Pineapple SEAL User manual

REQUIRED
ITEMS
SEAL ADDINGBALLAST
aFurniture blankets
aT45 Security torx bit
aX10 feet cups and caps (x6 for the chair) - supplied
aX4 bags of sand (x2 for the chair)
aX2 strong bags and cable ties (x1 for the chair) - supplied
800.496.9324
T
E
[e-mail]

04
01
Seal will come partially assembled with
the baseplate bolted on.Carefully place
Seal upturned onto a supporting structure
ensuring seal doesn’t get damaged in the
process by using furniture blankets etc.
02
03
Remove all the security bolts and carefully
lift out the baseplate.
Place sand (x2 for 2-seater) into strong bags
either side of the partition box and ensure
they are sealed with the cable ties.
Replace the baseplate then attach the cups
using the M10 security screws. Finally tap in
the caps to finish off the feet.
T
E
SEAL ADDINGBALLAST
800.496.9324
[e-mail]

Please read all instructions carefully to ensure proper assembly. Failure to read and
follow instructions may result in voided guarantees
Ensure the proper and adequate hardware is used
Pineapple shall not be held liable for any consequences caused by the improper
assembly of products
T
E
DISCLAIMER
800.496.9324
[e-mail]