Pioneer AVIC-D1 User manual

Hardware Manual
DOUBLE-DIN DVD NAVIGATION SYSTEM
AVIC-D1
ENGLISH

1
Introduction
Manual Overview
This manual mainly describes hardware-related
information such as the part names of the Navi-
gation System or precautions for use. Please
read this manual and all other enclosed manuals
before using your Navigation System. The follow-
ing issues are described in each chapter:
How to use this manual
Terminology
Before moving on, take a few minutes to read the
following information about the conventions
used in this manual. Familiarity with these con-
ventions will help you greatly as you learn how to
use your new equipment.
•Buttons on your Navigation Unit are described
in ALL CAPITAL, BOLD lettering:
e.g.)
MAP button, DEST button.
• Items in the different menus or touch keys
available on the screen are described in quota-
tions (“ ”) and bold:
e.g.)
“Destination”, “Settings”.
• Extra information, alternative use and other
notes are presented like this:
e.g.)
❒When the source icon is not displayed, you
can display it by touching the screen.
• The references are indicated like this:
e.g.)
➲For suitable discs ➞ Page 6
Display Definition
From here on after, the screen that is attached to
the body of the product will be referred to as the
“Front Display”. Any additional optional screen
that is purchased for use in conjunction with this
product will be referred to as the “Rear Display”.
Introduction
This chapter describes precautions for the use of
the Navigation System.
How to Use Navigation Unit and
Names of the Parts
This chapter describes matters that are important
to know before using the Navigation System,
such as the names of each part, and how to insert
or eject discs.
Appendix
This section describes how to handle the Naviga-
tion System or discs and the specifications of the
Navigation System.

2
Table of Contents
Introduction 1
Manual Overview 1
How to use this manual 1
Terminology 1
Table of Contents 2
Important Safety Information 3
Notes Before Using the System and Additional
Safety Information 4
Precaution 4
After-sales service for Pioneer products 6
Product registration 6
Upgrade DVD Map Disc 6
Playable discs 6
Features (Characteristics of this hardware) 6
About the WMA Logo 7
About the SAT RADIO READY Logo 7
About the XM NAVTRAFFIC Logo 8
To Protect the LCD Screen 8
For Viewing LCD Comfortably 8
Resetting the Microprocessor 8
Chapter 1
How to Use Navigation Unit and
Names of the Parts 11
Navigation Unit 11
Turning the Unit On and Selecting a Source 13
Adjusting the Volume 13
Turning the Source Off 13
Inserting/Ejecting a Disc 14
Inserting a CD 14
Ejecting a CD 14
Inserting the DVD Map Disc 15
Ejecting the DVD Map Disc 15
Adjusting the LCD Panel Angle 15
Appendix 17
Troubleshooting 17
Handling and Care of the Disc 18
DVD Map Discs 18
DVD-ROM drive/CD drive and care 18
CD-R/CD-RW discs 18
MP3, WMA and WAV files 19
MP3 additional information 19
WMA additional information 19
WAV additional information 20
About folders and MP3/WMA/WAV files 20
Ambient conditions for playing disc 21
Using the Navigation System Correctly 21
Handling the LCD panel 21
Liquid crystal display (LCD) screen 21
Keeping the LCD screen in good condition 22
Small fluorescent tube 22
Glossary 22
Specifications 23

