Philips PCUH411R User manual

USB Hub
Product description
> Connect up to 127 USB devices simultaneously
> Hot plug-and-play
> Transmission bandwidth from 1.5 Mbps to 12 Mbps
> 1 Upstream port and 4 Downstream ports
> Self-powered or Bus-powered operation
> Over-current Protection
> Fulfills USB-IF specification Rev.1.1
> Stands alone or clips on monitor* base
Clips on monitor base
* compatible with 2000 / 2001 Philips
CRT monitor range
PCUH411
PCUH411
Removable cover

All trademark acknowledged.
Copyright ©2000 Philips Electronics N.V.
Technical Specifications
Power Supply
• Input: 100 ~ 240V, 1.0A max.
50 ~ 60 Hz,28 ~ 40VA
• Output: +5V, 2.6A
LED indicators
• Green / On = Link /Active port
• Green / Off = Over-current or alert
Regulatory approvals (version dependent)
•CE
• FCC
•UL
• CSA
• C-Tick
• T-mark
Environment
• Operation temperature 0°C to 70°C
• Humidity 0% ~ 80% RH non-condensing
• Weight 150g
• Dim.with cover (WxHxD) 136 mm x 25 mm x 72 mm
• Dim.with cover (WxHxD) 5.3" x 1.0" x 2.8"
• Dim.without cover (WxHxD) 136 mm x 25 mm x 55 mm
• Dim.without cover (WxHxD) 5.3" x 1.0" x 2.1"
All data subject to change without notice
Released date: June 2000
www.philips.com
Device support
• All USB products
• Up to 127 devices simultaneously
Standards
• USB-IF specification Rev. 1.1
Bandwidth
• 1.5 Mbps for unshielded cable
• 12 Mbps for shielded cable
Ports
• 4 downstream ports
• 1 upstream port
Over-Current Protection
• On each downstream port
Power Source
• Self-powered via power supply
• Bus-powered from PC
Power Consumption
• Operating current 65 mA
USB Hub PCUH411
PCUH411