Phistek P150VR Installation and operating instructions

1
U
Us se er r M Ma an nu ua al l / / I In ns st ta al ll la at ti io on n G Gu ui id de e
M
Mo od de el l N No o. . P P1 15 50 0V VR R/ /P P1 15 50 0V VG G
Warning! It will cause malfunction if the monitor is operating with unspecified power supply adaptor
or incorrect power voltage. Do not expose this unit in the rain or moisture environment to reduce the
risk of fire or electric shock.
PRECAUTIONS
Do not use the monitor near water.
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a
person and cause serious damage to the appliance. Use only a cart or stand recommended by the
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting
kit approved by the manufacturer and follows the kit instructions.
The monitor should be operated with type of power adaptor indicated on the label.
ormally it is packed with monitor, or using an adaptor approved by the manufacturer.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This
will protect the monitor from being damaged due to power surges.
ever spill liquids on the monitor.
Do not attempt to service the monitor yourself; opening or removing covers can damage to the
monitor or panel. Please refer all servicing to qualified service personnel.
For Wall mount adaptor, wall socket shall be installed near the equipment and shall be easily
accessible.


2
Index:
I. Introduction --------------------------------------------------------------------------------------------------- 3
Features--------------------------------------------------------------------------------------------------------- 3
Unpack the monitor------------------------------------------------------------------------------------------ 3
Check Accessories-------------------------------------------------------------------------------------------- 3
II. Installation----------------------------------------------------------------------------------------------------- 4~
Power Supply & Signal connection ---------------------------------------------------------------------- 4
Capacitive Touch Key Control ------------------------------------------------------------------------------ 4
OSD Lock/ Unlock -------------------------------------------------------------------------------------------- 5
Structure of OSD settings----------------------------------------------------------------------------------- 5
III. For your safety------------------------------------------------------------------------------------------------ 7
IV. Support timing chart ---------------------------------------------------------------------------------------- 7
V. Resistive Touch Panel(P1 0VR only)-------------------------------------------------------------------- 7~11
Touch Driver installation ---------------------------------------------------------------------------------- 8~11
VI. Mechanical dimension------------------------------------------------------------------------------------- 12
VII. EMC Warning Statement----------------------------------------------------------------------------------- 13
FCC Class A Warning ---------------------------------------------------------------------------------------- 13
CISPR 22 class A Warning --------------------------------------------------------------------------------- 13
Taiwan and Other Traditional Chinese Markets Class A Warning ------------------------------ 13
VIII. Product General Specification---------------------------------------------------------------------------- 14

3
I. Introduction
P150VR / P150VG is a 15 inch color TFT LCD monitor, with compact and ecological design.
This monitor produces clear images with the vivid color at resolutions from VGA up to
XGA and used with graphics adapter of scanning frequency from 30KHz to 62KHz in horizontal
sweep while vertical refresh rate is 55Hz to 76 Hz continuously.
On Screen Display provide flexibility with simple & user-friendly controls.
This monitor provides 5-wires Resistive touch panel(P150VR) or a high quality cover lens(P150VG)
to give a full-flat Display..
Features
-15 inch diagonal screen with native display resolution 1024 X 768.
-Full flat front panel with high quality resistive touch panel
-Fully Glossy surface throughout monitor’s appearance.
-Rimless front bezel design, spill & dust proof
-Cable management down routing through the mounting stand
-Light weight, only 2650 g physically.
-5 Wires Resistive Touch Panel Control Function for P150VR
-Mitsubishi PMMA cover lens for P150VG
Unpack the monitor
-Put the monitor on a clean surface; make sure the box in upright position.
-Remove packing materials from inside of box.
Check accessory
Please make sure the entire accessory is included:
Mini 14p VGA cable Power Adaptor
User guide & Driver CD
USB cable for P150VR only

