSTRUCTIONS 1
4610_A5_GB.qxp 14/04/2005 15:48 Page 1

Contents
English
2CONTENTS
Meaning of symbols ___________________1
Safety and environmental instructions___1
Contents_____________________________2
1 Unpacking _______________________3
2 Installation guide _________________3
3 Product description_______________6
3.1 Front view ______________________6
3.2 Rear view_______________________7
4 Remote Control __________________8
5 Day to Day operation _____________9
5.1 Turn ON your receiver or switch to low
power _________________________9
5.2 Wake up your receiver or switch to
standby ________________________9
5.3 Change channel __________________9
5.3.1 Using number keys ________________9
5.3.2 Using P+ and P-__________________9
5.3.3 Using the channel list(s)_____________9
5.3.4 Using BACK (last channel recall) ______9
5.4 Selecting digital TV or digital Radio__10
5.5 Channel Banner_________________10
5.6 Changing the current programme
options________________________11
5.7 How to Run MHP Interactive
Applications ____________________11
6 Main Menu _____________________12
6.1 Menu navigation ________________13
6.2 Channel manager _______________13
6.3 Timer manager _________________14
6.4 For Parents ____________________15
6.4.1 Decoder Lock___________________15
6.4.2 Parental Control _________________15
6.4.3 Change your PIN code____________15
6.5 Data channels __________________15
6.6 Your preferences________________15
6.6.1 Display options __________________16
6.6.2 Language options ________________16
6.7 Installation _____________________16
6.7.1 Local Time _____________________16
6.7.2 Settings ________________________16
6.7.3 Signal meter ____________________18
6.7.4 Channel Search__________________18
6.7.5 Decoder Status__________________18
6.7.6 Factory Reset ___________________18
6.8 Help__________________________18
7 Advanced Settings_______________19
7.1 Easy Recording _________________19
7.2 Remote control setting ___________20
8 Troubleshooting guide ___________21
9 Technical Specifications __________22
4610_A5_GB.qxp 14/04/2005 15:48 Page 2

English
UNPACKING 3
1 Unpacking
As you unpack your receiver, please make sure the following accessories are included:
Remote control Mains cord SCART cable Phone cord RF cable
with batteries (adapter not
supplied)
The package also includes the following documents:
- User Manual
- Philips World-Wide Guarantee
Plastic bags can be dangerous. To avoid suffocation keep the bag away from babies and
children.
2 Installation guide
Please refer to the safety section before connecting your receiver.
TV set
Video recorder
Terrestrial
receiver
4610_A5_GB.qxp 14/04/2005 15:48 Page 3

English
4INSTALLATION GUIDE
The smart card golden or silver contacts must
be facing up at card insertion.
The "crossed-out wheeled bin" means separate
disposal is required for the receiver, accessories
and used batteries. They mustn't be disposed of
with your household waste. Please, inquire about the local
regulations.
For information: the Philips batteries supplied with your
receiver remote do not contain hazardous substances
such as Mercury, Cadmium, or Lead.
1Disconnect your TV set and recorder from the mains.
2Integrate your receiver in your existing installation as
shown on the above diagram.
3Insert the two batteries supplied in your remote control.
4Reconnect your TV set and recorder to the mains. Do not
connect your receiver to the mains yet!
5Switch on your TV set and select a channel.
6Plug the receiver's power supply cord to the mains. The
receiver front panel green LED gets on.
7Now you should see the Welcome screen on your TV
screen. After a few seconds, the Welcome screen
disappears.
8Then, a screen appears, that allows you to select the
language. Highlight the desired language by pressing Vor
W, and then press OK.
You are prompted to confirm your choice by pressing OK
again.
4610_A5_GB.qxp 14/04/2005 15:48 Page 4

