Philips SRP5002 User manual

SRP 5002/10
EN Remote control 3
FR Télécommande 11
DE Fernbedienung 20
NL Afstandsbediening 29
DK Fjernbetjeningen 38
SV Fjärrkontrollen 46
NO Fjernkontrollen 54
SF Käukosäätimen 62
IT Telecomando 70
ES Mando a distancia 78
PR Telecomando 86
PL Pilota 94
egister your product
and get support at
www.philips.com/welcome
Universal remote control
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:33 Página1
Downloaded from www.vandenborre.be

2
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:33 Página2
Downloaded from www.vandenborre.be

Table of contents
1 Your Remote Control 3
2 Installing the Remote Control 3-5
2.1 Inserting the Batteries 3
2.2 Testing the Remote Control 4
2.3 Setting the Remote Control 4-5
3 Keys and Functions 6-7
4 Advanced Functionalities 7-8
5 Frequently Asked Questions 9-10
DVD setup by model 102
Information to the Consumer 104
1 Your remote control
Congratulations on your purchase and welcome to Philips.
To fully benefit from the support that Philips offers, register your product
at www.philips.com/welcome. For quick, clean and easy setup go to:
www.philips.com/urc
After installing your remote control it can operate the most important
functions of your Philips branded TV or DVD manufactured since 1985.
2 In talling the remote control
2.1 Inserting the batteries
Press the cover inwards and slide it in the direction of the arrow.
Place two AAA type batteries into the battery compartment, as
shown.
Replace the cover and click it firmly into place.
1
3
2
1
1
3Installing the remote control
ENGLISH
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:33 Página3
Downloaded from www.vandenborre.be

2.2 Testing the remote control
The SRP5002 is programmed to operate the most of the functions used
on Philips TV and DVD. Because the available functions are not the same
for all the Philips TV and DVD models, it is advisable to test whether
your device fully responds to the SRP5002.
Ex mple of TV:
Turn your TV on manually or use the original remote control.
Tune to channel 1.
Press the TV key to select TV.
• The key lights up.
• If the key does not light up, check whether the batteries are
properly inserted (see
‘ 2.1 Inserting the batteries’).
Check whether all the keys are working.
For an overview of the keys and their functions see
‘3. Keys and functions’.
• If the TV responds as it should to all of the key commands the RP5002
is ready for use.
Tip
If the TV does not respond at all or not to all of the key commands, follow
the instructions under ‘2.3 Setting the remote control’, or for online setup go
to: www.philips.com/urc.
2.3 Setting the remote control
This is only necessary if your device does not fully respond to all the
command keys of your remote control. If that is the case, the example
below instructs you how to look for a most suitable set up on the
remote control for your Philips branded TV or DVD.
Ex mple of TV:
Press the mode key of the device you wish to set up the remote for.
E.g. the TV key.
1
3
3
2
3
1
2
2
ENGLISH
4Installing the remote control
ENGLISH
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:33 Página4
Downloaded from www.vandenborre.be

5
ENGLISH
Installing the remote control
Press and hold the OK key and digit key 1 until the LEDs under the
TV Mode key flashes twice
• If the LED of the TV Mode key flashes twice just once for an extended
period, the code has not been entered properly. tart again by pressing
the OK key and the digit key.
Check if you can operate all the functions on your TV with the RP5002.
• If there are keys that do not respond properly go back to step 2 and
press OK key and digit key 2.You can repeat this operation until you find
the programming that better fits your Philips TV, combining the OK key
with any digit key from 1to 9.
• For DVD you can combine the OK key with digit keys from 1to 7
Tips for DVD set up:
If you own a Philips DVD rewritable without Hard Disk Drive, while
setting the remote control, on chapter ‘2.3 Setting the remote control’,
step 2, press OK key and digit key 3.
If you own a hard drive Philips DVD recorder, while setting the remote
control, on chapter ‘2.3 Setting the remote control’, step 2, press OK key
and digit key 4.
If you own a Philips Blu ay DVDplayer, while setting the remote control,
on chapter ‘2.3 Setting the remote control’, step 2, press OK key and
digit key 6.
You might also find your set up code for Philips DVD with Hard Drive
by model. On the chapter ‘DVD setup by model’ you can look for your
Philips DVD model and its set up code.
When setting up the remote for DVD, be sure to press the DVD mode
key before starting the set up from step 2.
2
3
4
4
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:33 Página5
Downloaded from www.vandenborre.be

3 Keys and functions
1TV/DVD Device mode selection keys:
•Select TV or DVD mode
•Blink when the remote is setup
•Light when a remote control is sent to the
selected device
2TV text Colour keys
(TV) text red
(DVD) Pressed with SHIFT key - record
(TV) text green
(DVD) Pressed with SHIFT key - repeat
(TV) text yellow
(DVD) Pressed with SHIFT key - repeat AB
(TV) text blue
(DVD) Pressed with SHIFT key - shuffle
3Wide screen (TV) Wide screen
(DVD) Back
Info Displays on screen channel information
Smart sound (TV) Smart sound
(DVD) audio
Smart picture (TV) Smart picture
(DVD) Surround
4 (TV) Option/text hold
(DVD) title/chapter
5 Cursor Keys Cursor up, down, left, right, in a menu
6 Menu
7 - VOL + Adjusts the TV Volume
8 Mutes the TV sound
9 numeric keys Direct choice of channels and other functions
10 Shift For extra functions.When pressed at the same
time as a second key will get another function.All
blue labelled keys can be used together with SHIFT.
•For a complete list of the possible combinations
for the SHIFT key, please check ‘4 Advanced
Functionalities
’
11 5•Rewind (DVD).
Active Control (TV)
9•Stop (DVD).
Sleep (TV).
2•Play (DVD).
Clock (TV).
6•Fast forward (DVD).
Previous (TV).
5+9•Install
2+6/Memory out •For leaving the teletext menu or the instalation
menu on older Philips TVs
ENGLISH
Keys and functions
ENGLISH
6
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:33 Página6
Downloaded from www.vandenborre.be

