Philips Pronto TSU9300 Safety guide

TSU9300
Starter's Guide
Using the Control Panel
EN

Getting to know your Pronto Control Panel
The TSU9300 Pronto is a touchscreen-based control panel to control all your audio/video and other
home equipment. It has been pre-programmed by your installer and contains a file, called a
configuration file, which holds all the codes, graphical buttons and navigation behaviour.
As the control panel is capable of wireless Wi- i control, your equipment can be stored out of sight.
The TSU9300 can also control specific audio servers (Escient, Imerge, MCE PC) and lighting control
systems (Lutron). It also gives feedback information on the screen, such as tracks and album art or
the status of your lights.
TSU9300 Starter's Guide
2
TSU9300 Starter's Guide
Contents
Getting to know your Pronto Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Taking a irst Look. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Charging the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Enjoying your Pronto Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Controlling your Home Theatre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Changing the Pronto Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintaining the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
I U Approbation/Safety Content TSU9300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
CC Compliancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Regulations according to R&TTE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
WEEE Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Battery Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

QVGA touchscreen
Firm keys
Hard keys
Rotary wheel
Cursor keys
USB connector
TSU9300 Starter's Guide
3
Power ada ter
Control Panel
Docking Station
Taking a First Look
Panel connector
Power switch
Backlight key
Page +/Page – keys

TSU9300 Starter's Guide
4
Charging the Control Panel
When the Battery level icon on your screen turns red, it is time to charge the Control Panel.
Depending on how your installer has configured the Control Panel, it can be operated for one or up
to several days.
Note The lifetime of the battery depends on the time-out settings and the settings of the wireless
network configured by your installer. If you notice that the battery is deteriorating, please
contact your installer.
When you place the Control Panel in the docking station, an LED
will light up, indicating that the Control Panel is being charged.
When the LED goes off, the Control Panel is fully charged.
This can take 3 to 4 hours.
When the battery is low and the Charging LED is not visible,
make sure that:
• the Control Panel is placed properly in the docking station.
• the power switch on the left side of the Control Panel is switched to "1".
• the docking station is plugged into the wall socket.
• the connector in the docking station is clean and free of obstructions.
Tip It is advisable to place the Control Panel in the docking station after use. Even when the screen of
the Control Panel turns black, the Control Panel is still using power.
Enjoying your Pronto Control Panel
Controlling your Home Theatre
Activating the screen of the Control Panel
• Tap the to chscreen with your finger.
-Or-
• Press the Backlight key.

TSU9300 Starter's Guide
5
Depending on the settings made in the Screen Settings page, the screen is also activated
when you:
•tilt the Control Panel sufficiently towards you.
-or-
• press one of the 5 firm keys below the screen or one of the hard keys.
Operating the Control Panel
Buttons on the
touchscreen
These buttons are
used to
• Start an activity in
the Home Theatre
• Control the
individual devices
in the Home
Theatre
Firm keys
The actions for the
firm keys are activity-
related and can differ
de ending on the
age visible on the
screen.
Battery level
Wi-Fi activity
Hard keys on the Control Panel
The hard keys on the Control Panel
have fixed functions in the different
activities of the Home Theatre.
Note The screens of your Control Panel are customised by your installer and may look different from
the one on the image above.
≥50°
Presence and/or
strength network
No IP address
No connection
Wireless
Communication
resent
No icon
Icon disabled in the
Settings or
No network: The Control
Panel is configured to
work with IR