English
INSTALLATION GUIDE 5
9Next, highlight the country where you operate the
receiver by pressing Vor W, and then press OK.
You are prompted to confirm your choice by pressing
OK again.
10 The next screen is used to select both the TV screen
format corresponding to your TV set and update mode.
Highlight the appropriate format by pressing Cor B,
then move to the update mode selection using Vor W,
and highlight Yes to allow for automatic software
upgrade. Alternatively, highlight No if you prefer to be
notified when software upgrade is available. Press OK to
initiate the channel search.
Search operation is indicated by segments moving around
the display.
11 Once it has been completed, follow the prompts
displayed on the screen.
Press OK to store the channels found and tune the
receiver to the first found TV channel.
Now you are ready to enjoy viewing digital terrestrial TV.
Refer to chapter 5 and 6 to learn more about using your
receiver.
4610_A5_GB.qxp 14/04/2005 15:48 Page 5

English
6PRODUCT DESCRIPTION
3 Product description
3.1 Front view
1Smartcard slot
2LOW POWER button: Switch the receiver on or to "low power".
3TV/RADIO button: Toggle between digital TV and digital radio.
4"-" button: Channel down.
5Bicolour LED: Display receiver status (see status indicator table).
6Red LED Display receiver status (see status indicator table).
Blink at remote control command reception.
7"+" button: Channel up.
STATUS INDICATOR TABLE
Note: if the red LED is blinking while your receiver is in "Standby", it indicates that an upgrade of your
receiver software is taking place. Do not interrupt this operation. Wait for the green LED to light up,
indicating successful upgrade, and then continue as normal.
Your receiver, as any electronic equipment, consumes power. In order to reduce power
consumption, please switch your receiver to either Standby or "Low Power" whenever you
are not using it. For maximum energy saving we recommend you switch off the receiver by
unplugging it from the mains if you are not using it ffoorraalloonnggttiimmee.
Indicator
Mode Red LED Bicolour LED
Low power red
Standby Orange
TV/Radio mode green
Download in progress Blinking red
Timer active when receiver on red green
Timer active when receiver in standby red orange
123
456 7
4610_A5_GB.qxp 14/04/2005 15:48 Page 6

English
PRODUCT DESCRIPTION 7
3.2 Rear view
1Telephone Line*** (3) To connect the supplied telephone cord to be connected to
your telephone line using the appropriate adapter (adapter not
supplied).
2VCR SCART* (1) To connect a SCART lead to be connected to the SCART socket
input (EXT1) of your VCR or DVD Recorder.
3Digital Audio* To connect to one of the digital audio input of your HiFi /audio
receiver system.
4Serial* Data interface used during servicing.
5Aerial In* To connect the plug of your aerial cable.
6230V~50Hz 15W max** To connect the supplied mains cord to be connected to the
power socket.
7Label Type and serial number of your receiver.
8TV SCART* (1)(2) To connect the supplied SCART lead to be connected to the
SCART socket input of your TV set.
9L/R Audio Output* To connect to the Left/Right audio Cinch inputs of your
HIFI/audio receiver system.
10 RF Out* To connect the supplied RF coaxial cable to be connected to the
aerial input socket of your TV or VCR.
* Safety Extra Low Voltage
** Hazardous Voltage
*** Telecommunication Network Voltage 3
(1) SCART is also called Euroconnector or Peritel.
(2) The supply SCART lead is suited for RGB format, which allows the best picture quality. Consult the
user manual of your TV set to select its RGB capable SCART socket input.
(3) This equipment has been approved pursuant to Commission Decision 99/303/EC for pan-
European connection to the public switched telephone network (PSTN). However, due to
differences between the individual PSTNs provided for in different countries, the approval does
not, of itself, give an unconditional assurance of successful operation on every PSTN network
termination point. In the event of problems, you should contact your equipment supplier in the
first instance.
67 8 910
12345
4610_A5_GB.qxp 14/04/2005 15:48 Page 7

