Philips SLV3220/05 User manual

Quick start guide
1Connect transmitter
3Enjoy
2Connect receiver
Welcome
Wireless TV link SLV3220
EN
EN

A. Transmitter B. Receiver
F. Remote control
blaster cord
C. SCART/RCA
cable
D. Power adapter
(2x)
SLV3220
EN
EN
User Manual 3
NL
NL
Handleiding 19
FR Mode d’employ
EN
EN
User Manual
NL
NL
Handleiding
FR Mode d’employ
G. User manual
AC
PAY TV
DVDDVD+RW
VCR
AC
SAT
or or or or
Television 1and 2 Power outlet
(2x)
Video cassette
recorder
DVD recorder DVD player Satelite
receiver
Set-top
box
What else you’ll need 1
2
1or 2 video sources
E. Quick start
guide
Quick start guide
1Connect transmitter
3Enjoy
2Connect receiver
Wireless TV link SLV3100
Welcome
SLV3220 WIRELESS TVLINK TRANSMITTER SLV3220 WIRELESS TVLINK RECEIVER
What’s in the box
Wireless TV link SLV3220
EN
EN
User Manual 3
NL
NL
Handleiding 14
FR
FR
Mode d’employ
EN
EN
User Manual
NL
NL
Handleiding
FR
FR
Mode d’employ
25
36
47
58

1Connect transmitter
Connect the SAT,VCR or DVD recorder
3
TV1
2
1
4
SAT/VCR
DVD recorder
2
TV1
1
3
5 4
STB/DVD
TV1
12
SAT
VCR
STB
DVD
A
Connect your other video source
B
Connect TV1
C
1. Take the supplied transmitter (A).
2. Find the SCART cable from the video source
that is connected to TV1:
• Either: Satellite receiver
• Or:VCR
• Or: DVD recorder
3. Unplug the SCART cable from the video
source.
4. Plug the SCART cable of the transmitter
into the SCART port of the video source.
1. Plug the SCART cable from TV1 into the
SCART connector of the transmitter on
video source 1.
2. Plug the SCART cable from TV1 into the
SCART connector of the transmitter on
video source 2.
1. Find the SCART cable from the video source
that is connected to TV1:
• Either: Set top box
• Or: DVD player
2. Unplug the SCART cable from the video
source.
3. Take the supplied SCART/RCA cable (C).
4. Plug the RCA connectors into the
corresponding ports on the transmitter (A).
5. Plug the SCART connector of the
SCART/RCA cable (C) into the SCART port
of the video source.

Connect the power adapter
D
1. Take the supplied power adapter (D).
2. Plug the connector into the DC 9V power
connector on the transmitter(A).
3. Plug the adapter into the power outlet.
> The power light on the front comes on as red.
Preparation
A
1. Switch on the transmitter (A).
2. Switch on the video source.
3. Take these items:
• Receiver (B)
• Power adapter (D)
• Remote control of a video source.
• This quick start guide (E)
4. Go to TV2.
2Connect receiver
AC
3
2
1
1
Check the operation of TV1
E
1. Switch on TV1.
2. Switch on the connected video source.
3. Select the correct SCART input on TV1.
4. Check if TV1 shows the image of the video source.
> The transmitter is connected correctly.
Firmly insert the SCART connectors to the ports:
1. Plug the connector straight into the port.
2. Apply some force when you insert the connector.

Connect TV2
AC
3
2
1
1
TV2
1
4 5
SLV3220 WIRELESS TVLINK RECEIVER
2
TV2
B
Connect the power adapter
C
Check the operation of TV2
D
1. Plug the SCART cable of the receiver into
the SCART port of TV2.
1. Switch on TV2.
2. Switch on the receiver (B).
3. Select the correct SCART input on TV2.
4. Point the remote control of the video
source to the receiver (B).
5. Operate the video source with its remote
control.
6. Check if TV2 shows the image of the video
source.
> The receiver is connected correctly.
1. Take the supplied power adapter (D).
2. Plug the connector into the DC 9V power
connector on the receiver (B).
3. Plug the adapter into the poweroutlet.
> The power light on the front comes on as red.

