Pioneer Gm-me600x6 User manual

Owner’s Manual

Mode d’emploi

MARINE 6-CHANNEL AMPLIFIER

AMPLIFICATEUR 6 CANAUX MARIN

GM-ME600X6

English

Français

Before you start

Thank you

for purchasing this PIONEER

product

To ensure proper use, please read through this

manual before using this product. It is espe-

cially important that you read and observe

WARNINGS and CAUTIONS in this manual.

Please keep the manual in a safe and accessi-

ble place for future reference.

Information to User

Alteration or modifications carried out without

appropriate authorization may invalidate the

user’s right to operate the equipment.

Note

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reason-

able protection against harmful interference

in a residential installation. This equipment

generates, uses and can radiate radio fre-

quency energy and, if not installed and used

in accordance with the instructions, may

cause harmful interference to radio commu-

nications. However, there is no guarantee

that interference will not occur in a particu-

lar installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

—

Reorient or relocate the receiving

antenna.

—

Increase the separation between the

equipment and receiver.

—

Connect the equipment into an out-

let on a circuit different from that to

which the receiver is connected.

—

Consult the dealer or an experienced

radio/TV technician for help.

FEDERAL COMMUNICATIONS

COMMISSION SUPPLIER’S DECLARATION

OF CONFORMITY

Product Name: Marine 6-channel Amplifier

Model Number: GM-ME600X6

Responsible Party Name: PIONEER

ELECTRONICS (USA) INC.

SERVICE SUPPORT DIVISION

Address: 2050 W. 190TH STREET, SUITE 100,

TORRANCE, CA 90504, U.S.A.

Phone: 1-800-421-1404

URL:

https://www.pioneerelectronics.com/PUSA/

After-sales service for

Pioneer products

Please contact the authorized Pioneer dealer

from which you purchased this unit or an

authorized Pioneer service company for after-

sales service or questions you may have about

the product. You may contact Pioneer directly

as follows:

Do not ship your unit in for repair

VHSGNTSÐBNMS@BSHMFÐ/HNMDDQÐÆQRSÐ

Units sent without a return authoriza-

SHNMÐMTLADQÐVHKKÐADÐQDETRDC

USA & CANADA

Pioneer Electronics (USA) Inc.

CUSTOMER SUPPORT DIVISION

P.O. B o x 176 0

Long Beach, CA 90801-1760 U.S.A.

800-421-1404

For warranty information, please see the

Limited Warranty sheet included with this unit.

Visit our website

U.S.:

https://www.pioneerelectronics.com/PUSA/

Canada:

https://www.pioneerelectronics.ca/POCEN/

Learn about product updates (such as

firmware updates) for your product.

Register your product.

Access owner’s manuals, spare parts infor-

mation, service information, and much more.

The Safety of Your Ears is in

Your Hands

Get the most out of your equipment by playing

it at a safe level—a level that lets the sound

come through clearly without annoying blar-

ing or distortion and, most importantly, with-

out affecting your sensitive hearing. Sound

can be deceiving. Over time, your hearing

“comfort level” adapts to higher volumes of

sound, so what sounds “normal” can actually

be loud and harmful to your hearing. Guard

against this by setting your equipment at a

safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

Set your volume control at a low setting.

Slowly increase the sound until you can

hear it comfortably and clearly, without

distortion.

Once you have established a comfortable

sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING

GUIDELINES:

Do not turn up the volume so high that you

can’t hear what’s around you.

Use caution or temporarily discontinue use

in potentially hazardous situations.

Do not use headphones while operating a

boat; the use of headphones may create a

traffic hazard and is illegal in many areas.

Before connecting/installing

SGDÐ@LOKHÆDQ

WARNING

To prevent fire hazard, the heatsink should never

be covered (such as by paper, material, etc.).

This unit is for boats with a 12 V battery and

negative grounding. Before installing, check

the battery voltage.

When installing this unit, make sure to con-

nect the ground wire first. Ensure that the

ground wire is properly connected to the neg-

ative ground circuit of the boat. Use adequate

gauge, marine grade electrical wire that has

been properly terminated for marine use to

make a direct connection to the negative bus

bar or negative ground distribution system.

Do not attempt to ground the amplifier using

the mounting screws.



Use fused marine grade battery wire (sold

separately) of adequate gauge that has been

properly terminated for marine use to make

a direct connection to the positive bus bar or

positive distribution system.



If the screw for the ground wire loos-

DMRÐNQÐE@KKRÐNTSÐHSÐBNTKCÐQDRTKSÐHMÐÆQDÐ

RLNJDÐNQÐL@KETMBSHNM

Always use a fuse of the rating prescribed.

The use of an improper fuse could result in

overheating and smoke, damage to the prod-

uct, and injury, including burns.

Check all electrical and signal connections

(power, ground, amplifier, speaker, etc.) if

amplifier fuse or battery wire fuse blows.

Resolve any loose or short circuited connec-

tions, then replace the blown fuse with an

identical value equivalent.

Always install the amplifier on an even sur-

face. Do not install the amplifier on a surface

that is uneven or has a protrusion. Doing so

could result in malfunction.

When installing the amplifier, do not allow

parts such as extra screws to get caught

between the amplifier and the boat. Doing so

could cause malfunction.