English
8REMOTE CONTROL
4 Remote Control
AA+/-
Increase/Decrease the volume
level.
0-9 number keys
- In viewing mode: select channels.
- In menu: directly select a menu
item or set a setting.
- In standby: wakes up the
receiver.
44
Open the Options menu to
momentarily change the
soundtrack, subtitles, teletext, or
display format setting.
Standby 22
Switch your receiver into the
standby mode.
RED, GREEN, YELLOW, BLUE
Contextual keys used in MHP
applications.
INFO
Switch between viewing, Channel
Banner, and Channel Banner with
Extended Info.
MUTE c
Mute the sound on your TV or
receiver.
BACK
- In viewing mode: return to the
previously tuned channel.
- In menu mode: return to the
previous screen.
EPG
Open/Close the Programme Guide.
TV/STB
Toggle between watching
terrestrial digital TV via your
receiver and standard analogue TV
via your TV set.
VW
- Switch the Channel Banner in
the browsing mode.
- Scroll up/down in a menu or
channel list.
CB
In Channel Banner: switch
between the current and next
programme.
OK
Confirms your choice.
EXIT
Return to normal viewing. If EXIT
is pressed and held for at least 2
seconds, the current application is
closed and normal viewing is
resumed. The "Autostart" status is
then switched off temporarily until
the receiver tunes to this channel.
TEXT
Contextual key used in MHP
applications.
ii
Open the Options menu to
momentarily change the
soundtrack, subtitles, teletext, or
display format setting.
MENU
Open/Close the Menu.
REC
Open the Setting a Timer screen.
RADIO
- In viewing mode: toggle between
TV and Radio.
- In standby: wakes up the
receiver.
FAV
Open/Close the current channel
list.
P+/P-
- In viewing mode: tunes the
next/previous channel within the
current channel list.
- In channel lists: scrolls one page
up/down.
- In standby: wakes up the
receiver.
4610_A5_GB.qxp 14/04/2005 15:48 Page 8

5 Day to Day operation
5.1 Turn ON your receiver or switch to low power
While your receiver is in "low power", the only way to turn it on is to press the LOW POWER
button on the front panel.
While watching digital TV or listening to digital radio, press the LOW POWER button on the
front panel to switch your receiver to "low power".
5.2 Wake up your receiver or switch to standby
While watching digital TV or listening to digital radio, press the standby key of the remote control
to switch your receiver to standby.
While your receiver is in standby, to wake it up:
- Either press the P+, P-, RADIO or any number key of the remote control.
- Or press the PROG-/PROG+ or TV/RADIO button on the front panel.
5.3 Change channel
When you are watching digital TV or listening to digital radio, there are different ways of changing
channel.
5.3.1 Using number keys
Enter the desired channel number using number keys.
5.3.2 Using P+ and P-
Press P+ to select the next channel in the current list, or P- to select the previous channel in the
current list.
Note: Skipped channels cannot be selected using PP++or PP--; they can only be selected either using the
number keys or from a channel list.
5.3.3 Using the channel list(s)
- Press the FAV key to open the current channel list.
- Scroll to the desired channel, and then press OK to
select it.
- Alternatively, press FAV, and then use the Cor Bto
enable another channel list to choose from.
Note: empty lists are not displayed.
TV Channel List
5.3.4 Using BACK (last channel recall)
Press the BACK key to return to the previously selected channel.
English
DAY TO DAY OPERATION 9
4610_A5_GB.qxp 14/04/2005 15:48 Page 9

English
5.4 Selecting digital TV or digital Radio
To switch between digital TV and digital Radio, press the RADIO key.
5.5 Channel Banner
Channel Banner Icons
This icon informs that some program information is available for the program
displayed in Channel Banner.
This icon informs that the current channel is locked.
This icon informs that a viewing reminder has been set for a particular program.
This icon informs that a recording reminder has been set for a particular program.
This icon informs that a program with more than one soundtrack is broadcast.
This icon informs you that pressing OK tunes to the channel that the Channel
Banner refers to, or sets/cancels a reminder.
This icon informs you that the program is broadcast with AC3/Dolby Digital sound.
This icon informs you that the particular program is parentally locked.
This symbol informs that you may launch external applications by pressing OK.
This icon informs you that an mhp application is loading.
This icon informs that teletext is broadcast on the currently tuned channel.
This icon informs that you may select subtitles for the current program.
This icon informs that you may select subtitles intended for deaf or hard-of-hearing
viewers for the current program.
This icon informs you that the current channel is scrambled.
10 DAY TO DAY OPERATION
Channel Number
Program Name
Channel Name
Channel Number
Current Time & Date
Icons
Progress Bar
End Time
Start Time
4610_A5_GB.qxp 14/04/2005 15:48 Page 10

