Philips AquaTrio Cordless 9000 Series User manual

English 6
Čeština 51
Dansk 95
Deutsch 140
Français 187
Italiano 233
Magyar 279
Nederlands 324
Norsk 370
Polski 415
Română 461
Slovensky 506
Suomi 551
Svenska 595

English
6English
Contents
Introduction _______________________________________________________________________________ 6
General description_________________________________________________________________________ 6
Before first use_____________________________________________________________________________ 7
Charging __________________________________________________________________________________ 10
Vacuuming and mopping hard floors _________________________________________________________ 11
Vacuuming soft and hard floors ______________________________________________________________ 15
Cleaning the Vacuum & Mop set-up __________________________________________________________ 20
Cleaning the Vacuum only set-up ____________________________________________________________ 29
Display icons and their meaning______________________________________________________________ 38
Replacement ______________________________________________________________________________ 41
Troubleshooting ___________________________________________________________________________ 41
Using the Vacuum only set-up _______________________________________________________________ 47
Introduction
Thanks for buying this Philips product! To fully benefit from the support that
Philips offers, register your product at www.philips.com/myvacuum9000s.
General description
1 Dust bucket release button
2 Display
3 Cleaning mode button
4 Middle button (AUTOCLEAN)
5 On/off button
6 Battery
7 3-in-1 handheld
8 Dust bucket
9 Wall mount
10 Tube
11 LED nozzle
12 Mini Turbo brush
13 Long crevice tool
14 Adapter
15 Power plug
16 Extra charger (XW9385 only)
17 After-Clean & Storage station
18 Appliance holder
19 After-Clean tray
20 Baseplate
21 Wet module
22 Dirty water tank
23 Clean water tank
24 AquaSpin nozzle
25 Microfiber brushes
26 Philips Floor Cleaner XV1792
27 Cleaning brush

7
English
Before first use
Assembling the After-Clean & Storage station
In order to use the AUTOCLEAN function or store and charge the appliance on
the After-Clean & Storage station, you need to first assemble the station by
clicking the appliance holder into the baseplate.
Tip: It is possible to slide the holder for Vacuum only set-up and put it back
upside down if you want to place the Vacuum only set-up on the other side of
the After-Clean & Storage station.
Note: Make sure that the After-Clean tray is placed in the baseplate and that
the temperature in the room where the appliance is stored, charged and cleaned
is between 5 °C and 35 °C.
Tip: You can hang the cleaning brush on the hook of the appliance holder.
Installing the wall mount