Pioneer Eclipse SPEEDSTAR ST21KWA User manual

Operator’s Manual
Propane Burnisher with Vacuum
Failure to read and understand this manual
before operating this machine or performing service on
this machine may result in injury to the operator or
nearby personnel or result in damage to the machine
or nearby property. Each operator must be trained in
the operation of this machine before being allowed to
use it. Contact Amano Pioneer Eclipse Customer
Service at 1-800-367-3550 or 1-336-372-8080 or an
authorized Amano Pioneer Eclipse Distributor to
inquire about training or to request a replacement
manual.
La falta de leer y de entender este manual antes de
usar esta máquina o de realizar servicio en esta
máquina puede dar lugar a lesión al operador o al
personal próximo o a resultado en daño a la máquina
o propiedad próxima. Cada operador debe ser
entrenado en la operación de esta máquina antes de
ser permitido utilizarla. Ponerse en contacto con el
servicio de Amano Pioneer Eclipse 1-800-367-3550 o
1-336-372-8080 o un distribuidor autorizado por
Amano Pioneer Eclipse para investigar sobre el
entrenamiento o para solicitar un manual.
Manquer de lire et de comprendre ce manuel
d'utilisation avant l'utilisation de cette machine ou
avant faire de maintenance sur la machine peut être
résulter en blessure à l'opérateur ou au personnel
proche ou peut endommagé la machine ou la propriété
proche. Chaque utilisateur doit être entraîné dans
l'opération de cette polisseuse avant l'utilisation.
Veuillez contacter le service àpres-vente de Amano
Pioneer Eclipse à 1-800-367-3550 ou 1-336-372-8080
et/ou un distributeur de Amano Pioneer Eclipse pour
vous renseigner concernant l'entraînement ou pour
obtenir un autre manuel d'utilisation.
For Models:
ST21KWA
ST21KWAE
ST24KWA
ST24KWAE
ST28KWA
ST28KWAE

Record This Important Information
Date of Purchase
Purchased From
Address
City State Zip
Phone Contact
Machine Model
Machine Serial Number
Engine Type
Engine Serial Number
Important Phone Numbers
Medical Emergency
Police
Fire Department
FOR YOUR SAFETY
IF YOU SMELL GAS:
1. Open window.
2. Don't touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas
supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.

zAllow only qualified and trained personnel to
operate equipment.
zFollow maintenance and operating instructions.
zKeep accurate records of maintenance and
service in the provided log book.
zRemember, routine maintenance NOW will
prevent a breakdown LATER.
zCheck oil level before starting.
zKeep nuts and bolts tightened and hose
connections snug.
zRefer to engine manufacturer’s service manual
or contact Amano Pioneer Eclipse for engine
repairs or adjustments not listed in this manual.
zNever alter or reconstruct the fuel system. To
do so may be dangerous and will void the
factory warranty.
zUse UL, CTC/DOT listed Safe-Fill™
cylinders supplied by Amano Pioneer Eclipse.
zBe careful not to cross thread the Rego
coupling on the fuel cylinder.
zStore the fuel cylinder outside away from heat
and direct sunlight.
zCheck pad holder for cracks each time the pad
is changed.
zHave the machine serviced by a certified
technician, including an emission check, every
three (3) months.
zBefore attempting any service on the machine,
turn the ignition switch “OFF” and remove the
key to avoid accidental start-up.
WARNING: Operate in a well ventilated area.
(Catalytic mufflers need to warm up before they are
effective. Failure to do so may cause nausea or
carbon monoxide poisoning.)
WARNING: Keep hands and feet clear of rotating
pad! Inspect pad holders regularly. (A fractured pad
holder may result in pad holder fragments causing
injury.)
WARNING: Failure to follow the instructions and
warnings appearing in this operating manual or on
machine labels may result in serious injury to the
person using the machine and possibly to other
persons and property.
NOTE: This machine is manufactured for
commercial use only.
Propane powered floor burnishers are designed and
manufactured for ultra high speed commercial floor
burnishing only. These machines are designed to
burnish most modern types of floors including
composition tile, stone, marble, terrazzo, and resilient
floor covering using floor coatings designed for ultra
high speed burnishing.
Even though NFPA 58 8-4.5 says ...”these machines
shall be permitted to be used in buildings frequented
by the public, including the times when such buildings
are occupied by the public,” Amano Pioneer Eclipse
suggests usage when occupancy of a given work
area is minimal.
These machines should not be used:
zin nursing homes, hospitals, day-care centers,
etc.
zby unqualified or untrained personnel.
zunless properly maintained and adjusted.
zon areas with obstructions such as thresholds,
floor outlet boxes, etc.
zin areas where loose tile or other objects are
present.
zin rooms without proper ventilation.
These machines should not be left running
unattended.
CAUTION: Do not allow the burnisher to
operate without moving the machine. It may
burn the floor and damage the floor
covering.
Safe Operating Practices
PROPOSITION 65 WARNING
Battery posts, terminals, and related accessories
contain lead and lead compounds, chemicals
known to the State of California to cause cancer
and reproductive harm. Wash hands after handling.

ST21KWA(E)
Pad Size 21” (53,3 cm)
Pad Speed 2000 RPM
Width 23.5” (59,7 cm)
Length (handle up) 48” (122 cm)
Engine Kawasaki 17 HP
Starting 12 V Battery
Weight 215 lbs. (97,5 kg)
Handle Bent Tube with Bail
Deck Cast Aluminum
Vibration Less than 2.5 m/s
Sound Level 87 dB(A)
ST24KWA(E)
Pad Size 24” (61 cm)
Pad Speed 1800 RPM
Width 26.25” (66,7 cm)
Length 51” (130 cm)
Engine Kawasaki 17 HP
Starting 12 V Battery
Weight 220 lbs. (100 kg)
Handle Bent Tube with Bail
Deck Cast Aluminum
Vibration Less than 2.5 m/s
Sound Level 87 dB(A)
ST28KWA(E)
Pad Size 28” (71,1 cm)
Pad Speed 1700 RPM
Width 30” (76,2 cm)
Length 54” (137 cm)
Engine Kawasaki 17 HP
Starting 12 V Battery
Weight 225 lbs. (157 kg)
Handle Bent Tube with Bail
Deck Cast Aluminum
Vibration Less than 2.5 m/s
Sound Level 87 dB(A)
Specifications