Pioneer CA-HM-KIA.016 User manual

KIA
Compatible with double DIN devices
Double DIN Kit contents Facia Plate
Mounting Brackets + 4 screws
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
11/2013 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
RIO 2015 ->
Cap + 2 screws
CA-HM-KIA.016
Place the clips saved before
on the facia plate supplied,
mount the air vents.
If the car is equipped with
Start and Stop engine, mount
the button into the
appropriate hole, otherwise
install the cap with the two
supplied screws.
The image shows the final
result.

All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
Remove the original panel,
unmount the air vents;
If the car is equipped with
Start and Stop engine,
unmount the button.
Take the left and right bracket
and mount them on the
aftermarket radio each with
the 2 supplied screws .
Connect all cables, verify the
proper functioning of the
system and insert the radio
unit into the housing. Fix it
with screws saved before, as
shown in the picture.
Installation Manual Double DIN Kit
Unscrew and save the 4
screws of the original radio as
shown in the picture.
Remove and save the clips
from the original panel as
shown in the picture.
Before insert the radio pull
down the internal bracket of
the radio tunnel as shown in
the picture.