Philips FWD832/98 User manual

FWD832
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
1
Quick Start Guide
User Manual
Quick Start Guide
Composite Video Cable
ELTITBUSOIDUA
OK
SYSTEM MENU
MODE REPEAT A-B SLEEP
TIMER OSD
DISPLAY
MUTEAUX
DISC MENU
DISC TUNERTUNER
Remote control
T-type FM antenna
MW antenna Component video cables
Audio cables
Pull out the plastic
protective sheet
before use.
FWD832 QUG_Eng 2006.8.25, 9:571

Tips
–See the User Manual for other TV
connection options.
–For better FM reception, please
make sure that the two prongs of the
T-type antenna are in alignment with
each other.
Setting up the TV
1
2
4
3
Connect the speaker cables.
Connect the MW and T-type FM antennas.
Connect the component video cables (red/blue/green) and audio cables
(white/red) a TV.
Connect the power cords of the system and TV.
1
2
Press SOURCE (DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
1
4
7
2
5
8
0
3
6
9
ANGLE
PROG
GOTO
ELTITBUSOIDUA
ZOOM
VOL
+
ECHO
KEY
SOUND
DBB
IS
OK
SYSTEM MENU
MODE REPEAT A-B SLEEP
TIMER OSD
DISPLAY
MUTEAUX
DISC MENU
DISC TUNERTUNER
DISC
AUDIO
IN
S-VIDEO
IN
VIDEO IN
AUDIO
IN
S-VIDEO
IN
VIDEOIN
TVIN
Cr
Cb
Y
Speaker
(right)
Speaker
(left)
T-type FM antenna
MW
antenna
AC
p
ower cord
FWD832 QUG_Eng 2006.8.25, 9:572

Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK SET on the system.
When the hour digits flash, press SEARCH 22/33 (í/ëon the remote) to set the
hours.
Press CLOCK SET again and the minute digits flash.Then press SEARCH 22/33 (í/
ëon the remote) to set the minutes.
Press CLOCK SET again to confirm the time setting.
Setting system menu options
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
1
4
7
2
5
8
0
3
6
9
ANGLE
PROG
GOTO
ELTITBUSOIDUA
ZOOM
VOL
+
ECHO
KEY
SOUND
DBB
IS
OK
SYSTEM MENU
MODE REPEAT A-B SLEEP
TIMER OSD
DISPLAY
MUTEAUX
DISC MENU
DISC TUNERTUNER
SYSTEM MENU
ITALIAN
FWD832 QUG_Eng 2006.8.25, 9:573

Playing a disc
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote) to select tuner source.
Press PROGRAM for more than three seconds to program all available stations in order
of waveband.
Press PRESETí/ëuntil the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
2005 CKoninklijie Philips Electronics N.V.
All rights reserved.
http://www.philips.com
1
2
3
Press OPEN•CLOSE çto open the disc tray and load in a disc, then press the same
button again to close the disc tray.
➜Make sure the label side of the disc is facing up.
Playback will start automatically. If not press PLAY/PAUSEÉÅ.
To stop playback, press STOP 9.
PDCC-JS/JW-0634
FWD832 QUG_Eng 2006.8.25, 9:574