TSU9300 Starter's Guide
6
Changing the Pronto Settings
Notes our installer might have blocked access to the Settings pages.
Normally, your installer has fully programmed your Control Panel and no changes are required.
To open the Settings pages:
• Press and hold the Settings icon for more than 3 seconds.
General
Tip Press and hold the "–" and "+" buttons to decrease or increase the settings more quickly.
On the Info Page you can find the version
and network information and memory status.
The General volume refers to all bee s you
hear when you o erate the Control Panel.
The Button volume s ecifically refers to the
default bee you hear when you ress a
button.
T rning the Control Panel On/Off
Tip Always switch off the Control Panel during transport to avoid activation of the touchscreen and the
battery draining.
o change the Volume settings
•Ta the "-" and "+" buttons to adjust the
volume settings.
Power switch
The ower switch on the
left side of the Control
Panel turns the Control
Panel on and off.
o access the other Settings pages:
•Ta the Page +/Page - key.
o change Date & ime settings
1Ta the Month, Day, Year, or Time button.
The button is highlighted.
2Ta the "-" and "+" buttons to adjust the
date or time.

TSU9300 Starter's Guide
7
Screen
Support
Maintaining the Control Panel
Take care not to damage the touchscreen
Do not drop the Control Panel or subject it to any strong impact.
Attention Never use a pen, pencil or other sharp object on the touchscreen. This is to avoid scratching
the touchscreen.
Protect the Control Panel rom temperature extremes
Keep the Control Panel away from heaters and other heat sources.
The Control Panel is not waterproo
The Control Panel should not be exposed to rain or moisture.
Do not store or use the Control Panel in any location that is extremely damp or wet.
If you spill water on the Control Panel, you need to turn it off by switching the Power switch to "0".
Place the Control Panel in a clean environment to dry.
o change the Activation settings:
•Ta the buttons to toggle between the
different Activation settings:
Pick up sensor: the Control Panel
switches on when it is tilted.
Firm keys: the Control Panel switches on
and/or sends out IR when a firm key is
ressed.
Cursor keys: the Control Panel switches
on and/or sends out IR when one of the
cursor keys is ressed.
o calibrate the touchscreen:
1Ta the Calibrate button.
2Follow the on screen instructions to ta
the 4 corners of the screen.
The touchscreen is calibrated.
o change the time-out and the Brightness
settings:
•Ta the "-" and "+" buttons to adjust the
settings.
o exit the Settings pages:
•Press the right firm key labelled Exit.
Note The screen is calibrated in the factory.
Do not use this function unless you
experience problems with the
touchscreen.

TSU9300 Starter's Guide
8
Cleaning the Control Panel
• Use a soft, damp cloth to clean the Control Panel.
• If the touchscreen is dirty, clean it with a soft cloth moistened with a diluted window-cleaning
solution.
• Do not use a corrosive detergent or an abrasive sponge.
• Avoid excessive use of water.
Troubleshooting
The buttons on the touchscreen o my Control Panel do not work properly
If you find that tapping a button activates one of the adjacent buttons, or when you have to tap next
to a button to activate it, it is advisable to recalibrate the touchscreen as described in "Changing
the Pronto Settings" on page 5.
Calibrating is a way of adjusting the touchscreen to re-obtain accuracy and reliability.
The Control Panel goes to stand-by mode automatically
This is the time-out feature of the Control Panel, used to save power. You can adjust the time that
the Control Panel stays active in the Settings-Screen page, as described in "Changing the Pronto
Settings" on page 5.
My AV-equipment does not respond to commands rom the Control Panel
• Check the status of the battery on the screen. If the Battery level icon is red, recharge the
Control Panel as described in "Charging the Control Panel" on page 3.
• When your Control Panel works in a Wi- i environment, bear in mind that it may take the
network a few seconds to wake-up and start transmitting codes.
• You may be out of reach of the Wi- i network. The Wi-Fi activity icon that normally indicates
the Wi- i strength changes into .
Please refer to the next paragraph.
The Wi-Fi activity icon shows no Wi-Fi strength
Note The Wi-Fi activity icon may not be visible on the screen, depending on the settings made by
your installer.
If the Control Panel shows one of the following icons:
My Control Panel runs out o power quickly
• When the Control Panel is working in a Wi- i environment, bear in mind that the Control Panel is
still using power even when its screen is black. It is advisable to place the Control Panel in the
docking station each after use.
• When the battery constantly runs out of power, it may be time to replace the battery. Contact
your installer for more information.
No connection
• The Wireless Access Point is powered down
• The Control Panel is out of range of the Wireless Access point
• There is an encryption problem
No IP address
• An IP problem occurred. If the problem occurs regularly, contact your installer
to change the settings.