12 (TV/DVD) Selects external:Audio/Video inputs
connected to your equipment (A/V function).
(DVD) pause
13 PROG + / KJ •Selects a previous or following channel
(TV and DVD´s with recording funcionality).
•Selects a previous or following track (DVD).
14 (TV) Text;Text Cancel (pressed with SHIFT key)
(DVD) timer/show view
15 OK/Enter Confirms your selection
16 (TV) Guide
(DVD) Disc menu
17 Ambilight (TV) Smiley / Ambilight On/Off;
Conceal / Ambilight Brightness Up (pressed
with SHIFT key)
(DVD) Angle
(TV) Frownie / Ambilight Mode/ Enlarge /
Ambilight Brightness Down (pressed with
SHIFT key)
(DVD) Subtitle
18 yStandby Switches TV or DVD off.
Note
If the device does not respond at all, or not to all of the key commands,
follow the instructions under ‘2.3 Setting the remote control
’ .
4 Advanced Functionalities
Restoring the origin l functions of your remote control
Press and hold the OK key and digit key 0 until the LEDs under the
Mode keys flash twice.
• If the LEDs of the mode keys flash just once for an extended period, the
code has not been entered properly. tart again by pressing the OK key
and the digit key 0.
SHIFT key fe tures
• Most of the remote keys, when pressed together with the shift key, will get
another function.
• The table below gives you an overview of the functions available, for the
shift key feature.
5
5
1
7
ENGLISH
Advanced Functionalities
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:33 Página7
Downloaded from www.vandenborre.be

ENGLISH
8Advanced Functionalities
11
12
13
1144
1155
1166
1177
Digit 4
HD
PC
CC
Clock
- / --
Increment
Decrement
Text cancel
Enter
EPG record
Enlarge/Ambilight Brightness Up
Enlarge/Ambilight Brightness Down
PIP
Pixelplus
Rewind
Fast Forward
Pause
Next
Previous
Eject
Select
Timer / Guide
Live TV
HDD List
Digit 3
Digit 8
Digit 9
/ Active Control
Play / White
/ P<P
AV
Channel Up
Channel Down
4
3
TXT
OK
Guide
Smiley / Ambilight ON/OFF
Smiley / Ambilight Mode
2
2
33
44
55
66
77
88
99
Key
TV Text Green
Down
PIP/dual scr
PIP swap
PIP freeze
PIP shift
TV
Main Still
I-II
Surround
Brightness +
Brightness -
Color -
Color +
Search +
C/P
Radio
TV
DVD Shift function
Record
Repeat
Repeat AB
Shuffle
Setup
Options
Info
Zoom
Home
Cam
Edit
TV Text Red
TV Text Yellow
TV Text Blue
Aspect Ratio
Info
Smart Sound
Smart Picture
Option/TXT Hold
Up
4
3
Left
1
Right
2
Menu
Volume Up
Volume Down
4
3
Mute
Digit 1
Digit 2
TV Shift function
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:34 Página8
Downloaded from www.vandenborre.be

Frequently asked questions 9
ENGLISH
5 Frequently asked questions
In this chapter you find answers to the most frequently asked questions
about your remote control.
How can I get the standby key working on my Philips Ambilight
TV?
While setting the remote control, on chapter ‘2.3 Setting the remote
control’, step 2, press OK key and digit key 2.
How can I get the smart sound and smart picture keys working
for my TV?
While setting the remote control, on chapter ‘2.3 Setting the remote
control’, step 2, press OK key and digit key 4.
How can I get the play key working on my Philips Ambilight TV?
While setting the remote control, on chapter ‘2.3 Setting the remote
control’, step 2, press OK key and digit key 3.
How can I get the standby key working for my TV?
While setting the remote control, on chapter ‘2.3 Setting the remote
control’, step 2, press OK key and digit key 6.
How can I get the standby key working for my DVD?
While setting the remote control, on chapter ‘2.3 Setting the remote
control’, step 2, press OK key and digit key 2.
The device I w nt to oper te does not respond nd the mode
key (TV or DVD) does not fl sh when I press key.
Replace the old batteries with two new AAA batteries.
The device I w nt to oper te does not respond but the mode
key (TV or DVD) does fl sh when key is pressed.
Point the SRP5002 at the device and make sure that there are no
obstructions between the SRP5002 and the device.
The SRP5002 does not respond properly to comm nds.
Try programming the SRP5002 again.
If the device still does not respond, call our helpline.
The Text TV keys do not work.
• Find out whether your TV is equipped with Text TV.
• If it is equiped with Text TV, try a different setup for your remote (chapter 2.3).
• If none of the above options solved your problem, call our helpline for support.
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:34 Página9
Downloaded from www.vandenborre.be

6 Need help?
If you have any questions about the SRP5002, you can always contact us.
You will find our contact details after the code list at the back of this
manual.
Read this manual carefully before you make a call.
You can solve most of the problems yourself. If you cannot find any
answers to your problems, write down the details of your device in the
code list at the back of this manual.
This will help our operators to assist you better and more quickly. Look
up the numbers of the models in the instructions accompanying the
device or on the back of your device. When you call our helpline, make
sure the device is to hand so that our operators can help you determine
whether your remote control is working properly.
The model number of your Philips universal remote control is
SRP5002/10.
Date of purchase: ......../......../........
(day/month/year)
10 Need help?
ENGLISH
SRP5002_MA190508_v6.qxd:125254c4_SRU5110_86 19/05/08 18:34 Página10
Downloaded from www.vandenborre.be