Philips SWS3435H/37 User manual

Register your product and get support at
www.philips.com/welcome
EN User manual
SWS3435S/27
SWS3435H/37

3
English
EN
Contents
1 Important 4
Safety 4
2 Your SWS3435 6
Overview 6
3 Installation 7
Connect the HDMI switcher to your
HD devices and video sources 7
4 Activate the SWS3435 function 8
For CEC compliant HDTV and video
sources 8
For non-CEC compliant HDTV and/or
video sources 8
5 Technical data 9
6 Troubleshooting 9
7 Warranty and services 10
8 Glossary 10
Contents

4EN
1 Important
Safety
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation mark’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems. For the
safety of everyone in your household, please
do not remove product covering.
Warning
To reduce the risk of re or electric shock, this •
apparatus should not be exposed to rain or
moisture and objects lled with liquids, such as
vases, should not be placed on this apparatus.
Caution
To prevent electric shock, fully insert the plug.•
(For regions with polarized plugs: To prevent
electric shock, match wide blade to wide slot.)
Important Safety Instructions
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
hDo not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including ampliers) that
produce heat.
iDo not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not t into
your outlet, consult an electrician for
replacement of the obsolete outlet.
jProtect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
kOnly use attachments/accessories
specied by the manufacturer.
lUse only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.

5
English
EN
mUnplug this apparatus during lightning
storms or when unused for long periods
of time.
n Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
oApparatus shall not be exposed to
dripping or splashing.
pDo not place any sources of danger on
the apparatus (e.g. liquid lled objects,
lighted candles).
Interference information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions :
1This device may not cause harmful
interference; and
2This device must accept any interference
received, including interference that may
cause undesired operation.
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers, which, like any
electronic apparatus, in general have the
ability to emit and receive electromagnetic
signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips conrms that if its products are
handled properly for their intended use, they
are safe to use according to scientic evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
Notice for USA
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Relocate the receiving antenna.•
Increase the separation between•
equipment and receiver.
Connect the equipment into an outlet on •
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced•
radio/TV technician for help.
Notice for Canada
Class B Clause
This digital apparatus does not exceed the
Class B limits for radio noise emissions from
digital apparatus as set out in the Radio

6EN
Interference Regulations of the Canadian
Department of Communications.
This Class B digital apparatus complies with
Canadian ICES-003.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
The packaging of this product is intended to
be recycled. Contact your local authorities
for information about how to recycle the
packaging.
When this logo is attached to a product,
it means a nancial contribution has been
paid to the associated national recovery and
recycling system.
HDMI, and HDMI logo and High-Denition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
2 Your SWS3435
Congratulations on your purchase and welcome
to Philips!
To fully benet from the support that Philips
offers, register your product at www.philips.
com/welcome.
Overview
Front view
1Input jack 4
2Source indicators
3Power indicator
4CEC indicator
Top view
1POWER/SELECT button

7
English
EN
Rear view
1DC input jack
2Output jack
3Input jacks 1/2/3
The SWS3435 is a 4-in-1 HDMI switcher which
offers a single cable connection to your HDTV.
You can connect up to four video sources
to the HDMI switcher at the same time.
The HDMI switcher is compliant with your
CEC-enabled video sources, such as the DVD
recorder, satellite, blue-ray player and game
console.
CEC (Consumer Electronics Control) is part
of the HDMI standard. If CEC is available in the
source and HDTV devices in your home setup,
the devices are able to pass commands through
the HDMI connection.
3 Installation
Connect the HDMI switcher
to your HD devices and
video sources
You can connect four video sources to the
HDMI switcher at the same time, but you can
only select one source each time.
1Connect the HDMI cables of the video
sources to the input jacks (1/2/3/4) of the
HDMI switcher.
2Connect the HDMI cable of your HDTV
to the output jack of the HDMI switcher.
3Connect one end of the power adapter
to the DC input jack of the HDMI
switcher and the other end to a power
socket. When there is a good power
supply, the indicators are always on.
The power LED indicator lights up in»
red.
The input 1 indicator lights up in green.»
The CEC indicator lights up in blue.»
Tip
You can also refer to the plug-and-play•
diagram at the back of the package.

