PIONEER DJ DDJ-400 User manual

pioneerdj.com/support/
For FAQs and other support information for this product, visit the above website.
「
djayPRO for Windows」
Audio Setu
p
Guide

C
onnec
ti
ng
t
o a
PC
*1 RCA audio cables are not supplied
with the unit.
*2 Adjust the volume of the device* connected
to the [MASTER] output until you have
a volume level you're happy with.
*Speakers with built-in amplifiers, etc.
*3 The [MIC] input supports
only unbalanced input.
*4 If you don't use a microphone, minimize the volume level
using the [MIC LEVEL] knob.
*5 Be sure to use the supplied USB cable
for constant high-level performance.
If your PC has only a USB Type-C port, you'll need
to use a USB Type-C male to USB-A female cable (sold separately).
Be sure to launch djayPRO for Windows first,
then connect the unit with your PC using the supplied USB cable.
PC
Speakers with built-in
amplifiers*1,*2
Microphone
*3,*4
USB cable (supplied)
*5
Headphones
1

Prior to use (important)
・Download djayPRO for Windows from the Microsoft Store. (paid feature)
https://www.microsoft.com/en-us/p/djay-pro/9nblggh4vm4h?activetab=pivot:overviewtab
・If you already have djayPRO for Windows installed, update it to the latest version.
・If your PC has only a USB Type-C port, you'll need to use a USB Type-C male to USB-A female cable (sold separately).
・Refer to the Hardware Diagram on the Pioneer DJ support page for functions you can control from the unit.
Precautions
djayPRO for Windows is a DJ software made by Algoriddim GmbH. Refer to the Algoriddim website for the app.
https://www.algoriddim.com/
The URL listed in this guide is as of June 2019 and are subject to change.
System requirements
Supported operating systems: Windows® 10 Version 1607 or later (32/64-bit)
USB port: Your PC must have a USB 2.0 port to connect with the unit.
Internet connection: You'll need an internet connection for downloading the software and streaming.
For information on the latest system requirements, compatibility and supported operating systems, visit the Microsoft Store.
https://www.microsoft.com/en-us/p/djay-pro/9nblggh4vm4h?activetab=pivot:overviewtab
Turn the power on.
First, turn on your PC. Then, turn on the power of all connected devices such as speakers with built-in amplifiers.
Be sure to launch djayPRO for Windows first, then connect the unit with your PC using the supplied USB cable.
Check the audio device settings
Follow the instructions below to confirm that the unit is recognized as an audio device.
1. Click [ ] on the top-left corner of the screen and click [Configure audio device].
2

2. On the Device screen, check that the settings are as follows.
If not, select the items as follows, and click [Apply].
About trademarks and registered trademarks
・Pioneer DJ is a trademark of PIONEER CORPORATION and is used under license.
・djay and its logo are trade names or registered trademarks of Algoriddim GmbH.
・Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
Other trademarks and trade names are the property of their respective owners.
© 2019 Pioneer DJ Corporation
3