Result
3Enjoy
Example:View satellite programs on TV2
1
TV1
SLV3220 WIRELESS TVLINK RECEIVER
WIRELESS
SLV3220 WIRELESS TVLINK TRANSMITTER
WIRELESS
65 7
SOURCE
32
TV2
TV1TV2
SAT/VCR
DVD recorder
STB
DVD player
SLV3220 WIRELESS TVLINK TRANSMITTER
SOURCE21
SLV3220 WIRELESS TVLINK RECEIVER
A
1. Switch on the transmitter (A).
2. Switch on TV2.
3. Switch on the receiver (B).
4. Select the correct SCART input on TV2.
5. Point the remote control of the satellite
receiver to the receiver (B).
6. Switch on the satellite receiver.
7. Operate the satellite receiver with its
remote control. Enjoy!
To view other video sources, replace ´Satellite
receiver´ with the name of the device used.
Your satellite receiver needs to be connected
to the transmitter (A) of the wireless TV link.
View video source on TV1
B
1. Switch on TV1.
2. Select the correct SCART input on TV1.
3. Operate the video source as usual. Enjoy!

Troubleshooting
Problem Tip
No image or wrong image on TV1 • Make sure video sources are connected to the transmitter (A).
• Make sure the transmitter (A) is connected to TV1.
• Make sure SCART cables are firmly inserted.
• Make sure the video source is switched on.
• Make sure the correct SCART input on TV1 is selected.
No image or wrong image on TV2 • Make sure SCART cables are firmly inserted.
• Make sure the receiver (B) is connected to TV2.
• Make sure both receiver (B) and transmitter (A) are switched on.
• Make sure the video source is switched on.
• Make sure the correct SCART input on TV2 is selected.
• Select the correct video source with SOURCE on the transmitter (A).
> See the user manual (G) page 8.
• If the video source gives proper image on TV1:
Make sure the video source gives video signal in CVBS mode.
> See its user manual
• Change the wireless channel that is used for communication.
> See the user manual (G) page 7.
• The receiver (B) is out of range of the transmitter (A).
The number of walls and ceilings in between the receiver (B) and
transmitter (A) restrict the distance.
Interference in the image on TV2 • Slightly change the position of the receiver (B) or the transmitter (A).
• Change the wireless channel that is used for communication.
> See the user manual (G) page 7.
• The receiver (B) is out of range of the transmitter (A).
The number of walls and ceilings in between the receiver (B) and
transmitter (A) restrict the distance.
The video sources do not respond • Point the remote control directly to the receiver (B).
to the remote control commands • Replace the batteries of the remote controls with new ones.
from TV2 • Install the remote control blaster cord (F).
> See the user manual (G) page 6.
• The maximum operating distance of the remote control is 5 m.
The image of the video source • Turn off the auto standby mode of the video source.
disappears on TV2 > See its user manual.
• Follow the instructions to reconnect the video sources.
> See this quick start guide (E).

Helpline
België/Belgique/Belgien 070 222 303 (€0.17)
Danmark 3525 8759
Deutschland 0900 1101211 (€0.12)
España 902 888 784 (€0.15)
France 08 9165 0005 (€0.23)
0 0800 3122 1280
Ireland 01 764 0292
Italia 899 23 45 06 (€0.25)
Luxemburg/Luxembourg 40 6661 6544
Nederland 0900 8407 (€0.20)
Norge 2270 8111
Österreich 0900 060 827 (€0.20)
Portugal 2 1359 1442
Schweiz/Suisse/Svizzera 0900 001 600
Suomi 0600 412 001
Sverige 08 5792 9100
UK (United Kingdom) 0906 1010 016 (£ 0.15)
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2005 © Koninklijke Philips Electronics N.V.All rights reserved.
www.philips.com
QSG-SLV3220-AEN-V1.0
Need help?
User manual
See the user manual that came with your wireless TV link.
Online help: www.philips.com/support