English
DAY TO DAY OPERATION 11
5.6 Changing the current programme
options
Press the 44or iikey to access the Options menu.
This menu allows you to change the Audio Language,
Subtitle Language, or the Display Format for the
current programme, and the Teletext Language for the
current channel.
Option Menu
5.7 How to Run MHP Interactive
Applications
Your receiver supports downloading and running MHP
interactive applications. Some applications are run
automatically on tuning to a respective channel. Other
applications need to be launched manually.
If you tune to a channel on which interactive applications
are broadcast, you will see the icon on the
Channel Banner. This icon is displayed alternately with
the icon if applications are run automatically or
with the icon otherwise. Simultaneously the
front panel will display the MHP indication.
Interactive Applications Icon
In case of manual applications pressing OK brings up the
Applications window allowing you to select the
application you want to run. Once you select the
application, press OK again. However, if you are not
interested in running interactive applications, press EXIT
to remove the Applications window from the screen.
Once the application is running follow the instruction
given by the application played on screen.
To quit the interactive application, press and hold the
EXIT key for at least 2 seconds. You can also quit the
application by following the on-screen descriptions
brought to you by the application itself or tuning to a
different channel by pressing P+/ P-.
Display Option Screen
Please note that if you do not want any interactive
applications to be run automatically, set the Application
AutoSTART option in the Display Options screen to
NO.
4610_A5_GB.qxp 15/04/2005 11:57 Page 11

English
6 Main Menu
Main Menu
Country
Change PIN Code
Factory Reset
1-Timer Manager
(refer to chapter 6.3)
6-Installation
(refer to chapter 6.7)
5-Your Preferences
(refer to chapter 6.6)
4-Data Channels
3-For Parents
(refer to chapter 6.4)
2-Channel Manager
(refer to chapter 6.2)
Language Options
Parental ControlDecoder Lock
Display Options
Modem Connection
Modem Settings
System Settings
TV Settings
Upgrade Settings
Signal MeterSettingsLocal Time Decoder StatusChannel Search
Software UpgradeFor ParentsRemote ControlUsing Your Decoder MHP Applications Reminders And Timers
Smart Card
Decoder Upgrade
Loader Information
System Information
7-Help
8-Pay Per View
12 MAIN MENU
4610_A5_GB.qxp 14/04/2005 15:48 Page 12

6.1 Menu navigation
Your receiver offers a menu system that allows you to set the way many of the features of your
receiver operate.
MENU
To access the Main Menu, press the MENU key.
VW, OK and number keys
The Main Menu consists of 7 submenus. To evoke one of the submenus, highlight its name using
the Wor Vkeys, and then press OK. You may also press the number key to directly access the
respective menu item.
CB and number keys
To set settings in any screen, use either the Cor Bkeys to select from predefined values, or
number keys to enter figures, dates, times, etc.
OK, BACK and EXIT
To quit a menu and save changes, press OK.
Alternatively, press BACK to go back one level in the menu system without saving changes. To
exit the menu system without saving changes, press MENU or EXIT.
6.2 Channel manager
Channel Manager is used to:
• set channel properties (lock, unlock, skip, and rename channels);
• edit channels lists (move channels).
Note:
The SSkkiippfeature is used to skip channels when zapping through channel lists.
The MMoovveefeature is used to move channels within a channel list.
The LLoocckkfeature is used to protect access to certain channels using a 4-digit PIN code.
The RReennaammeefeature is used to edit channel names.
Selecting the channels you want to list
- Select the Mode: TV or Radio.
- Set the Channel List setting: All channels, Free
channels, or scrambled.
- Select the Modify feature you want to use:
None/Skip/Move/Lock/Rename.
- Press OK to proceed.
Channel Manager
English
MAIN MENU 13
4610_A5_GB.qxp 14/04/2005 15:48 Page 13