Do not allow this unit to come into

BNMS@BSÐVHSGÐKHPTHCRÐ$KDBSQHB@KÐRGNBJÐ

BNTKCÐQDRTKSÐ KRNÐC@L@FDÐSNÐSGHRÐTMHSÐ

smoke, and overheating could result

EQNLÐBNMS@BSÐVHSGÐKHPTHCRÐ3GDÐRTQE@BDRÐ

NEÐSGDÐ@LOKHÆDQÐ@MCÐ@MXÐ@SS@BGDCÐ

speakers may also heat up and cause

ATQMR

In the event of any abnormality, the power

supply to the amplifier may cut off to prevent

equipment malfunction. If this occurs, switch

the system power off and check all electrical

and signal connections (power, ground, ampli-

fier, speaker, etc.) for loose or short circuited

connections. If you are unable to determine

the cause, please contact your dealer.

Always disconnect the negative terminal

of the battery before making any electrical or

signal connections to avoid the risk of electric

shock or short circuit during installation.

Do not attempt to disassemble or modify

this unit. Doing so may result in fire, electric

shock or other malfunction. Damage or

defects resulting from alterations or modifica-

tions not authorized in writing by Pioneer are

excluded from limited warranty coverage.

This amplifier is designed for marine use but is

not waterproof. Do not install it in places that

are prone to getting wet. When the amplifier

is not used, attach a cover or cap to prevent

water entering inside or the terminals getting

wet when they come into contact with water.

Do not install the amplifier in a location

exposed to direct sunlight or excessive heat,

humidity or dust.

Install the amplifier in a dry and well-venti-

lated environment, where other equipment

will not interfere with it.

When drilling holes in the chassis for instal-

lation, take precautions so as not to contact,

damage or obstruct pipes, fuel lines, tanks or

electrical wiring. Failure to take such precau-

tions may result in fire.

To ensure proper heat dissipation of the

amplifier, ensure the following during

installation:

—Allow adequate space above the amplifier

for proper ventilation.

—Do not mount the amplifier in the engine

compartment or in any areas of extreme heat.

—Do not cover the amplifier.

Slots and openings in the cabinet are pro-

vided for ventilation to ensure reliable oper-

ation of the product, and to protect it from

overheating. To prevent fire hazard, the open-

ings should never be blocked or covered with

items (such as papers, floor mat, cloths).

Please ask your dealer or relevant profession-

als to install/uninstall this product. Incorrect

installation can interfere with boat operation.

Keep small items such as bolts and screws

out of the reach of children. Swallowing can

cause serious injury. If swallowed, consult a

doctor immediately.

CAUTION

Always keep the volume low enough to hear

outside sounds.

Extended use of the headunit while the

engine is at rest or idling may exhaust the

battery.

The graphical symbol placed on the

product means this is an electronic product

requiring direct current electrical power.

About the protection function

This product has a protection function. If this

product detects something abnormal, the Power/

Protect indicator will turn red and the operation

of amplifier will be stopped:

—When the temperature inside the product

becomes high

—When speaker output detects abnormality

—When the supply voltage is out of

specification

Important (Serial number)

The serial number is located on the bottom of

this unit. Be sure to record this number on the

enclosed warranty card before installation.

Setting the unit

What’s what

Top side

134

5678

Top panel cover

Use the supplied wrench to remove the four

screws and detach the Top panel cover. Be

sure not to lose the removed screws.

To adjust the switch, use a flathead screw-

driver if needed.

Terminal side

1 INPUT SELECT switch

Select 2CH for two-channel input, 4CH for

four–channel input, or 6CH for six-channel

input.

2 Power/Protect indicator

The power indicator lights up blue to indi-

cate power ON.

If something is not normal, the indicator

turns red.

3 GAIN volume*

Adjusting gain volume CH A (channel

A), CH B (channel B), and CH C (channel

C) helps align the headunit output to the

Pioneer amplifier. Default setting is the

NOR (normal) position.

If the output remains low even when the

headunit volume is turned up, turn the

volume to a lower level (clockwise). If dis-

tortion occurs when the headunit volume is

turned up, turn these volumes to a higher

level (counterclockwise).

If using only one input plug, set the gain

volumes for speaker outputs A, B, and C

to the same position.

For use with an RCA equipped stereo

(standard output of 500 mV), set to the

NOR (normal) position. For use with an

RCA equipped Pioneer stereo with max-

imum output of 4 V or more, adjust level

to match that of the stereo output.

For use with an RCA equipped stereo

with output of 4 V, set to the H(High)

position.

4 +/%ÄKNVO@RRÄ×KSDQ'/%ÄGHFGO@RRÄ

×KSDQÄRDKDBSÄRVHSBG

Switch the settings based on the con-

nected speaker.

When the Subwoofer is connected:

Select LPF. This eliminates high range

frequency and outputs low range

frequency.

When the full range speaker is

connected:

Select HPF or OFF. HPF eliminates low

range frequency and output high range

frequency. OFF outputs the entire fre-

quency range.

5INPUT SENS switch

Select RCA for RCA level input signals or SP

for Speaker level input signals.

6 SPEAKER SETTING (output power

RVHSBG

Switch the output power according to the

connected speaker.

7 SPEAKER SETTING (output channel

RVHSBG

Switch the number of channels accord-

ing to the connected speaker. When the

Subwoofer is connected, select MONO,

when the full range speaker is connected,

select 2CH.

8 %1$0Ä'YÄBTSÄNEEÄEQDPTDMBXÄUNKTLD

Cut off frequency selectable from 50 Hz to

500 Hz if the LPF/HPF select switch is set to

LPF or HPF. For precise frequency informa-

tion , refer to

Precise Frequency Selection

Chart

* These controls are provided for Channels A,

B, and C, respectively.

Setting gain properly

Protective function included to avoid

malfunction of the unit and/or speakers

due to excessive output, improper use or

improper connection.

When outputting high volume sound etc.,

this function may cut off the output for a

few seconds as a normal function, Output

will be restored when the volume of the

headunit is turned down.

