Philips SRU8112/27 User manual

SRU 8112/27
Register your product
and get support at
www.philips.com/welcome
Universal remote control
EN Remote control

2
1
17
18
19
21
20
3
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
22
2

Table of contents
1 Your universal remote control 3
2 Installing the remote control 3-5
3 Using the remote control 5-8
3.1 Keys and functions 5-7
3.2 Selecting devices 7-8
4 Extra possibilities 8-18
4.1 Home menu 8-9
4.2 Devices 9-10
4.3 Favorite channels 10-12
4.4 Macros 12-14
4.5 Advanced options 14-15
4.6 Learning key functions 16-18
5 Frequently asked questions 18-20
6 Need help? 20
Limited warranty 21
1 Your universal remote control
Congratulations on your purchase and welcome to Philips.
To fully benefit from the support that Philips offers,
register your product at www:philips.com/welcome
For quick, clean and easy setup go to: www.philips.com/urc
After installing the universal remote control you can operate
a maximum of 12 different devices with it. During setup you
can define yourself exactly which devices can be operated
(see table under 2.‘Installing the remote control’).
2 Installing the remote control
Remove the protective foil from the display.
Press the tab of the battery compartment cover inwards
and lift off the cover.
2
1
3Installing the remote control
ENGLISH

Insert three 1.5 LR6 (AA) type alkaline batteries noting
the + and - configuration in the battery compartment.
Be sure to use fresh batteries.
Replace the cover and click firmly into place.
• The language selection screen appears.
Select your preferred language by pressing the
corresponding side key.
• The ‘Setup wizzard’ screen appears.
Press any key to continue.
Follow the on-screen instructions to set up the remote
control for all devices you wish to operate, using the
remote control.
• You can set up the remote control for any of the devices
listed below.
• To exit the ‘Setup wizard’ at any time, select ‘Quit’.
• After setting up the remote control to operate your devices,
the ‘Favorites’ set up screen appears.
For setting up favorite channels (‘favorites’),
refer to chapter 4.3 ‘Favorite channels’.
Notes
• To save battery life, the remote control automatically
turns off if any button (or button combination) is pressed
for 30 seconds or more.
• When the batteries are almost empty, the battery low
indication ( ) flashes on the display. Replace the
batteries and follow the local regulations for battery
disposal.
Device name Description
TV Traditional TV and flat screen TVs
DVD DVD player and recorder
Sat Satellite receiver
DVDR DVD player and recorder
Cable Cable set-top box
Amp Amplifier / tuner
VCR Video cassette player and recorder
DVBT Digital Video Broadcasting Terrestrial
device
STB Set-top box
7
6
EN
FR
ES
5
4
3
4Installing the remote control
ENGLISH

ENGLISH
5Using the remote control
CD CD player and recorder
LCD LCD TV
Plasma Plasma TV
Audio Amplifier / tuner
Tuner Amplifier / tuner
Tape Audio cassette tape player and recorder
MD Mini Disk player and recorder
PVR Personal Video Recorder (digital video
recorder)
DMR Digital Media Receiver
TV / VCR TV with integrated VCR
TV / DVD TV with integrated DVD
DVD / VCR DVD / VCR combination
DVDR / HDD DVD / Hard Disk Drive combination
PC Personal Computer
HTS Home Theatre System
Note
Settings made during this initial set up can be changed
afterwards. For this, refer to chapter 4 ‘Extra possibilities’.
3 Using the remote control
After installing the remote control you can operate the
devices the remote control is set up for. For operation the
appropriate keys on the remote control can be used as well
as the additional on-screen keys that are displayed when a
device is selected. For this, refer to chapter 3.2 ‘Selecting
devices’.
3.1 Keys and functions
The illustration on page 2 gives an overview of all keys and
their functions.
1yStandby switches the selected device on or off.
2 USER 1 / USER 2 display favorite channels for
‘User 1’ and ‘User 2’.
3 Side keys direct access device features.
4 Display shows the current remote control
status.
5 HOME enters / exits ‘Home’ mode and opens
the starting screen for most remote
control operations.
MODE displays list of devices that can be
selected.

FAVORITE displays list of users and items for
which favorite channels are set up
(‘User 1’, 2,‘Sports’,‘Movies’, etc. ).
6 T-CENTRAL TiVo key. Selects TiVo Central.
MENU turns the menu screen on the selected
device on and off.
7 Cursor keys cursor up, down, left, right in a menu.
The cursor left key jumps back one
level in the SRU 8112 menus.
OK confirms your selection.
8 INFO displays on-screen information.
9 - VOL + adjusts the volume of the selected
device.
s
mutes the sound of the selected device.
10 SAP selects Secondary Audio Program (if
available).
SUBTITLE selects DVD subtitles.
CC TV Closed Caption (if your TV has this
feature)
11 SCAN - / 5• rewind.
• goes through a program in reverse
direction.
PLAY / 2play.
SCAN + / 6• wind.
• fast forward through a program.
12 REC / 0record (press twice).
STOP / 9stop.
PAUSE / ;pause.
13 REPEAT Replays the last 8 seconds of a
program.
Thumbs down 4sets you TiVo Thumbs rating.
LIVE TV switches to Live TV broadcast.
INPUT • dispays the DVD player’s Setup menu.
• Selects between TV and VCR.
Thumbs up 3sets you TiVo Thumbs rating.
ADVANCE catches you up to the live broadcast.
14 Numeric keys direct choice of channels, text input
and other functions. Functions in red
are available in audio mode.
15 + 100 selects channel numbers, greater than
100.
(-) selects digital channels (e.g. 2-3).
16 IR transmitter sends IR commands to the selected
device.
17 ENTER used after direct channel selection
(with the numeric keys), to
immediately switch to the selected
channel.
Using the remote control
ENGLISH
6