English
Managing channels
- Scroll to the channel you want to
view/skip/move/lock/rename, and then press OK.
- To skip or lock the selected channel, press OK. A Lock
or Skip icon appears.
- To move the selected channel, move to the new
position, and then press OK to confirm.
- To rename the selected channel, select characters from
the keyboard. To select/deselect the keyboard, press
P+.
Locking a Channel
6.3 Timer manager
Timer Manager lists all the existing timers. From this
screen, you can set, modify, and delete timers.
To be able to record a digital programme using a
VCR or DVD recorder, you must set a timer on
your receiver and also enable recording on the
recorder.
Timer Manager
Setting a timer
- Press OK to add a timer.
- Set the timer settings:
•Mode: TV or Radio
•Channel List: All channels, Free channels, or
Scrambled
•Channel
•Date, Start time and End time
•Timer type: Recording or Viewing
•Frequency: Once, Daily, or Weekly
- Press OK to confirm.
Setting a Timer
Modifying a timer
- Highlight the timer to be modified from the timer list,
and then press B.
- Edit the timer settings, and then press OK.
Deleting Timers/Reminders
- Highlight the timer to be deleted from the timer list,
and then press C.
- Press OK to confirm deletion.
Please note that when you set a recording, it is
protected from being interrupted. To cancel the
recording, press EEXXIITT, and press OOKKto confirm
when prompted.
Modifying a Timer
14 MAIN MENU
4610_A5_GB.qxp 14/04/2005 15:48 Page 14

English
MAIN MENU 15
6.4 For Parents
For Parents is used to set PIN code protection on
some menus, locked channels, and programmes not
suitable for certain audiences.
6.4.1 Decoder Lock
This item is used to enable or disable the protection
features mentioned above (Yes = enabled).
For parents Submenu
6.4.2 Parental Control
This item is used to protect access to programmes
according to their maturity level. PIN code protection is
automatically enabled for programmes which maturity
level is higher than the parental level you set.
6.4.3 Change your PIN code
This item is used to change your personal 4-digit code,
called PIN code.
Receiver lock Initially, your PIN code is assigned the value 1234.
To change your PIN code:
- Enter the current value.
- Then enter the new value of your choice.
- Enter the new value again to confirm.
6.5 Data channels
Please note that only MHP applications can be run.
Parental Level
6.6 Your preferences
Your Preferences is used to set on-screen display and
language options of your choice.
Your Preferences Submenu
4610_A5_GB.qxp 14/04/2005 15:48 Page 15

English
6.6.1 Display options
This item is used to set on-screen display settings,
including the channel banner settings.
- Set Time and date/Channel Number to Yes to
include them in the channel banner.
- Set the channel banner display duration of your choice.
- Set Text in Banner to Bigger to increase the size of
the text in the channel banner.
- Set Volume bar/Radio Label to Yes to include them
in the on-screen display.
- Set Transparency to Yes for the on-screen display to
Display Option Screen appear transparent.
- Set Application Autostart to Yes to automatically
launch the available MHP applications (recommended
setting).
6.6.2 Language options
This item is used to define the on-screen display
language, audio languages, subtitle languages, and teletext
language of your choice.
Language Options Screen
6.7 Installation
Installation is used to configure your system, search for
channels, and manage your receiver status.
Note: when the decoder is locked, access to the Installation
menu is protected by PIN code.
6.7.1 Local Time
This item is used to set the Time Zone so that the Local
Time setting matches your actual local time.
Installation Submenu
6.7.2 Settings
Settings is used to match your receiver settings to your
TV and recorder as well as location.
Settings Submenu
16 MAIN MENU
4610_A5_GB.qxp 14/04/2005 15:48 Page 16

