Philips FC9184/01 User manual

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
ServiceManual
Philips Consumer Lifestyle
Vacuum cleaner
FC9184/01
FC9184/11
13/07
PRODUCT INFORMATION
Design
• Color : Star blue
Usability
• Tube type : Metal 2-piece telescopic tube
• Handgrip : Ergonomic grip with air slider
• Tube coupling : Conical
• Action radius : 9.0 m
• Cord length : 6.0 m
• Carrying handle : Top and front
• Dust bag full indicator
• Park or storage assist : Vertical and horizontal
• Power control : Electronic on appliance
• Wheel type : Rubber
Filtration
• Dust bag type : S-bag Ultra Long Performance
• Dust capacity : 5 l
• Exhaust filter : Super Clean Air HEPA 12 filter
• Motor filter : Triple layer
Safety
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
Performance
• Noise level (Lc IEC) : 79 dB
• Airflow (max) : 49 l/s
• Input power (IEC) : 1800 W
• Input power (max) : 2100 W
• Suction power (max) : 475 W
• Vacuum (max) : 35 kPa
Weight and dimensions
• Dimensions of product : 500 x 310 x 300 mm
(L x W x H)
• Weight of product : 5.4 kg
ACCESSORIES
• Standard nozzle : Tri-Active nozzle
• Accessories : Crevice tool, Small nozzle
• Accessory storage : On tubeclip
OPTIONAL (accessories)
• Starter kit FC8060 (Filters and dustbags)

FC9184/01 / FC9184/11
2-9
• To open the appliance, first remove outlet grill (28) and
exhaust filter (7).
• Remove Dustcover (1) using a screwdriver (see picture).
• To reach the inner parts for repair you must first remove
the Top housing with its attached parts.
• Remove On/Off button (5) and cordwinder button (6),
this can be done with a screwdriver (see picture).
• To remove Handle cover (8) first release the 2 snap
connections on the backside (see picture).
• Then with a small screwdriver lift the Handle cover over
the nock on the Top housing (see picture).
• Now you can with a screwdriver remove the complete
Handle cover from the housing (see picture).
• Remove the 2 screws Awhich hold Handle (9) and
screw B(see picture).
A
A
B
Remark:
When assembling the Top housing check that Turn knob
(11) is in the correct position relative to the position of
the potmeter on the PCBA.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE

FC9184/01 / FC9184/11
3-9
• When the Motor and/or Cordwinder have to be
replaced the Upper housing (17) must be removed.
• First remove Brake lever (13) and the spring than
remove screw Cso you can remove cordwinder cover
(14). Take care that the spring does not fall into the
appliance! (see picture).
C
• After removing the 5 screws Dand 3 screws Eon the
back side, the Upper housing can be seperated from the
Lower housing (see pictures).
D
D
D
D
D
EE
E
• When replacing the Cordwinder (21) the Lower housing
insert (19) needs to be removed. Move the Lower
housing insert upwards so the cordwinder can easily be
removed (see picture).
• When assembling take care that the wires from motor
to cordwinder are correctly fixed (see picture).
• The frame that holds Triple filter (18) is attached to
the Upper housing, to remove the frame remove screw
F(see picture).
F
DISASSEMBLY- AND RE-ASSEMBLY ADVISE

FC9184/01 / FC9184/11
4-9
MMotor
S1
Mains
C2
D3 D2
C1
R7
R10
R8
R9
R6
W5
W2
W1
D1
Blue
Brown R3R2
Q1
Triac
C3
5
6
17
7
9
10
15
16
11
8
1
12
2
3
4
18
C7C6
C4
R5
R4
C5
R11
P1
B1
U1
HT46C47
13 14
TP2
TP1 TP5
TP3
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
• To replace Caster assy (4) turn the appliance upside
down, push the Caster assy with a screwdriver up and
pull it out (see picture).
WIRING DIAGRAM
MOTOR
POWER
MODULE
Brown
Blue
CORD WINDER
Black/White Black
M
CIRCUIT DIAGRAM

FC9184/01 / FC9184/11
5-9
PARTS LIST
Pos Service code Description Remark
1
3
4
5
6
4322 009 00631
4322 003 46801
4322 005 33431
4322 003 46671
4322 003 46681
Dust cover
Dustbag holder
Caster assy
On/Off pedal
Cordwinder pedal
Silent Star blue unprinted
Deep black 80231
Deep black 80231
Deep black 80231
7
8
9
10
11
4322 004 92925
4322 003 46741
4322 003 46641
4322 003 46861
4322 003 46651
HEPA lter
Handle cover
Top handle
Top cover
Power control knob
Phoenix
Silent Star blue 61216
Silent Star blue 61216
Deep black 80231
12
13
14
15
16
4322 005 33661
4322 003 46881
4322 003 46691
4322 009 00701
4322 006 24721
Power control ring
Brake lever
Cordwinder cover
Safety valve assy
PCBA
Printed Silver Metallic
Gulo HV
17
18
19
20
21
4322 003 46631
4322 000 39731
4322 003 46621
4322 003 46611
4322 005 33391
Upper housing
Triple Filter
Lower housing insert
Lower housing
Cordwinder
Deep black 80231
Deep black
Deep black
6 m / 4.8 mm plug
22
23
24
25
4322 005 33941
4322 009 00691
4322 000 39671
4322 003 46871
4322 000 39711
Cordwinder
Motor assy Service
Silencer bottom
Rearwheel lock
Silencer top
6 m / Swiss plug
26
27
28
29
30
4322 000 39681
4322 003 46831
4322 003 46661
4322 003 46761
4322 001 75291
Silencer wall
Rearwheel assy
Exhaust grill
Exhaust grill lock
Exhaust seal
Closed
31
32
33
34
35
4322 004 24631
4322 004 24721
4322 004 24811
4322 004 24881
4322 009 00741
Curved bend assy
2 T.T. Tube
Accessory holder assy 2
Tri-Active nozzle
Hose assy LE
Deep black
85 cm Cobra Conical
Deep black Conical 35
Diam. 45 mm

FC9184/01 / FC9184/11
6-9
1
28
29
5
6
7
3
4
EXPLODED VIEW

FC9184/01 / FC9184/11
7-9
14
15
13
9
11
12
10
8
C
B
A
A
16
XY
EXPLODED VIEW

FC9184/01 / FC9184/11
8-9
24
17
18
20
30
25
26
22
23
27
D
XY
EE
E
DF
D
D
D
19
21
EXPLODED VIEW

FC9184/01 / FC9184/11
9-9
34
32
33
35
31
EXPLODED VIEW