4
II. Installation:
 Power Supply & Signal connection:
Power supply: Use attached Wall-mount Power adaptor to get 12Vdc power.
VGA signal: Use attached 1.8 meter 14pin Mini VGA cable to connect System PC.
Touch Control: Use attached USB cable to connect system PC.
Capacitive Touch Key Control
Power
( )
Use the power switch to turn the power O or OFF. We recommend turning
your system power on first, then the LCD monitor.
Press Power key to turn on and Press again for 2~3sec. to power off monitor
Auto Adjust
(AUTO)
a. Pressing to execute AUTO-Adjusting function. This function will optimize
the display image
b. Sometimes this function can't achieve the optimal effects. Please follow th
e
manual adjusting procedure.
c. After OSD menu is activated, press this key can turn off the OSD menu.
Mini 14p
VGA cable
to System
PC
Power
connector
to wall
Touch Control
(Mini USB cable
to PC) for
P150VR only

5
Menu
(ME U)
a. Press Menu key to activate OSD Menu
b. This key also means “OK”;
Press “Up, Down” key to move the indicator to the desired item, then press
Menu key to select and read to adjust.
After adjustment, press this key to return to previous Menu.
Up
( ▲ )
a. When OSD mode is activated (When “ME U” key is pressed). These two
keys are used to select the adjustment items.
b. When adjustment item is selected, these two keys are defined to decrease
or increase the value of each selected item.
c. Direct access “Up” Key will reveal Brightness OSD for adjustment.
Direct access “Down” key will reveal Volume OSD for adjustment.
Down
( ▼ )
OSD Lock/ Unlock:
Press “Menu” Key for more than 7 seconds shall lock all control keys function.
After keys locked, press “Menu” key again for more than 7 second shall unlock the key
function.
Structure of OSD settings
Main
Menu
Level 1 Level 2 Level 3 Operating Procedure
Auto Adjust Press “UP” or “DOWN” to adjust -phase & -position &
V-position clock automatically.
Luminance Brightness Press “UP” key to increase brightness, “DOWN” key to decrease
brightness.
Contrast Press “UP” key to increase contrast, “DOWN” key to decrease
contrast.
Black levels Press “UP” key to increase background brightness, “DOWN” key
to decrease background brightness.
Sharpness Press “UP” key to increase image sharpness, “DOWN” key to
decrease image sharpness.
Exit Exit to previous Menu
Management
. Position Press “UP” key to shift screen left, “DOWN” key to shift screen
right.
V. Position Press “UP” key to shift picture upward, “DOWN” key to shift
picture downward.
Pixel Clock
To reduce any vertical bars or strips visible on the
screen background. Adjusting the Clock will also
change the horizontal screen image width
Phase To remove any horizontal noise and clear or sharpen the image
of characters.
Exit Exit to previous Menu

6
Color
9300K Press “UP” or “DOW
N” to choose three types of color
temperature 9300°k, 6500°k, sRGB and user define.
Select User Preset to enter Color Adjust Menu,
Select desired color to adjust
Select “Exit” to return previous menu
6500K −
Main
Menu
sRGB
User Preset
Red
Green
Blue
Exit
Exit − Exit to Main Menu
Volume −
Press “UP” key to increase Volume, “DOWN” key to decrease
Volume. Press “Menu” Key to return to Main Menu.
OSD
. Position
−
Adjust OSD Menu horizontal position, press “UP” key to shift
Menu right, “DOWN” key to shift Menu left
V. Position Adjust OSD Menu vertical position, press “UP” key to shift Menu
upward, “DOWN” key to shift Menu downward
OSD Time
Sets the time duration in seconds that the OSD is visible after the
last button is pressed.
Exit Exit to previous Menu
Language
English
Francais
Deutsch
Italino
Espanol
日本語
繁體中文
简体中文
−
Press Up/Down key to move OSD bar to desired language,
Then press to confirm, the OSD Menu will change to desired
language and return to Main Menu.
Recall
Recall color
Recall All
Exit
Yes No
Yes No
Press ”Yes” to reset Color to factory setting
Press “Yes” to rest all settings back to factory setting, except
language
Press “Exit” to return to Main Menu
Information
Display
information
Exit
−
Press Display information to display resolution and refresh rate
Press “Exit” to return to Main Menu
Ext − − Press “Exit” key will close OSD Menu and save the settings