TSU9300 Starter's Guide
9
Sa ety instructions
our device contains lithium polymer batteries. Do not open the battery compartment.
Batteries may only be replaced by the service centre or a trained installer, never by the end-user.
Specifications
Display 2.8" T T colour display with touchscreen
QVGA (320 x 240 pixels) resolution portrait LCD
65,536 colours
Infrared (IR) Operating distance = max. 36 ft (12 m)
Operating angle = 45° at max 15 ft (5 m)
Wireless System Wi- i based technology operating at 2.4 GHz
Memory 64 MB SDRAM
48 MB lash memory
Power Management Power-on by tilting, tapping the screen, pressing the back light button
or tapping the keys
Power off automatically by time-out
Battery status indication
Dimensions Control Panel: 8.5 x 2.4 x 0.9 inch (215 x 60 x 24 mm)
Docking Station: 8 x 3 x 1.1 inch (202 x 76 x 28 mm)
Operating Temperat re 41° – 113° (5° C - 45° C)
Storage temperat re -13° – 158° (-25° C - 70° C)
Battery Lithium polymer battery, 1700 mAh
Power Adapter 100 V-240 V AC/50-60 Hz Power adapter
(5 VDC/2 A output)
Accessories - Power adapter
- Docking station
- Starter Guide
IR code database information Designed with UEI Technology
Licensed under U.S. Patent 5,689,353
Portions © UEI 1999
Pronto Control Panel Starter Guide
© Copyright 2008 Royal Philips Electronics, Interleuvenlaan 74-76, 3001 Leuven (Belgium)
Remarks:
All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.
Royal Philips Electronics is not liable for omissions or for technical or editorial errors in this manual or for damages
directly or indirectly resulting from the use of the Pronto Control Panel.
The information in this Starter Guide may be subject to change without prior notice. All brand or product names are
trademarks or registered trademarks of their respective companies or organisations.

FCC Compliancy
This device complies with Part 15 of the CC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the CC rule.
These limits are designed to provide reasonable protection against harmful interference in residential
installations. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If the equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Re-position or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to a socket on a different circuit from the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION User changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Notice for Canada/Remarq e po r le Canada
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme Canadienne NMB-003.
Regulations According to R TTE
Declaration
Hereby, Philips Consumer Lifestyle, BL Home Control declares that the TSU9300 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC:
• Radio: ETSI EN 300 328
• EMC: ETSI EN 301 489-1, ETSI EN 301 489-17
• Safety: EN60950-1
Bulgarian С настоящето Philips Consumer Lifestyle, BL Home Control декларира, че TSU9300 е в съответствие
с основните изисквания и останалите приложими разпоредби на Директива 1999/5/E .
Cze h My, Philips Consumer Lifestyle, BL Home Control, prohlašujeme že výrobek TSU9300 splňuje základní
požadavky a ostatní příslušná ustanovení Směrnice 1999/5/E .
Danish Philips Consumer Lifestyle, BL Home Control, erklærer herved, at følgende udstyr TSU9300 overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Dut h Hierbij verklaart Philips Consumer Lifestyle, BL Home Control, dat deze TSU9300 in overeenstemming is met
de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Estonian Käesolevaga kinnitab Philips Consumer Lifestyle, BL Home Control, et seade TSU9300 on kooskõlas Euroopa
Liidu Direktiivi 1999/5/EÜ põhinõuete ja teiste oluliste sätetega.
Finnish Philips Consumer Lifestyle, BL Home Control, vakuuttaa täten että TSU9300 tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
IFU Approbation/Sa ety Content TSU9300
i