7
ENGLISH
Using the remote control
18 ZOOM enlarges a specific area of the screen.
ARC Aspect Ratio Control. Selects viewing
format for the displayed picture. E.g.
Wide, Zoom, etc.
REPEAT A-B Repeat (RPT A.B).
Repeats playback of current Chapter
or Track in DVD mode.
LAST • returns to the previously selected
channel.
• repeats DVD.
19 - CHAPTER + selects previous / next track in CD
and DVD mode.
- CH + selects previous / next channel.
20 RETURN returns to previous on-screen
selection.
QUIT exits on-screen menu mode.
21 GUIDE displays Electronic Program Guide.
22 IR receiver receives IR signals in ‘Learning’ mode.
For this, refer to chapter 4.6 ‘Learning
key functions’.
3.2 Selecting devices
Press the MODE key.
• The ‘Mode’ screen appears.The devices that can be selected
are highlighted. Only devices for which the remote control is
set up can be selected. For this, refer to chapter 2.‘Installing
the remote control’.
Press the corresponding side key to select the desired
device.
• The selected device will be displayed at the bottom left of
the display. More functions for operating the device are
shown in the upper part of the display.
TV
Cable
DVR
Audio
HTS More
Sat
VCR
DVD
CD
Pick Device
2
1

You can now operate the selected device, using the
appropriate keys on the remote control. for this,
refer to chapter 3.1 ‘Keys and functions’.
• To use the additional functions, shown on the display,
press the corresponding side keys. Press ‘Next’ to scroll
through the list of functions.
• Each time a remote control command is sent,
this will be indicated at the bottom left of the display.
• To set up the remote control for other (more) devices
(adding devices), refer to chapter 4.2 ‘Devices’.
4 Extra possibilities
4.1 Home menu
Via the ‘Home’ menu you have access to the various extra
and advanced features of the SRU 8112.
Press the HOME key to enter the ‘Home’ menu.
• The ‘Home’ screen appears.The options below are available
in the ‘Home’ menu.
• Use the side keys to make selections in the ‘Home’ menu
and submenus.
• Use the cursor left key to go back a the previous level in
the menu.
QuickPower
Sleep
Macros
Setup
Help
Cable
1
3
8Extra possibilities
ENGLISH

9
ENGLISH
Extra possibilities
Quickpower
Switches the device you wish to operate on / off.
Only devices for which the remote control is set up can be
selected.
• Select ‘QuickPower’, then select the device to switch
on / off.
Sleep
Sets devices to switch off at a preset time.The switch-off time
can be set in intervals of 15 minutes. Maximum switch-off
time is 90 minutes.
Only devices for which the remote control is set up can be
selected.
• Select ‘Sleep’, then select the device(s) to set a switch-off
time for.
• Press the corresponding side key(s) to set the desired
switch-off time(s).
• Make sure the remote control points at the device(s) you
have set a switch-off time for.
Macros
Shows available macros, if macros have already been set up.
If no macros are available, you can set up macros here.
For this, refer to chapter 4.4 ‘Macros’.
Setup
Devices: allows you to add and delete devices. For this,
refer to chapter 4.2 ‘Devices’.
Favorites: allows you to add, edit, reorder, delete and / or
rename favorite channels. For this, refer to
chapter 4.3 ‘Favorite channels.
Macros: allows you to add, edit, delete, rename and / or
extend macros. For this, refer to chapter 4.4
‘Macros’.
Advanced: See 4.5 ‘Advanced options’.
Learn: See 4.6 ‘Learning key functions’.
Help
Gives you extra information on how to set up and use your
remote control.

10 Extra possibilities
ENGLISH
4.2 Devices
During installation you set up the remote control to operate
a number of devices.The ‘Setup’ submenu enables you to add
and delete devices at any time.
Adding devices
You can add a device more than once and save it under a
different name each time.
Press the HOME key and select ‘Setup’ in the ‘Home’
menu.
Select ‘Devices’.
• The available devices (already added) are highlighted on the
display.
Select the device you wish to set up the remote control
for (add) and follow the on-screen instructions.
Select ‘Save’, then ‘Save code’ when finished.
Repeat above steps for other devices you wish to set up
the remote control for (add).
• Select ‘Quit’ to exit the ‘Setup’ submenu at any time.
Deleting devices
Press the HOME key and select ‘Setup’ in the ‘Home’
menu.
Select ‘Advanced’.
Select ‘Clear Settings’.
Select ‘Devices’.
Select the device you wish to delete.
Select ‘Clear’.
Repeat step 4-6 for all devices you wish to delete.
• For selecting devices, refer to chapter 3.2 ‘Selecting
devices’.
4.3 Favorite channels
You can set favorite channels for various users (‘User 1’,‘User
2’,‘Kids’, etc.) and / or various items (‘Sports’,‘News’,‘Movies’,
etc.).
Adding / editing favorite channels
Press the HOME key and select ‘Setup’ in the ‘Home’
menu.
Select ‘Favorites’.
Select ‘Add/Edit’.
Select the user (‘User 1’,‘User 2’, etc.) or the item
(‘General’,‘Movies’, etc.) you wish to add favorite channels
to.
Press the OK key.
5
4
3
2
1
7
6
5
4
3
2
1
5
4
3
2
1