7
III. For your safety
1. When move the monitor, always switch off power and disconnect all cables to avoid any danger.
2. Please use the power and signal cables correctly when install it.
3. In case of notice any abnormal smell or noise, please stop operation and call the nearest dealer or
service center.
IV. Support timing chart
Timing
Mode
Reference
Standard
Resolution
Pixel
MHz FH KHz
FV Hz Interlace
H
Polarity
V
Polarity
Mode 1
VESA 1024 x 768
65.000
48.363
60.004
O − −
Mode 2
VESA 1024 x 768
75.000
56.476
70.069
O − −
Mode 3
VESA 1024 x 768
78.750
60.023
75.029
O + +
Mode 4
VESA 800 × 600
36.000
35.156
56.250
O + +
Mode 5
VESA 800 × 600
40.000
37.879
60.317
O + +
Mode 6
VESA 800 × 600
50.000
48.077
72.188
O + +
Mode 7
VESA 800 x 600
49.50 46.880
75.000
O + +
Mode 8
VGA 640 x 480
25.17 31.47 59.94 O − −
Mode 9
Mac 640 x 480
30.24 35.00 66.67 O − −
Mode 10
VGA 720 x 400 28.32 31.47 70.08 O − +
V. Resistive Touch Panel: (P1 0VR only)
Panel:
Type : Five-Wires Analog Resistive
Input Mode : Stylus or Fingers
Transparency : 80% +/- 5%
Build-in Touch Control Module:
( ote: For Panel Touch Control, user need to connect upstream cable to System PC)
Control type : USB
Touch Control Driver : eGalax Touch Drivers

8
Touch Driver installation: (P1 0VR only)
The attached CD include EETI Touch Driver
1.0 Screen display as below, please click ext>.

9
2.0 Select the set up type, don’t tick the box if PS2 interface is not required,
Click “ ext>
.
3.0 RS232 interface driver installed is default, please click ext>

10
4.0 You can select to do Touch screen calibration after system boot up or not
Default setting is” one”
5.0 Select to use Multi-Monitor system, then press ext>

11
6.0 Choose destination location, default folder location shown as below.
Press ext>
7.0 Figure shown below, please press ext> to complete installation

12
VI. Mechanical dimension

13
VII. EMC Warning:
FCC Class A Warning
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.

14
VIII. Product General Specification:
Model P150VR/P150VG
Display size 15”
Display Area 304.1mm( )x228.1mm(V)
Optimal Resolution 1024 x 768
Brightness 250 cd/m² (typ)
Contrast Ratio 600:1(typ)
Response Time 8 ms (typ.)
Viewing Angle V: 160 , : 160
Video Signal input connector
Mini VGA 14p
Signal cable
1.8meter cable with Mini 14p VGA plug connect to
monitor and VGA miniature D sub connector on
the other end for connecting to PC or System.
Power supply Adaptor
Wall mount type power adaptor
Input: 100~240AC 0.5A, Output: 12Vdc 1.5A
Power consumption
<18W
Input Frequency
: 30 - 62 k z ; V: 55-76 z
Cover Lens
(P150VG only)
Mitsubishi PMMA ardness>5 (JIS D0202),
T >90%
Resistive Touch Panel (P150VR only) Type
Five-Wire Analog Resistive
Input Mode
Stylus or Finger
Touch Control type
USB
Touch Control Driver
eGalax Touch
Touch control cable
1.8 meter cable; one end with Mini USB B type
connect to monitor, the other end is USB A type
connect to ost PC
Temperature Operating : 0℃~40℃ ; Storage : -10℃~50℃
Weight 2650g (net)
Physical Dimension 360.6 x 290.5 x 200 (mm)
Approvals CE, FCC, BSMI
MTBF (LED backlight) 30,000 hrs.
Wall Mount type VESA 75 * 75 mm
Optional item
Color
White
*Product specification to be changed without prior notice
*Made In Taiwan