A cut in sound output may indicate

improper setting of the gain volume. To

ensure continuous sound output with the

headunit at a high volume, set the ampli-

fier gain volume to a level appropriate

for the preout maximum output level of

the headunit, so that volume can remain

unchanged and to avoid distortion caused

by signal waveform clipping at the amplifier

input.

Even with correct volume and gain set-

tings, the unit sound may cut out period-

ically. In such cases, please contact an

authorized Pioneer Service Company.

Gain volume of this unit

0.5 V (Maximum preout level=2 V)

Maximum preout level=4V

Above illustration shows NOR (normal) gain

setting.

1DK@SHNMRGHOÐADSVDDMÐ@LOKHÆDQÐF@HMÐ

and headunit output power

If amplifier gain is raised improperly, this will

simply increase distortion, with little increase

in power.

Signal waveform when outputting

@SÐGHFGÐUNKTLDÐTRHMFÐ@LOKHÆDQÐF@HMÐ

volume

If the signal waveform is distorted due to high

output, even if the amplifier gain is raised, the

output power will change only slightly.

Precise Frequency Selection

Chart

The numbers in the illustration correspond to

the Step Number.

No.1

No.9 No.13

No.17

No.21

No.5

Step Number Frequency (Hz)

150

256

363

471.5

580

690

7100

8113

9125

10 143

11 160

12 180

13 200

14 225

15 250

16 285

17 315

18 335

19 400

20 450

21 500

Connecting the units

Connection diagram

bcde

1Battery wire (sold separately)

The maximum length of the wire

between the fuse and the positive 

terminal of the battery is 30 cm (12 in.).

For the wire size, refer to

Connecting

the power terminal

. The battery wire,

the ground wire and the optional direct

ground wire must be same size. After

making all other connections at the

amplifier, connect the battery wire ter-

minal of the amplifier to the positive 

terminal of the battery.

2Fuse (80 A) (sold separately)

Each amplifier must be separately fused at 80 A.

3Positive terminal

4Negative () terminal

5Battery (sold separately)

6Ground wire, Terminal (sold separately)

The ground wires must be same size as the

battery wire.

7Headunit with RCA output jacks (sold

separately)

8External output

9Connecting wire with RCA pin plugs (sold

separately)

aFuse (40 A) × 2

bRCA input jack A

cRCA input jack B

dRCA input jack C

eSpeaker output terminals

Please see the following section for

speaker connection instructions. Refer to

Connections when using the speaker input

wire

fSystem remote control wire (sold

separately)

Note

INPUT SELECT switch must be set. For details,

see

Setting the unit

Before connecting the

@LOKHÆDQ

WARNING

Secure the wiring with cable clamps or adhe-

sive tape. To protect the wiring, wrap sections

in contact with metal parts in adhesive tape.

Never cut the insulation of the power supply

to feed power to other equipment. Current

capacity of the wire is limited.

CAUTION

If the system remote control wire of the

amplifier is connected to the power terminal

via the ignition switch (12 V DC), the amplifier

will remain on with the ignition whether the

headunit is on or off, which may exhaust

battery if the engine is at rest or idling.

Install and route the separately sold marine

grade battery wire, marine grade ground wire,

speaker wires and the amplifier as far away

as possible from the radio antenna, antenna

cable, tuner and any communications equip-

ment and wiring.

ANTSÐRTHS@AKDÐRODBHÆB@SHNMÐ

of speaker

Regarding the speaker to be connected to the

amplifier, use a speaker having a rated input

capacity more than the rated output capacity

of the amplifier. If this condition is not met,

there is a risk of fire, smoke, or damage. The

VSHDNHULPSHGDQFHLVWR

Speaker setting and I/O

Corresponding I/O for the number of input channels

Input: Two-channel / Output: Six-channel

Slide INPUT SELECT switch to 2CH position and connect wires with RCA pin plugs (sold sepa-

rately) to CH-A.

CH-A

CH-B

CH1 CH1

CH2

CH3

CH4

CH-C

CH5

CH6

CH2

CH3

CH4

CH5

CH6

INPUT OUTPUT

(L) (L)

(L)

(R) (R)

(R)

Input: Four-channel / Output: Six-channel

Slide INPUT SELECT switch to 4CH position and connect wires with RCA pin plugs (sold sepa-

rately) to CH-A and CH-B.

CH-A

CH-B

CH1 CH1

CH2

CH3

CH4

CH-C

CH5

CH6

CH2

CH3

CH4

CH5

CH6

INPUT OUTPUT

(L) (L)

(L)

Mixed CH1+CH3

(L)

(R) (R)

(R)

Mixed CH2+CH4

Input: Six-channel / Output: Six-channel

Slide INPUT SELECT switch to 6CH position and connect wires with RCA pin plugs (sold sepa-

rately) to CH-A, CH-B, and CH-C.

CH-A

CH-B

CH1 CH1

CH2

CH3

CH-C

CH5

CH6

CH2

CH3

CH4

CH5

CH6

CH4

INPUT OUTPUT

(L) (L)

(R) (R)

Example of speaker setting and speaker connection

Six channel output

CH-A

CH-B

CH-C

STEREO

(L)

(R)

Five channel output

CH-A

CH-B

CH-C

STEREO

MONO

STEREO

(L)

(R)

Four channel output

CH-A

CH-B

CH-C

STEREO

MONO

STEREO

(L)

(R)

Three channel output

CH-A

CH-B

CH-C

MONO

(L)

(R)

When in MONO connection, a monaural signal is output which is a mix of the left and right channel

signals.

