Pinghu City Xiao Ming Xing Children's Products LAMBORGHINI Veneno Datasheet

OWNERS MANUAL
Please keep this manual for future reference as it contains important information.
Before first time use, charge the battery for at least 4-6 hours.
Read and understand this entire manual before using!
with Assembly Instructions
• Suitable for 3+ Years
• Maximum user weight: 50kg
Ride On Toy
LAMBORGHINI Veneno

A
12V7AH X1
12V700-1000mA
550-12000
12V7AH X2
12V1500mA
550-10000
12V10AH X1
12V900-1000mA
550-10000
About Your New Vehicle │ 1
Specification
●Non-rechargeable batteries are not to be recharged.
●If removable rechargeable batteries are used, the are only to be charged under adult supervision.
●Remove rechargeable batteries from the product before charging.
●Do not mix old and new batteries. Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
●Insert batteries as indicated inside the battery compartment, anode to anode, cathode to cathode.
●Remove batteries during long periods of non-use. Always remove exhausted batteries from the
product. Battery leakage and corrosion can damage this product. Dispose of batteries safely.
●Never short circuit the battery terminals.
BATTERY INFORMATION
Suitable age:
Charge time:
Load capacity:
Size of car:
Speed:
3+ Years
8-12 hours
Under 50 kg
136 x 75 x 50.5 cm
2-8 km/h
2WD 4WD 4WD
Battery
Charger
input
Motor
Depend on local voltage
LAMBORGHINI Veneno Children Electric Ride On manufactured by Pinghu City Xiao
Ming Xing Children’s Co., Ltd. LAMBORGHINI and all other associated marks,
emblems and designs are intellectual property rights of Automobili Lamborghini
S.p.A. and used with permission.

B
1
2
2
6
4
4
1
1
1
1
2
2
14
1
2
1
1
2
1
1
1
4
/
4
4
4
1
1
1
1
2
2
14
1
2
1
1
2
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
NO. PART NAME Q’TY (PCS) REMARK
Vehicle body
Driving wheel
Front wheel
Ø12 washer
Lock nut
Hubcap
Steering wheel
M5X38 machine screw
Ø5 lock nut
Windshield
Side mirror
Side spoiler
Ø4x12 screw
Spoiler support
Spoiler wing
Seat back
Seat cushion
Spanner
Charger
Remote controller
Parts List │ 2
4WD 2WD
Screwdriver (not included)
• Assembly tools required:
left and right
left and right
left and right
If equipped, only for type R/C

SP
1
8
11
17
13
13
12
12
15
13
13
13
13
13
9
7
10
14
15
16
11
18
2
4
4
5
5
3
6
6
4
19
20
C
HINT: Some parts shown are assembled on both sides of vehicle
Parts Diagram │ 3

D
WARNING:
• CHOKING HAZARD! Not suitable for children under 36 months.
• ADULT ASSEMBLY REQUIRED.
PREVENT INJURIES AND DEATHS:
• NEVER LEAVE CHILD UNATTENDED. ADULT DIRECT SUPERVISION IS REQUIRED. Always keep
child in view when child is in vehicle.
Rules for Safe Riding
• This vehicle has adjustable play seat belts. Please instruct children how to tie the safety belt before
using, guarantee the security.
• Keep Children within Safe Riding Areas:
- Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps,
swimming pools or other bodies of water;
• Use the toy only on flat surfaces. Such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident.
Operate the vehicle only in the daytime or a well-lit area.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• Do not let any child touch the wheels or be near them when the car is moving .
• This toy should be used with caution since skill is required to avoid falls or collisions causing
injury to the user or third parties.
• Protective equipment should be worn.
• Never use in roadways, near cars, on or near steep inclines or steps, swimming pools or
other bodies of water.
• Always wear shoes, always sit on the seat.
• Not to be used in traffic.
• This toy is unsuitable for children under 36 months due to its maximum speed; Maximum user
weight is 50 kg.
• This toy has no brake.
Safety │ 4

4
567
1
7
2
3
E
1. Slide a driving wheel onto the rear axle.
2. Slide a Ø12 washer onto the rear axle.
3. Tighten a lock nut to the end of the rear axle with a spanner.
4-6. Repeat for the other rear wheel.
Hint: An extra spanner has been provided to hold the lock nut on the other side of the
rear alxe while tightening the lock nut on the other side.
7. “Snap” the hubcap to the driving wheel.
Attach the Rear Wheels │ 5
Rear bottom view