3
Important Safety Information
Before using your Navigation System, be sure to
read and fully understand the following safetyin-
formation:
❒Read the entire manual before operating this
Navigation System.
❒The navigation features of this unit (and rear
view camera option if purchased) is intended
solely as an aid to you in the operation of your
vehicle. It is not a substitute for your attentive-
ness, judgment, and care when driving.
❒Do not operate this Navigation System (or the
rear view camera option if purchased) if doing
so in any way will divert your attention from
the safe operation of your vehicle. Always
observe safe driving rules and follow all exist-
ing traffic regulations. If you experience diffi-
culty in operating the system of reading the
display, park your vehicle in a safe location
and apply the parking brake before making
the necessary adjustments.
❒Never allow others to use the system unless
they have read and understood the operating
instructions.
❒Never use this Navigation System to route to
hospitals, police stations, or similar facilities
in an emergency. Please call 911.
❒Route and guidance information displayed by
this equipment is for reference purposes only.
It may not accurately reflect the latest permis-
sible routes, road conditions, one way streets,
road closures, or traffic restrictions.
❒Traffic restrictions and advisories currently in
force should always take precedence over
guidance given by the Navigation System.
Always obey current traffic restrictions, even if
the Navigation System provides contrary
advice.
❒Failure to input correct information about the
local time may result in the Navigation Sys-
tem providing improper routing and guidance
instructions.
❒Never set the volume of your Navigation Sys-
tem so high that you cannot hear outside traf-
fic and emergency vehicles.
❒To promote safety, certain functions are disa-
bled unless the vehicle is stopped and/or the
parking brake is applied.
❒The data encoded in the disc is the intellec-
tual property of the provider, and the provider
is responsible for such content.
❒Keep this manual handy as a reference for
operating procedures and safety information.
❒Pay close attention to all warnings in this
manual and follow the instructions carefully.
❒Do not install the Navigation System where it
may (i) obstruct the driver’s vision, (ii) impair
the performance of any of the vehicle’s operat-
ing systems or safety features, including air
bags, hazard lamp buttons or (iii) impair the
driver’s ability to safely operate the vehicle.
❒Please remember to wear your seat belt at all
times while operating your vehicle. If you are
ever in an accident, your injuries can be con-
siderably more severe if your seat belt is not
properly buckled.
❒Using the most current DVD Map Disc will
allow for most accurate destination mapping.
Upgrade DVD Map Discs are available for pur-
chase through your local Pioneer dealer.
❒Never use headphones while driving.
❒Do not attempt to install or service your Navi-
gation System by yourself. Installation or serv-
icing of the Navigation System by persons
without training and experience in electronic
equipment and automotive accessories may
be dangerous and could expose you to the
risk of electric shock or other hazards.

4
Notes Before Using the System
and Additional Safety Informa-
tion
For Canadian model
Important (Serial Number:)
The serial number of this device is located on the
bottom of this product. For your own security and
convenience, be sure to record this number on
the enclosed warranty card.
Precaution
• THE LIGHT GREEN LEAD AT POWER
CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CON-
NECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH.
IMPROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS
INJURY OR DAMAGE.
• Never set the volume of your Navigation Sys-
tem so high that you cannot hear outside traf-
fic and emergency vehicles.
• Protect this product from moisture.
• If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
•Handling the cord on this product or cords
associated with accessories sold with the
product may expose you to chemicals
listed on proposition 65 known to the
State of California and other governmen-
tal entities to cause cancer and birth
defects or other reproductive harm. Wash
hands after handling.
• This product contains mercury. Disposal
of this material may be regulated due to
environmental considerations. For dis-
posal or recycling information, please con-
tact your local authorities or the
Electronics Industries Alliance:
www.eiae.org.
•Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and
overheating could result from contact with
liquids.
Parking brake interlock
Certain functions offered by this Navigation Sys-
tem could be dangerous if used while driving. To
prevent them being used while in motion, there is
an interlock with your vehicle’s parking brake. If
you attempt to use these functions during driv-
ing, they may be inoperable. If so, stop in a safe
place, apply the parking brake, then operate.
See “Parking brake interlock” in the Operation
Manual for more information.
Information to User
Alteration or modifications carried out with-
out appropriate authorization may invalidate
the user’s right to operate the equipment.
This Class B digital apparatus complies with
Canadian ICES-003.
CAUTION: USE OF CONTROL OR ADJUST-
MENT OR PERFORMANCE OF
PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIA-
TION EXPOSURE.
CAUTION: THE USE OF OPTICAL INSTRU-
MENTS WITH THIS PRODUCT
WILL INCREASE EYE HAZARD.