TV Settings:
refer to the table below to set TV Screen Format and
Display Format.
TV Settings Screen
System settings:
- Video standard:
PAL or SECAM, pre-configured according to the
selected country
- TV SCART Output, VCR SCART Output:
to get the best picture quality, set this option to RGB
- Dolby Digital:
set to Yes only if your audio receiver supports AC3
(Dolby Digital 5.1)
- Easy Recording/Recording Type/Device:
refer to chapter 6
System Settings Screen - Default Volume Level:
volume level at wake-up from standby
Modem Settings:
modem configuration is generally handled by the MHP applications.
Modem Connection:
follow the instructions displayed on-screen to check your modem connection.
Decoder Upgrade Settings:
set Auto Upgrade to Yes to automatically initiate the upgrade procedure when available.
Otherwise you will be prompted to initiate the procedure.
Note that your decoder must be in running mode in order to check for upgrade.
Country:
changing the country will initiate a channel search and you will lose your current channel list.
Aspect ratio
Displayformat
TV screen format = 4:3
broadcast format = 16:9
TV screen format = 16:9
broadcast format = 4:3
Letter-box full picture with black bars at
the top and bottom
full picture with black bars on
the left and right
Pan-Scan picture cut-off on the left and
right
picture cut-off at the top and
bottom
Full screen full picture squeezed to fit full picture squeezed to fit
English
MAIN MENU 17
4610_A5_GB.qxp 14/04/2005 15:48 Page 17

English
6.7.3 Signal meter
Signal Meter is used to display the strength and quality
of the signal broadcast at the specified frequency in order
to check your antenna connection and setup.
Signal Meter
6.7.4 Channel Search
Channel Search is used to either Search for New
Channels or Reinstall All Channels (your channel list
will be replaced by a new one).
Press OK to launch the channel search. You may
interrupt this procedure by pressing BACK.
Channel Searching
6.7.5 Decoder Status
Decoder Status provides information about the system,
loader, and smart card.
Besides, the Decoder Upgrade item is used to check
whether new software is available for your receiver. If
available, press OK to initiate the upgrade. Do not
interrupt this operation once started.
Decoder Status Submenu
6.7.6 Factory Reset
Set Restore Settings to Yes, and then press OK to
restore the factory settings of the receiver and restart the
first-time installation process. As a result, your channel list
will be replaced by a new one.
6.8 Help
Factory Reset This submenu is used to provide information on how to
use your receiver and set the various settings.
18 MAIN MENU
4610_A5_GB.qxp 14/04/2005 15:48 Page 18

7 Advanced Settings
7.1 Easy Recording
The Easy Recording feature allows you to perform recordings without the necessity to program
your video recorder (VCR or DVD recorder). When you set a recording reminder or timer from
the Channel Banner or Timer Manager, the VCR starts/ends recording at the correct time.
Please note, however, that you may only use the Easy Recording feature provided that your
recorder supports it.
• First of all, consult User Manual of your recorder equipment to check if it supports Easy
Recording. Please note that most Philips VCR/DVD recorders support one of the two Easy
Recording options: either Prepare Record (to be checked first) or Record Link.
• Also, both your TV and VCR shall be equipped with two SCART sockets.
If your equipment satisfies above two conditions, connect your receivers as shown in the
Connection diagram below.
Then, select the System Settings item from the Settings submenu, enable the Easy
Recording feature by setting its option to YES, and assign to the Recording Type an
appropriate value: either Prepare Record or Record Link. You might have to test both settings
to find out the one applicable for your recorder.
TV set
Video recorder
Terrestrial
receiver
English
ADVANCED SETTINGS 19
4610_A5_GB.qxp 14/04/2005 15:48 Page 19