1
345
2
ABCD
E
Attach the Front Wheels │ 6
Remove all the parts from the front axle.
1. Slide a Ø12 washer onto the front axle.
2. Slide a front wheel onto the front axle.
3. Slide a Ø12 washer onto the front axle.
4. Tighten a lock nut to the end of the front axle with a spanner.
5. “Snap” the hubcap to the driving wheel.
Repeat for the other front wheel.
Remove all the parts from the front axle.
A. Slide a driving wheel onto the front axle.
B. Slide a Ø12 washer onto the front axle.
C. Tighten a lock nut to the end of the front axle with a spanner.
D. “Snap” the hubcap to the driving wheel.
Repeat for the other front wheel.
Front bottom view
4WD
2WD
Front bottom view

1
2
3
4
56
EAttach the Steering Wheel, Windshield& Side Mirrors │ 7
1. Plug the sound unit connector on the steering wheel into the connector on the
vehicle body.
2. Fit the steering wheel to the end of the steering column.
3. Line up the holes on the steering wheel with the holes on the steering column,
insert the M5x38 machine screw.
4. Fasten a lock nut on the opposite end of the screw with a screwdriver.
5. Insert the tabs on the windshield into the slots on the vehicle, push until you
hear ”click” into place.
6. Fit side mirrors to the vehice body.
Front view

1
3
4
5
6
1
2
R
L
E
Attach the SIde Window &Wing Mirror │ 8
1. Fit the spoiler wings to the spoiler support.
2. Insert two Ø4x12 screws through the spoiler wing R
and into the spoiler L. Tighten with a screwdriver.
3. Fit the side spoiler against the spoiler wing.
4. Insert and tighten two Ø4x12 screws through the side
spoiler and into spoiler wing with a screwidriver.
Repeat for the other side spoiler.
5. Fit the spoiler assembly to the
vehicle body.
6. Insert and tighten two Ø4x12 screws
to secure it with a screwdriver.
Rear top view

1
5
2
4
3
EConnect the Power Supply & Attach the Seat │ 9
1. Plug the Red connector on the vehicle into the red connector on the battery.
2. Fit the seat cushion into the seat back.
3. Insert and tighten four Ø4x12 screws with a screwdriver.
4. Insert the tabs on the seat back into the slots on the vehicle body.
5. Insert two Ø4x12 screws and tighten with a screwdriver.
Top view
Vehicle connector
Battery connector

F
B
A
I
K
L
J
C
D
E
FG
H
A. Power Switch: Press it to power on the vehicle,
long press it for 3 seconds to power off.
B. Forward/Reverse switch:
Changes the direction that vehicle moves from forward to
reverse. The vehicle equipped with 2 speeds in forward:
high speed / low speed.
C. Display screen: It displays the power level of the battery when the vehicle stops. When the numerical
value is less than 12, recharge the battery please.
D: Lights button: Turns the lights on and off.
E: Play / Pause
F. Previous / decrease volume
G. Next / Increase volume
H. Rocking mode
I. USB interface: Allow the audio from your portable device to be played through the vehicle speakers.
MP3 format ONLY.
J. 3.5mm AUX input: Allow the audio from your portable music player or phone to be played through the
vehicle speakers. MP3 format ONLY.
K. Music mode
L. Change the audio input from the FM radio, USB, AUX input or Bluetooth
Under the FM radio mode, long press button E (play/pause) for radio searching. When your phone
connecoted to the product with bluetooth, the product could answer the call through the microphone inside
the dash.
1. Foot pedal: ●To move the vehicle, press the pedal down.
●To brake or slow down, release pressure from the pedal.
2. Horn button: Press for horn playing.
3. 2WD/4WD switch (4WD product only):
Changes the vehicle moves in 2WD or 4WD mode.
1
2
3
Always stop vehicle
when changing the
speed or direction to
avoid damage the
gears and motor.
IMPORTANT!
Using Your New Vehicle

SP
W
G
Use the Remote Controller │ 12
• Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
• Rebuild connection when you replace the batteries of the remote controller.
Attach the batteries of controller
Lift the battery compartment door on the back of the controller and insert two
AAA(LR03) batteries.
HINT: Batteries not included. Refer to the Battery Information on the page 1.
NOTE:
1. Connection button (Build connection)
Long press the Connection buttons for 3 seconds, and the low speed indicator
flashes. Then power on the vehicle, the low speed indicator goes to long bright,
means the connection successful. If the low speed indicator no response,
means the connection failed. Replace the batteries and retry.
2. Brake button
Press the button to stop the vehicle, press it again to release the brake.
3. Speed select button
The switch operates the vehicle to move in low, normal and high speed.
HINT: This switch won’t work while your vehicle moves reverse.
Speed select
button
High speed indicator
Normal speed indicator
Low speed indicator
Connection button
Forward button
Reverse button
Left button
Brake button
Right button