Speaker setting and power output

SPEAKER SETTING

MONO 2CH

NOR

2 :-100W

4 :150 W 75 W

HIGH

2 :-100W

4 :200 W 100 W

Connections when using the

speaker input wire

Connect the headunit speaker output wires to

the amplifier using the supplied speaker input

wire with RCA pin cord.

Make sure to switch the INPUT SENS switch

to SP.

1Headunit

2Speaker output

3Red: Right 

4Black: Right 

5Black: Left 

6White: Left 

7Speaker input wire with RCA pin cord

to the RCA input jack of this unit

Notes

If speaker input wires from a headunit are

connected to this amplifier, the amplifier will

automatically turn on when the headunit is

turned on. When the headunit is turned off,

the amplifier turns off automatically. This

function may not work with some headunits.

In such cases, make sure that the front chan-

nel is connected correctly. If the function still

does not work, please use a system remote

control wire (sold separately). If multiple

amplifiers are to be connected together

synchronously, connect the headunit and all

amplifiers via the system remote control wire.

Solderless terminal

connections

Since the wire may become loose over time,

it must be periodically inspected and tight-

ened as necessary.

Do not solder or bind the ends of the

twisted wires.

Fasten while making sure to not to clamp

the insulating sheath of the wire.

Use the supplied hexagonal wrench to

tighten and loosen the terminal screw of the

amplifier and use it to securely fasten the

wire. Be careful to avoid excessive tighten-

ing of this screw, which may damage the

wire.

Connecting the power terminal

WARNING

If the battery wire is not securely fixed to the

terminal using the terminal screws, there is

a risk of overheating, malfunction and injury,

including burns.

Always use the recommended bat-

tery and ground wire, sold separately.

Connect the battery wire directly to the

boat battery positive () terminal and the

ground wire to the boat body.

Recommended wires size (AWG: American

Wire Gauge) is as follows. The battery wire,

the ground wire and the optional direct

ground wire must be same

size.

Use a wire of 12 AWG to 16 AWG wire for

the speaker wire.

When drilling a cable pass-thru into a bulk-

head or barrier wall, route the cable through

carefully and seal the hole to prevent fumes

from seeping from engine compartment to

other areas.

Ä Ä1NTSDÄA@SSDQXÄVHQDÄEQNLÄDMFHMDÄ

compartment to the boat interior.

After completing all other amplifier con-

nections, finally connect the battery wire

terminal of the amplifier to the positive 

battery terminal.

1Positive terminal

2Battery wire (sold separately)

The maximum length of the wire between the

fuse and the positive terminal of the bat-

tery is 30 cm (12 in.).

3Fuse (80 A) (sold separately)

Each amplifier must be separately fused at

80 A.

Ä Ä4RDÄVHQDÄBTSSDQRÄNQÄ@ÄTSHKHSXÄJMHEDÄSNÄ

RSQHOÄSGDÄDMCÄNEÄSGDÄA@SSDQXÄVHQDÄ

FQNTMCÄVHQDÄ@MCÄRXRSDLÄQDLNSDÄ

control wire to expose about 10 mm

ÄHMÄNEÄSGDÄDMCÄNEÄD@BGÄNEÄSGDÄVHQDRÄ

@MCÄSGDMÄSVHRSÄSGDÄDWONRDCÄDMCRÄNEÄSGDÄ

wires.

Twist

10 mm (3/8 in.)

3 Connect the wires to the terminal.

Fix the wires securely with the terminal

screws.

1Battery wire

2Power terminal

3Ground wire

4GND terminal

5System remote control wire

6System remote control terminal

7Terminal screws

Connecting the speaker output

terminals

Ä Ä4RDÄVHQDÄBTSSDQRÄNQÄ@ÄTSHKHSXÄJMHEDÄSNÄ

RSQHOÄSGDÄDMCÄNEÄSGDÄROD@JDQÄVHQDRÄSNÄ

DWONRDÄ@ANTSÄÄLLÄÄHMÄNEÄVHQDÄ

and then twist the wire.

Twist

10 mm (3/8 in.)

2 Connect the speaker wires to the

speaker output terminals.

Fix the wires securely with the terminal

screws.

1Terminal screws

2Speaker wires

3Speaker output terminals

Installation

!DENQDÐHMRS@KKHMFÐSGDÐ@LOKHÆDQ

WARNING

To ensure proper installation, use the supplied

parts in the manner specified. If any parts

other than those supplied are used, they may

damage internal parts of the amplifier or

become loose, causing the amplifier to shut

down.

Do not install in:

—Places where injury could occur if the boat

stops suddenly.

—Places where it may interfere with the

boat’s operation.

Ä SS@BGÄSGDÄSNOÄO@MDKÄBNUDQÄ@MCÄ!@CFD

Use the removed screws to attach the top

panel cover (fastening torque 0.6 to 0.8

N·m).

Remove the release paper and affix the

Badge in the orientation shown in the

following illustration.

1Screws

2Badge

3Top panel cover

Additional information

2ODBHÆB@SHNMR

Power source ...................... 14.4 V DC (10.8 V to 15.1 V

allowable)

Grounding system .............. Negative type

Current consumption......... 41 A (at continuous power,

4 : Normal mode)

56 A (at continuous power,

4 : High power mode)

Average current consumption

.......................................... 9.3 A (4 :for six channels,

Normal mode)

12.5 A (4 :for six channels,

High power mode)

14.5 A (2 :for six channels,

Normal mode)

16.7 A (2 :for six channels,

High power mode)

Fuse ..................................... 40 A × 2

Dimensions (W × H × D) ..

260 mm × 50.6 mm × 180 mm

(10-1/4 in. × 2 in. × 7-1/8 in.)

