Philips HTR5204/12 User manual

Digital AV Receiver System
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
What’s in the box?
Need help?
User Manual
See the user manual that came with your Philips Digital AV Receiver System.
Online
Go to www.philips.com/support.
HTR5204
2007 © Koninklijke Philips N.V.
All rights reserved.
sgpJOL707/12-eng
STANDBY-ON SURROUND SOUND TREBLE BASS PROGRAM TUNING SOURCE
PHONES MP3 LINE-IN
VOL
Main Unit Remote Control
and 2 batteries
User
Manual
1 centre, 2 front, 2 rear speakers
and subwoofer
FM wire antenna AM/MW
loop antenna
MP3 Line-In cable for
portable audio player
Audio cable
Coaxial cable
2Set up
Adjusting the speakers
APress STANDBY-ON on the main unit to turn it
on.
BPress SURROUND on the remote control.
CPress and hold PROGRAM on the front panel to
access the system setup menu.
To adjust the audio delay for the centre
speaker only:
lPress .or >to until ‘CENTER DELAY’
appears.
lRotate the VOL control to change the delay time.
To adjust the audio delay for the rear
speaker only:
lPress .or >to until ‘REAR DELAY’ appears.
lRotate the VOL control to change the delay time.
DToconfirm all settings, press PROGRAM.
3Enjoy
Start Playback
APress STANDBY-ON on the main unit to turn it
on.
Note Ensure all the audio/video devices are connected
before you start playback.
BTurn on the connected audio/video device.
CPress PLAY on the connected audio/video device.
DPress DISC/DI, RADIO, TV or AUX to select
the preferred audio input source.
Playback from portable audio
player
Listen to audio from your portable audio player by
connecting the device to your main unit.
AConnect the supplied MP3 Line-In cable from the
MP3 LINE-IN socket on the main unit to the
headphone output socket on your portable audio
player.
BPress PLAY on your portable audio player.
CPress MP3 LINE-IN to listen to the playback.
See the accompanying user manual for other
options to ne-tune your speaker settings.
See the accompanying user manual for radio
tuning and other playback settings.
Power cable

1Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
B
C
D
D
C
APlace the centre speaker above or close to the TV.
BPlace the subwoofer on the floor, at least one meter
away from the TV.
CPlace the front speakers at equal distances from the
TV.
DPlace the rear speakers at normal listening ear level.
B
Connect the speakers and
subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
C
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
12 mm
B
C
A
AConnect the FM antenna to the FM 75 Ùsocket.
Extend the wire and fix its end to the wall.
BUnfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into
the AM/MW sockets.
D
Connect the audio from TV
(optional)
Connect the red and white audio cable from the AUDIO
IN - TV sockets on the main unit to the AUDIO OUT
sockets on your TV.
AUDIO
OUT
AUDIOIN
AUDIO
OUT
AUDIO OUT
Note Press TV on the remote control to get the sound
output from the speakers system when watching the TV
program.
E
Connect the audio from audio/video
devices (DVD Player, Recorder or Cable/Satellite
Receiver)
Option 1: Using the analogue audio sockets
Connect the red and white audio cable from the AUDIO
IN - AUX sockets on the main unit to the AUDIO OUT
sockets on the other device.
Note Start playback on the device. Press AUX on the
remote control to hear the sound output from the
speakers.
Option 2: Using the 6 Channel In sockets
Connect the audio cables (not supplied) from the 6
CHANNEL IN sockets on the main unit to the six
channel AUDIO OUT sockets on the other device.
TOTV - I/OEXT1
AUX- I/OEXT2
SCART IN
Note Start playback on the device. Press DISC/DI on
the remote control repeatedly until ‘DISC 6CH’ appears.
Option 3: Using the Coaxial In socket
Connect a coaxial cable from the COAXIAL socket on
the main unit to the COAXIAL OUT sockets on the
other device.
TO TV - I/O
EXT1
AUX- I/OEXT2
SCART IN
Note Start playback on the device. Press DISC/DI on
the remote control repeatedly until ‘COAX IN’ appears.
Option 4: Using the Optical In socket
Connect an optical cable (not supplied) from the
OPTICAL sockets on the main unit to the OPTICAL
OUT sockets on the other device.
TO TV - I/O
EXT1
AUX- I/OEXT2
SCART IN
Note Start playback on the device. Press DISC/DI
on the remote control repeatedly until ‘OPTI IN’
appears.
Main Unit (rear)
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
Audio/Video device (rear)
Television (rear)
Audio/ Video device (rear)
Main Unit
(rear)
Television (rear)
Main
Unit
(rear)
FM antenna
AM/MW
antenna
Main Unit
(rear)
Audio/ Video device (rear)
Television (rear)
Television (rear)
Audio/ Video device (rear)
Main Unit (rear)
Main Unit
(rear) Main Unit
(rear)