H
1. Plug the charger port into the input socket. (below the seat)
2. Plug the charger plug into a wall outlet. The battery will begin charging.
21
WARNING!
ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!
WARNING!
This product with Charging Protection: when charging, all functions will be cut
off! Only an adult can charge and recharge the battery!
• The POWER SWITCH must be turned in OFF position when charging.
• Before the first use, you should charge the battery for 4-6 hours. Do not recharge the
battery for more than 10 hours to avoid overheating the charger.
• When the vehicle begins to run slowly, recharge the battery.
• After each use or once a month minimum recharge time as 8 to 12 hours, less than 20
hours at most.
• Use the only rechargeable battery and charger supplied with your vehicle. NEVER
substitute the battery or the charger with another brand. Using another battery or charger
may cause a fire or explosion.
• Do not use the battery or charger for any other product.
Charging │ 13

ITroubleshooting Guide │ 14
.
Problem Possible Cause Solution
Vehicle does not run
Vehicle does not run
very long
Vehicle runs sluggishly
Vehicle needs a push
to go forward
Difficult shifting from
forward to reverse or
vice-versa
Loud grinding or clicking
noises coming from
motor or gear box
Battery low on power
Thermal fuse has tripped
Battery connector or wires
are loose
Battery is dead
Electrical system is damaged
Motor is damaged
Battery is under charged
Battery is old
Battery is old
Vehicle is overload
Vehicle is being used in harsh
conditions
Poor contact of wires or
Connectors
“Dead Spot” on motor
Motor or gears are damaged
Battery low on power
Recharge battery.
Reset fuse, see <Fuse>
Check that the battery connectors are firmly plugged
into each other. If wires are loose around the motor
contact your distributor please.
Check that the battery connectors are firmly plugged
into each other. If wires are loose around the motor,
contact your distributor please.
A dead spot means the electric power is not being
delivered to the terminal connection and the vehicle
needs repair. Contact your distributor please.
Attempting to shift while the
vehicle is motion
Completely stop the vehicle and shift, see <Use Your
New Vehicle>
Check that the battery connectors are firmly plugged
into each other when recharging
Replace battery, contact your distributor please.
Replace battery, contact your distributor please.
Replace battery, contact your distributor please.
Reduce weight on vehicle. Maximum user weight is
50 kg.
Avoid using vehicle in harsh conditions ,see <Safety>.
Recharge battery, contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Battery will not
recharge
Charger feels warm
when recharging
Battery connector or adapter
connector is loose
Charger not plugged in
Charger is not working
This is normal and not a
cause for concern
Check that the battery connectors are firmly plugged
into each other.
Check that the battery charger is plugged into a
working wall outlet.
Completely read through this manual and the troubleshooting guide table before calling. If you
still need help resolving the problem Contact your distributor please.

J
Maintaining
• It is parents' responsibility to check main parts of the toy before using, Must regularly
examine for potential hazard, such as the battery, charge,cable or cord, plug, screws are
fastening enclosure of other parts and that in the event of such damage, the toy must
not be used until that damage had been properly removed.
• Make sure the plastic parts of the vehicle are not cracked or broken.
• Occasionally use a lightweight oil to lubricate moving parts such as wheels.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts
may melt.
• Recharge the battery after each use. Only an adult can handle the battery. Recharge the
battery at least once a month when the vehicle Raider is not being used.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water. Do
not drive the vehicle in rainy or snowy weather. Water will damage the motor, electric
system and battery.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax
furniture polish. Do not use car wax. Do not use abrasive cleaners.
• Do not drive the vehicle in loose dirt, sand or fine gravel which could damage the moving
parts, motors or the electric system.
• When not using, all the electrical source should be turn off. Turn off the power switch and
disconnect the battery connection.

K
Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.
Disposal Of Battery
● Your sealed lead-acid battery must be recycled or disposed of in an environ-
mentally sound manner.
● Do not dispose of your lead-acid battery in a fire. The battery may explode or
leak.
● Do not dispose of a lead-acid battery in your regular, household trash. The
incineration, land filling or mixing of sealed lead-acid batteries with household
trash is prohibited by law.