Weight ................................. 2.6 kg (5.7 lbs)

(Leads for wiring not

included)

Continuous power output.. 75 W × 6 (at 14.4 V, 4 :,

+]WRN+]7+'

Normal mode)

100 W × 6 (at 14.4 V, 2 :,

N+]7+'1RUPDO

mode)

150 W × 3 (at 14.4 V, 4 :,

0212N+]7+'

Install tapping screws in such a way that the

screw tip does not touch any wire. This is

important to prevent wires from being cut by

vibration of the boat, which can result in fire.

Make sure that wires do not get caught in

the sliding mechanism or touch the legs of a

person in the boat as short-circuit may result.

CAUTION

Place all cables away from hot places, such

as near the heater outlet.

The optimal installation location differs

depending on the boat model. Secure the

amplifier at a sufficiently rigid location.

Check all connections and systems before

final installation.

Example of installation on

the chassis

Ä Ä/K@BDÄSGDÄ@LOKH×DQÄHMÄSGDÄCDRHQDCÄ

installation location.

Insert the supplied tapping screws (4 mm

× 25 mm) into the screw holes and push

on the screws with a screwdriver so they

make an imprint where the installation

holes are to be located.

Ä Ä#QHKKÄÄLLÄÄHMÄCH@LDSDQÄGNKDRÄHMÄ

the chassis.

Ä Ä(MRS@KKÄSGDÄ@LOKH×DQÄVHSGÄSGDÄTRDÄNEÄ

RTOOKHDCÄS@OOHMFÄRBQDVRÄÄLLÄÐÄÄ

LL

1Tapping-screws (4 mm × 25 mm)

2Installation surface

3Hole-to-hole distance: 228.3 mm (9 in.)

4Hole-to-hole distance: 160.8 mm (6-11/32 in.)

5Hole-to-hole distance: 226 mm (8-29/32 in.)

Normal mode)

100 W × 6 (at 14.4 V, 4 :,

+]WRN+]7+'

High power mode)

100 W × 6 (at 14.4 V, 2 :,

N+]7+'+LJK

power mode)

200 W × 3 (at 14.4 V, 4 :,

0212N+]7+'

High power mode)

Load impedance ................. 4 :(2 :to 8 :allowable)

Frequency response............... 10 Hz to 50 kHz (+0 dB, –3 dB)

Signal-to-noise ratio ........... 95 dB (IHF-A network)

Distortion ............................ :N+]

Low pass filter:

Cut off frequency ........ 50 Hz to 500 Hz

Cut off slope................ –12 dB/oct

High pass filter:

Cut off frequency ........ 50 Hz to 500 Hz

Cut off slope................ –12 dB/oct

Gain control:

RCA.............................. 0.2 V to 6.5 V

Speaker........................ 0.8 V to 16 V

Maximum input level / impedance:

RCA.............................. 6.5 V / 25 k:

Speaker........................ 16 V / 12 k:

"3 Ä2ODBH×B@SHNMR

Power output....................... 75 W RMS × 6 Channels (at

14.4 V, 4 :,20 Hz to 20 kHz

DQG7+'11RUPDO

mode)

100 W RMS × 6 Channels

(at 14.4 V, 4 :,20 Hz to 20

N+]DQG7+'1

High power mode)

S/N ratio ............................... 75 dBA (reference: 1 W into

4 :)

Accessories

Speaker line input RCA cable × 3

Hexagonal wrench × 1

Mounting screw (4 × 25 mm) × 4

Logo Badge× 1

Fuse cover × 1

Cover for RCA Terminal × 6

Notes

Specifications and design are subject to mod-

ification without notice.

The average current consumption is nearly

the maximum current consumption by this

unit when an audio signal is input. Use this

value when working out total current con-

sumption by multiple power amplifiers.

<A1-000036-9L-A> UC

https://www.pioneerelectronics.com/PUSA/

https://www.pioneerelectronics.ca/POCEN/

PIONEER CORPORATION

28-8, Honkomagome 2-chome, Bunkyo-ku,

Tokyo 113-0021, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

2 Jalan Kilang Barat, #07-01, Singapore 159346

TEL: 65-6378-7888

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

5 Arco Lane, Heatherton, Victoria, 3202 Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS DE MÉXICO S.A. DE C.V.

Blvd.Manuel Ávila Camacho 138, 10 piso

Col.Lomas de Chapultepec, México, D.F. 11000

TEL: 52-55-9178-4270

FAX: 52-55-5202-3714

ӒᎣ޷ӌԥϵѨ

ѯіҀϲ෺ୣ࿆ӏၰĵıĸဵĹዃ

ႬၘȈ ĹĹķĮĩıĪĳĮĳķĶĸĮĴĶĹĹ

ӒᎣႬφȞ෬ȟԥϵѨ

෬ΟᓹߞؔᢋၿĺıĺဵĶዃ

PIONEER

ELECTRONICS (USA) INC.

LIMITED WARRANTY

WARRANTY VALID ONLY

COUNTRY

PRODUCT PURCHASE

WARRANTY

Pioneer Electronics (USA) Inc. (Pioneer) warrants that Pioneer® Car Electronics, Speaker, and Accessory Products distributed by Pioneer

the U.S.A. and

Canada thatfail to function properly under normal use due to a manufacturing defect when installed and operated according to the owner's manual enclosed

with the unitwill be repaired orreplaced with a unit

comparable value, atPioneer's option,without charge to you for parts oractual repairwork. Replacement

unitsand/orpartssupplied underthiswarranty may be neworrebuiltatPioneer'soption.