8EN
4 Activate the
SWS3435
function
1Turn on the HDTV, video sources and
HDMI switcher.
2Press POWER/SELECT to select the
video sources one by one. Ensure all
video sources work properly.
Note
Repeat the above procedure if the power•
supply is interrupted.
For CEC compliant HDTV
and video sources
Ensure your HDTV and video sources are•
in standby mode.
Ensure the CEC function of your HDTV•
and video sources are activated.
Tip
For more information, see the user manuals of•
your HDTV and video sources.
• One touch play function:
Switch on your video source.
The HDMI switcher is on and switches»
to the correct input source.
The HDTV is on and switches to the»
corresponding input source.
• Automatic switching:
Switch on a video source.
The HDMI switcher switches to»
the corresponding input source
automatically.
Depending on different video sources,»
the previous selected source device
changes to / /standby mode.
• Standby mode:
Switch off the HDTV.
The HDMI switcher and all video»
sources go into standby mode.
For non-CEC compliant
HDTV and/or video sources
The one touch play feature, automatic switching
and standby mode are inactivated because of
the following reasons:
If the HDTV is not CEC compliant while•
the video sources are CEC compliant,
the HDTV does not respond to the CEC
commands sent by the video sources.
If the HDTV is CEC compliant while•
all the video sources are non-CEC
complaint, the video sources do not
respond to the CEC commands sent by
the HDTV.
If the HDTV is CEC compliant while•
not all of the video sources are CEC
compliant, the non-compliant video
sources do not respond to the CEC
commands sent by the HDTV.
Manual operation
You can manipulate the HDMI switcher
manually if the HDTV and/or video sources
are non-CEC compliant:
To switch off the HDMI switcher, press•
and hold POWER/SELECT.
To switch on the HDMI switcher, press•
POWER/SELECT again.
To switch between different input•
sources, press POWER/SELECT on the
HDMI switcher.
The LED indicator corresponding to»
the channel lights up.

9
English
EN
5 Technical data
Product specication
Compliant with HDMI CEC•
Support 1080p/12-bit deep color HDTV•
Support pixel clock rate up to 225 MHz•
Power adapter
Sunfone Electronics Company ACB006A-•
05UR Input: 100-240 Vac, 50-60Hz 0.2A;
Output: 5Vdc, 1A.
Power consumption
Power consumption at standby mode:•
<0.15W
6 Troubleshooting
There is no video displayed on my TV screen.
Ensure there is a direct connection•
between the HDTV and the video
sources.
Ensure the proper cables are connected•
between the HDMI switcher and the
video sources.
Ensure the HDMI switcher is powered•
up.
Ensure the HDMI cables are in good•
condition.
I cannot hear any sound or the sound is poor,
what do I do?
Ensure the HDTV volume control is•
adjusted correctly.
Ensure the HDTV volume is not set to•
minimum or the sound is not muted.
Ensure the HDMI cables are connected•
properly.
Ensure the HDMI cables are in good•
condition.
IF there is intermittent video problem or the
picture quality is poor, what do I do?
Ensure the video resolution of your•
HDTV and video sources can support
1080p.
Ensure the HDMI cables can transmit•
1080p video signal.
When I press on the HD device, the HDTV
does not switch the input channels.
Check if your HDTV and video sources•
are CEC compliant. Alternatively, you can
connect the HDTV and video sources
with an HDMI cable instead of SWS3435
to see if it works ne.

10 EN
7 Warranty and
services
Limited One-Year Warranty: Philips warrants
that this product shall be free from defects
in material, workmanship and assembly,
under normal use, in accordance with the
specications and warnings, for one year from
the date of your purchase of this product.This
warranty extends only to the original purchaser
of the product, and is not transferable.To
exercise your rights under this warranty, you
must provide proof of purchase in the form of
an original sales receipt that shows the product
name and the date of purchase. For customer
support or to obtain warranty service, please
call 919-573-7863.THERE ARE NO OTHER
EXPRESS OR IMPLIED WARRANTIES. Philips’
liability is limited to repair or, at its sole option,
replacement of the product. Incidental, special
and consequential damages are disclaimed
where permitted by law.This warranty gives
you specic legal rights. You may also have other
rights that vary from state to state.
Warranty information can also be found at:
www.philips.com/welcome
For technical support, send us an email
with the model number of the product
and a detailed description of your problem
to:accessorysuppor[email protected]
8 Glossary
C
CEC (Consumer Electronics Control)
CEC is part of the HDMI standard. If CEC
is available in the source and HDTV devices
in your home setup, the devices will be
able to pass commands through the HDMI
connection. Examples of CEC behavior are:
1. Being able to command your source using
the remote of your TV, 2. One-Touch-Play:
by pressing the PLAY button on your source,
your TV will automatically switch to the
corresponding input channel of that source.
H
HDMI (High-Denition Multimedia Interface)
It is a high-speed digital interface that can
transmit uncompressed high denition video
and digital multichannel audio. It delivers high
quality picture and sound quality, completely
free from noise. HDMI is fully backward-
compatible with DVI.
As required by the HDMI standard,
connecting to HDMI or DVI products without
HDCP (High-bandwidth Digital Content
Protection) will result in no Video or Audio
output.
HDTV (High-Denition Television)
It is a digital television broadcasting system
with higher resolution than traditional
television systems (standard-denition TV,
or SDTV). HDTV is digitally broadcast;
the earliest implementations used analog
broadcasting, but today digital television
(DTV) signals are used, requiring less
bandwidth due to digital video compression.