Philips Environ3 61205A User manual

Strand Lighting Inc.
6603 Darin Way, Cypress, CA 90630, USA
Tel: [phone] Fax: [phone]
Strand Lighting Europe Ltd.
Unit 2, Royce Road, Fleming Way, Crawley, West Sussex. United Kingdom
Tel: [phone] Fax: [phone]
Strand Lighting Asia
Room 6-10, 20/F Delta House 3 On Yiu Street, Shatin, N.T. Hong Kong
Tel: [phone] Fax: [phone]
www.strandlighting.com
The material in this manual is for information purposes only and is subject to change without notice.
Strand Lighting assumes no responsibility for any errors or omissions which may appear in this manual.
For comments and suggestions regarding corrections and/or updates to this manual, please contact your
nearest Strand Lighting office.
El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso.
Strand Lighting no asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier
comentario, sugerencia o corrección con respecto a este manual, favor de dirijirlo a la oficina de Strand
Lighting más cercana.
Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten.
Strand Lighting uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch
auftreten. Für Bemerkungen und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen
und/oder Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten
Strand Lighting-Niederlassung aufzunehmen.
Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis.
La compagnie Strand Lighting n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans
ce manuel. Pour tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce
manuel, veuillez s'll vous plait contacter le bureau de Strand Lighting le plus proche.
Information contained in this document may not be duplicated in full or in part by any person without
prior written approval of Strand Lighting Inc. Its sole purpose is to provide the user with conceptual
information on the equipment mentioned. The use of this document for all other purposes is specifically
prohibited. Certain features of the equipment described in this document may form the subject of patents
or patent applications.
Document Number: 2-450212-050
Version as of: March 23, 2009
Environ 3 Infrared Remote Transmitter Operation Guide
©2009 Philips Group. All rights reserved.

Environ 3 Infrared Remote Transmitter Operation Guide
1
PREFACE
About this Guide
This document provides operating instructions for the following Environ 3 products:
• 61205A Environ 3 Infrared Remote Transmitter
Additional Manuals
The complete library of Environ 3 Preset Dimming Product manuals may be downloaded at
www.strandlighting.com. These manuals include:
• Environ 3 Preset Dimming System (Complete Manual)
• Environ 3 Master Control Stations, Dimmers, Switches, Channel Remotes
• Environ 3 Fan Control
• Environ 3 Power Extender
• Environ 3 Infrared Transmitter
• Environ 3 IR Receivers
• Environ 3 Relay Module
• Environ 3 Vision.net To Environ 3 Digital Interface

Operation Guide Environ 3 Infrared Remote Transmitter
2
PRODUCT OVERVIEW
Infrared Remote Transmitter Overview
The Environ 3 Infrared Remote is used to remotely control Environ 3
Control Stations over an unobstructed range of approximately 75 feet.
5-Preset Environ 3 stations have an integrated infrared (IR) receiver
that allows them to receive IR commands from the Infrared Remote.
Environ 3 IR Receivers (available in wall or ceiling mount) may also
be connected to Master Control Stations with A/V inputs to provide
IR functionality. (Refer to the Environ 3 IR Receivers Manual.) Using
the IR Remote, presets can be selected, raised and lowered, and light-
ing may be turned On and Off. The IR Remote is capable of control-
ling up to four different Environ 3 Control Station groups (rooms).
Before Using the Infrared Remote Transmitter
Install two AAA batteries (included) before operation.
WARNING!
• Keep unit dry and free of debris.
• Laser radiation. Do not stare into beam!
A
CB
D
ON OFF
Rm1 Rm2
Rm3 Rm4

Environ 3 Infrared Remote Transmitter Operation Guide
3
OPERATION
Enabling Keypads to Receive IR Signals
A wall keypad must be enabled in order to receive the IR signal from the IR Remote. To
enable the keypad, do the following:
Step 1. At keypad, press and hold A and D buttons for 3
seconds. A, B, C, D and OFF keys will illuminate
with one of them blinking. Button A refers to the
keypad being configured as Room 1, B to Room 2,
C to Room 3, and D to Room 4. If OFF is blinking,
IR is disabled. (Refer to the drawing at right.) The
factory default is Room 1 (A).
Step 2. Press desired Room (A, B, C, or D) or OFF. This
will configure the keypad as that room or disable
IR input. The selection will blink.
Step 3. Press ON to Save and Exit.
Using the Infrared Remote Transmitter
The Environ 3 Infrared Remote can operate in all four Room modes. On the IR Remote, you
must first press a Room button to place it in that mode. For example, pressing the Rm2 button
sets the Remote in Room 2 mode. The IR Remote will then control any Master Station pro-
grammed to receive that specific room’s commands.
Figure 1: IR Remote Layout
A-D
(Room)
Buttons
A
CB
D
ON OFF
Rm1 Rm2
Rm3 Rm4
Presets
Raise/
On and Off
Rooms
Lower

Operation Guide Environ 3 Infrared Remote Transmitter
4
This system is based on line-of-sight operations, therefore, the receiver must be able to "see"
the transmitter. Any obstruction between the transmitter and receiver may adversely affect per-
formance of the unit.
A
CB
D
ON OFF
Rm1Rm
2
Rm3Rm4
Figure 2: IR Remote Line-of-Sight

Environ 3 Infrared Remote Transmitter Operation Guide
5
NOTES

Part No. 2-450212-050