This LimitedWarrantyapplies to the original or

any

subsequent

owner

this Pioneerproductduring thewarranty period providedthe productwas

purchased from anauthorized Pioneerdealerin the U.S.A.

Canada.You will be required to provide a sales receipt

othervalid proof

purchase

showing the date

original purchase. In the event service is required, the product must be delivered within the warranty period, transportation

prepaid, onlyfrom within the country

purchaseasexplained in thisdocument.You will be responsible

for

removal and installation

the product.

Pioneerwill payto return the repaired

replacement

productto

you withinthecountry

purchase.

PRODUCT WARRANTY PERIOD

(Runs

from

the

date

first

retail sale)

fs!..!ll.

Car

Electronics

, Speakers,

and

Accessories

...........

........

...

.....................................................

..................

............................... 1 Year 1 Year

WHAT

NOT COVERED

This

Limited

Warranty

applies

Pioneer

products

that

are

purchased

from

authorized

Pioneer

dealer. IF THIS PRODUCT WAS PURCHASED

FROM

ANY

OTHERSOURCE, THEREARENOWARRANTIES, EXPRESS ORIMPLIED,INCLUDINGTHE IMPLIEDWARRANTYOF MERCHANTABILITY

AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND THIS PRODUCT IS SOLD STRICTLY

"AS

IS"

AND "WITH

ALL

FAULTS". PIONEER

SHALL

NOTBE LIABLE FOR

ANY

CONSEQUENTIALAND/OR INCIDENTALDAMAGES.

Some

states

and

provinces

not

allow

the

exclusion

limitation

incidental

consequential

damages,

theabove

limitation

exclusion

may

not

apply

you.

Pioneer

does

not

warrant

any

product

listed

above

when

used in atrade

business

any

industrial

commercial

application.

This

warranty

does

not

apply

the

product

hasbeen

subjected

power

inexcess

its

published

power

rating.

This

warranty

does

not

cover

cosmetic

scratches

any

other

appearance item; damage

defects

resulting

from

alterations

modifications

not

authorized

writing

Pioneer; accident,

collisions,

misuse

abuse; theuse

unauthorized

parts

labor;

improper

installation

maintenance;

lightning

power

surges;

subsequent

damage

from

leaking; damage

from

inoperative

batteries;

the use

batteries

not

conforming

those

specified

the

owner's

manual.

This

warranty

does

not

cover

the

cost

parts

labor

that

would

otherwise

provided

without

charge

under

this

warranty

obtained

from

any

source

other

than

Pioneer.

Altered,defaced,

removedserial

numbers

void

this

warranty.

NO OTHER WARRANTIES

TOTHE FULLESTEXTENTPERMITTEDBYLAW, PIONEERMAKES

REPRESENTATIONS

WARRANTIES

ACCEPTS

ANY

CONDITIONSWITH

RESPECT TO THIS PRODUCT EXCEPTAS STATED IN THIS DOCUMENT. PIONEER LIMITS ITS OBLIGATIONS UNDER

ANY

IMPLIED WARRANTIES

AND CONDITIONS INCLUDING, BUT

NOT

LIMITED TO, WARRANTIESAND CONDITIONS,

WHETHER

EXPRESS

IMPLIED, OF MERCHANTABILITY

AND FITNESS

FORA

PARTICULARPURPOSE, TOA PERIOD

NOT

TO EXCEEDTHE WARRANTYPERIOD.

WARRANTIES

CONDITIONSSHALL

APPLYAFTER THE WARRANTY PERIOD. Some states and provinces do not allow limitations on how long an implied warranty lasts, so the above

limitationsorexclusions maynotapplytoyou.

This warranty gives you specific legal rights, and you mayalso have otherrights which varyfrom state

state orprovince to province. To the extent

anyprovision

this limitedwarrantyis deemedinvalid

unenforceableunderapplicablelaw, suchdeterminationwill haveno effecton the remaining

provisions,whichwill continuein full force andeffect.

TO OBTAIN SERVICE

the U.S.A. or Canada, to receive warranty service, you need to present your sales receipt showing place and date

original owner's transaction.

Please contact

one

the following

obtain service:

Your Authorized Pioneer Dealer -Your Pioneer Dealer may repair or replace your unit or refer you to

Authorized Pioneer Service Company.Your sales

receipt should list the contact information (phone number, fax, email, etc.) for your Dealer.

Pioneer Customer Support -Can advise the optimal service option for your model and geographic location. Please call us at 1-800-421-1404 or visit

www.pioneerelectronics.com (for USA) or http://www.pioneerelectronics.ca (for Canada), click on "Support," then select "Contact Us."

Your Authorized Pioneer Service Company -Can perform repairs for most Car Electronics, Speaker and Accessory products and advise other options as

applicable. Please visit Pioneer's website, click

"Support," and select "Find a Service Center."

Shipping Your Unit

for

Service -YOU MUST FIRST CONTACT PIONEER TO GET RETURN AUTHORIZATION. PLEASE DO NOT SEND

YOUR

PRODUCT WITHOUT CONTACTING CUSTOMER SUPPORT. If you have a return authorization number, please package the product carefully and

send it transportation prepaid by a traceable, insured method to

Authorized Pioneer Service Company or Pioneer. Use adequate padding material to

prevent damage in transi

Include your name, address and a telephone number where you can be reached during business hours.

For questions about your product, please contact Pioneer Customer Support as described above or write to us at:

DISPUTE RESOLUTION

Customer Support

Pioneer Electronics (USA) Inc.

P.O.

Box 1720

Long Beach, California 90801 U.S.A.

Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint

Resolution Program to resolve the dispute.The Complaint Resolution Program

available to you without charge.

the U.S.A., you are required to use the

Complaint Resolution Program before you exercise any rights under,

seekany remedies, created bythe Magnuson-Moss WarrantyActbut may be entitled

tofile suit understate lawwithoutusing the Complaint Resolution Program.

use the Complaint Resolution Program, call 1-800-421-1404and explain to the

customerservicerepresentativethe problem you are experiencing, stepsyou havetaken to havethe productrepaired duringthewarrantyperiod,andthe name

the authorized Pioneer Dealerfrom which the Pioneer product was purchased.After the complaint has been explained to the representative, a resolution

numberwill be issued.Within forty (40) days

receiving your complaint, Pioneer will investigate the dispute and will either: (1) respond to your complaint

writing informing you whataction Pioneerwill take,and

whattime period, to resolve the dispute;or(2) respond to yourcomplaintin writing informing you why

Pioneerwill nottakeanyaction.

RECORD THE PLACE AND DATE OF PURCHASE. KEEP THIS INFORMATION AND YOUR SALES RECEIPT

A SAFE PLACE

Model No.

_______________

Serial No.

_____________

_ _ PurchaseDate

__________

Purchased From

_______________

_______

______________

_ _

____

UCC0119 <CYR1240-A>

PIONEER ELECTRONICS (USA) INC.

GARANTIE LIMITEE

GARANTIE VALIDE UNIQUEMENT DANS LE PAYS D'ACHAT DU PRODUIT

GARANTIE

Pioneer Electronics (USA) Inc. (ci-apres «Pioneer ») garantit que les appareils electroniques, haut-parleurs et produis accessoires automobiles Pioneer®

distribues par Pioneer aux Etats-Unis et

Canada, s'ils sont installes et utilises conformement

manuel de l'utilisateur qui accompagne l'appare

et ne

fonctionnent pas correctement dans des conditions normales d'utilisation en raison d'un defaut de fabrication, seront repares ou remplaces par un appareil

devaleurcomparable, ala discretion de Pioneer,sans frais de pieces ou de reparation. Les appareils de remplacementet/ou piecesfournies en vertu de cette

garantiepeuventetre neufs

remisaneuf, a

discretiondePioneer.

Cette garantie limitee s;applique au proprietaire initial ou atout proprietc!ire ulterieur de ce produit Pioneer pendant la periode de garantie, sous

reserve que le produit ait ete achete d'un detaillant Pioneerautorise aux Etats-Unis ou au Canada. Vous devrezfournir un re~u de caisse ou autre

preuved'achatvalideindiquantla datedel'achatinitial. Si une reparation s'averenecessaire, le produitdoitetreexpedie dans laperiodedegarantie,

frais de port prepayes, uniquementdepuis le pays de l'achat, ettel qu'explique dans le present document. Vous serez responsable du retrait et de

!'installationdu produit. Pioneerpaiera lesfraisderetourdu produitrepareou de remplacement,al'interieurdupaysd'achat.

PERIODE

GARAN.TIE

PRODUIT (La garantie prend effet acompter de la premiere vente au detail)

Main-d

c;euvre

Appareils

electroniques, haut-parleurs

produits

accessoires

automobiles

....

.......

...

....

..........

.....

........

...

......

............. 1 an 1 an

ELEMENTS NON COUVERTS PAR

GARANTIE

Cettegarantielimitees'appliqueauxproduitsPioneerachetesd'undetaillantPioneerautorise.

PRODUITAETEACHETE

TOUTEAUTRESOURCE,

IL N'YA

PAS

GARANTIES, EXPLICITES

IMPLICITES, Y COMPRIS LES GARANTIES IMPLICITES

QUALITE MARCHAN

ET GARANTIES

IMPLICITES D'ADAPTATION A

USAGE PARTICULIER,

PRODUIT EST

VENDU

«TEL QUEL

»ET«

AVEC

TOUS

SES DEFAUTS

».

PIONEER

SERARESPONSABLE

AUCUN DOMMAGE CONSECUTIF

ET/OU

ACCESSOIRE. Certains Etatset certaines provinces n'autorisentpas !'exclusion ou la

limitationdesdommagesconsecutifsou indirects, parconsequent, la limitationou !'exclusion indiqueeplushautpeutne pas s'appliqueravous.

Pioneer

garantit

aucun

des

produits

enumeres

ci-dessus

ils

sont

utilises

des

fins

commerciales

professionnelles,

dans

toute

application

industrielle

commerciale.

Cette

garantie

s'applique

pas

produit

a ete

soumis

aune

puissance

nominale

excedant

celle

indiquee

dans

les

documents

s'y

appliquant.

Cette

garantie

couvre

pas

les

rayures

tout

autre

element

esthetique

;

les

dommages

defectuosites

resultant

retouches

modifications

non

autorisees

par

ecrit

par

Pioneer

; les

accidents,

collisions,

usages

inappropries

abusifs;

!'utilisation

non

autoriseedepiecesou demain-d'ceuvre;

!'installation

oula

maintenance

inadequate;

les

dommages

causes

par

foudre

ou la

surtension

; les

dommages

decoulant

fuites

; les

dommages

decoulant

piles

defectueuses

; ou

!'utilisation

de piles

non

conformes

acelles specifiees

dans

le manuel de l'utilisateur. Cette garantie ne

couvre

pas le

coot

des

pieces ou

la main-d'ceuvre

qui

seraient

autrement

offertes

sans

frais

en vertu de la presente garantie, si elles

sont

obtenues

pres

d'une

source

autre

que

Pioneer. Les

numeros

de serie

modifies

obliteres

ouenleves

annulent

cettegarantie.

INVALIDITE DE TOUTES AUTRES GARANTIES

DANS TOUTE LA MESUREAUTORISEE PAR LALOI, SAUF DISPOSITION CONTRAIRE DANS LE PRESENT DOCUMENT, PIONEER NE FAITAUCUNE

REPRESENTATION ET N'OFFRE AUCUNE GARANTIE, NI N'ACCEPTE AUCUNE CONDITION CONCERNANT CE PRODUIT. PIONEER LIMITE SES

OBLIGATIONS EN VERTU DE

TOUTES

GARANTIES ET CONDITIONS IMPLICITES, Y COMPRIS, MAIS

SANS

S'Y

LIMITER LES GARANTIES ET

CONDITIONS, EXPRESSES OU IMPLICITES, DE COMMERCIALITE ET D'ADAPTATION A UN USAGE PARTICULIER,

AUNE

PERIODE N'EXCEDANT

PAS LA PERIODE DE GARANTIE. AUCUNE GARANTIE OU CONDITION NE S'APPLIQUERAAPRES LA PERIODE DE GARANTIE. Certains etats et

certaines provinces n'autorisent pas les limitations sur la duree d'une garantie implicite. Parconsequent, ii se pourrait que certaines des limitations

ou exclusionsprecitees ne s'appliquentpasavous.

Cette garantie vous confere des droits specifiques legaux, mais vous pouvez beneficier d'autres droits qui peuvent varier selon les Etats ou les

provinces. Dans

mesureou toute disposition de cette garantie limitee estconsideree comme invalide ou inexecutable en vertu du droitapplicable,

elle serasanseffetsurles autres dispositions, qui resterontpleinementenvigueur.

DEMANDE DE SERVICE

Aux Etats-Unis et

Canada, pour recevoir

service

garantie vous devez presenter votre

re9u

caisse indiquant

lieu et

date

transaction d'o

gin

Pour toute demande de service, veuillez contacter :

Votre detaillant Pioneer autorise -Votre detaillant Pioneer peut reparer ou remplacer votre appareil ou vous mettre en contact avec une entreprise de

services Pioneer autorisee. Vous devriez trouver les coordonnees (numero de telephone, numero de telecopieur, adresse de courriel, etc.) de votre

detaillant sur votre re9u de caisse.

Support a

clientele Pioneer -peut vous conseiller sur le choix de l'option de service optimal pour votre modele et votre region geographique. Appelez-

nous au 1-800-421-1404 ou visitez notre site Web awww.pioneerelectronics.com (pour les Etats-Unis) ou http://www.pioneerelectronics.ca (pour le

Canada), cliquez sur « Soutien », puis selectionnez « Contactez-nous ».

Votre entreprise de services Pioneer autorisee -peut effectuer des reparations pour

plupart des produits electroniques automobiles, des haut-parleurs

et des produits accessoires et peut vous conseiller sur le choix d'autres options, selon le cas. Visitez le site Web de Pioneer, cliquez sur « Soutien »,

puis selectionnez « Trouver un Centre de service ».

Expedition de votre appareil aux fins de service -VOUS DEVEZ D'ABORD CONTACTER PIONEER POUR OBTENIR UNE AUTORISATION DE

RETOUR. VEUILLEZ NE PAS ENVOYER VOTRE PRODUIT SANS AVOIR D'ABORD CONTACTE LE SERVICE A LA CLIENTELE.

vous avez un

numero d'autorisation de retour, veuillez emballer le produit soigneusement et l'envoyer, frais de port prepayes avec un service d'expedition tra9able et

assurable, aune societe de services Pioneer autorisee ou aPioneer. Utilisez des materiaux d'emballage coussines adequats pour eviter les dommages

pendant le transport. lncluez votre nom, votre adresse et un numero de telephone ou nous pouvons vous joindre pendant les heures de bureau.

Pour toute question concernant votre produit, veuillez contacter le soutien ala clientele Pioneer comme decrit ci-dessus ou ecrivez-nous a:

Customer Support, Pioneer Electronics (USA) Inc.,

P.O.

Box 1720, Long Beach, California 90801 U.S.A.

REGLEMENT DES CONFLITS

Dans

cas d'un conflit entre vous et Pioneer apres notre reponse avotre demande initiale adressee service a

clientele (Customer Support), Pioneer

met avotre disposition son Programme de resolution des plaintes pour resoudre

conflit.

Programme de resolution des plaintes est disponible sans

frais. Aux Etats-Unis, vous etes tenu de recourir au Programme de reglement des plaintes avant d'exercer vos droits ou d'exiger reparation en vertu de

loi sur

garantie « Magnuson-Moss Warranty Act », mais vous etes en droit d'engager une action en justice en vertu des lois de l'Etat sans passer

par le Programme de resolution des plaintes. Pour avoir recours au Programme de resolution des plaintes, composez le 1-800-421-1404 et decrivez au

representant du service ala clientele le probleme que vous rencontrez et les demarches que vous avez entreprises pour faire reparer le produit pendant

periode de garantie, et donnez-lui le nom du detaillant Pioneer autorise aupres duquel vous vous etes procure le produit Pioneer. Une fois que votre

plainte a ete expliquee

representant, un numero de resolution vous sera communique. Pioneer etudiera le conflit et, dans un delai de quarante (40)

jours apres

reception de votre plainte, (1) repondra a votre plainte par ecrit pour vous aviser des demarches qu'elle entreprendra pour resoudre

conflit, et indiquera combien de temps ces demarches prendront ; ou (2) repondra avotre plainte par ecrit pour vous indiquer les raisons pour lesquelles

Pioneer n'entreprendra aucune demarche.