5
To ensure safe driving
• To avoid the risk of accident and the
potential violation of applicable laws, this
unit should never be used while the vehi-
cle is being driven except for Navigation
purposes. Also, Rear Displays should not
be in a location where it is a visible dis-
traction to the driver.
• In some countries or states the viewing of
images on a display inside a vehicle even
by persons other than the driver may be
illegal. Where such regulations apply, they
must be obeyed and this unit’s visual
image features should not be used.
• “Visual image” in this manual indicates the
moving image from the equipments which are
connected to this product with AV-BUS or RCA
cable, such as DVD player and TV tuner.
This unit detects whether your vehicle’s parking
brake is engaged or not, and prevents you from
watching visual images on the front display while
driving. When you attempt to watch visual
images, the warning Viewing of front seat
video source while driving is strictly prohib-
ited. will appear on the front display.
To watch visual images on the front display, park
your vehicle in a safe place and apply the parking
brake.
See “Parking brake interlock” in the Opera-
tion Manual for more information.
When using a display connected to
REAR MONITOR OUTPUT
This unit’s REAR MONITOR OUTPUT is for
connection of a display to enable passengers in
the rear seats to watch visual images.
❒The map screen navigation images output to
the rear display differs from standard NTSC
format images. Therefore, the quality will be
inferior to the images that appear on the front
display.
• NEVER install the rear display in a loca-
tion that enables the driver to watch visual
images while driving.
To avoid battery exhaustion
Be sure to run the vehicle engine while using this
unit. Using this unit without running the engine
can result in battery drainage.
• Do not use with vehicles that do not fea-
ture an ACC position.
About rear view camera
With an optional rear view camera (sold sepa-
rately) you are able to use the Navigation System
as an aid to keep an eye on trailers, or while back-
ing up.
• SCREEN IMAGE MAY APPEAR
REVERSED.
• USE INPUT ONLY FOR REVERSE OR
MIRROR IMAGE REAR VIEW CAMERA.
OTHER USE MAY RESULT IN INJURY
OR DAMAGE.
• The rear view camera function is to be
used as an aid to keep an eye on trailers, or
while backing up. Do not use for entertain-
ment purposes.
•Please note that the edges of the rear view
camera images may differ slightly accord-
ing to whether full screen images are dis-
played when backing up, and whether the
images are used for checking the rear
when the vehicle is moving forward.

6
Product registration
Visit us at the following site:
1. Register your product. We will keep the details
of your purchase on file to help you refer to this
information in the event of an insurance claim
such as loss or theft.
2. Receive updates on the latest products and
technologies.
3. Download owner’s manuals, order product cat-
alogues, research new products, and much
more.
4. Receive notices of software upgrades and soft-
ware updates.
Upgrade DVD Map Disc
Upgrade DVD Map Disc are available for pur-
chase from your local Pioneer dealer. These
include the most current map and point of inter-
est information. Contact your local Pioneer
dealer for details.
Playable discs
About CD
CD discs that display the logos shown below gen-
erally can be played back on this built-in CD
drive.
CD
❒This CD drive may not be able to play all discs
bearing the marks shown above.
About DVD Map Disc
You can use discs intended for this Navigation
System. Use only discs approved by Pioneer.
➲For details on other discs ➞Page 18
Features (Characteristics of this
hardware)
Touch panel key operation
It is possible to operate this unit by using touch
panel keys.
Built-in Navigation system
You can use DVD Map Discs that are compatible
with this system.
CD playback
Music CD/CD-R/CD-RW playback is possible.
➲“Handling and Care of the Disc” ➞ Page 18
➲“Playable discs” ➞ Page 6
MP3 file playback
It is possible to play back MP3 files recorded on
CD-ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
• Supply of this Navigation System only conveys
a license for private, non-commercial use and
does not convey a license nor imply any right
to use this product in any commercial (i.e. rev-
enue-generating) real time broadcasting (ter-
restrial, satellite, cable and/or any other
media), broadcasting/streaming via internet,
After-sales service for Pioneer
products
Please contact the dealer or distributor from
which you purchased the product for after-sales
service (including warranty conditions) or any
other information. In case the necessary infor-
mation is not available, please contact the com-
panies listed below.
Please do not ship your product to the compa-
nies at the addresses listed below for repair with-
out making advance contact.
For warranty information, please see the Limited
Warranty sheet included with your product.
U.S.A
Pioneer Electronics
(USA) Inc.
CUSTOMER
SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA
90801-1760
800 421-1404
CANADA
Pioneer Electronics of
Canada, Inc.
CUSTOMER
SATISFACTION
DEPARTMENT
300 Allstate Parkway
Markham, Ontario
L3R OP2
1-877-283-5901

7
intranets and/or other networks or in other
electronic content distribution systems, such
as pay-audio or audio-on-demand applications.
An independent license for such use is
required. For details, please visit
http://www.mp3licensing.com.
WMA file playback
• You can play back WMA files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
WAV file playback
• You can play back WAV files recorded on CD-
ROM/CD-R/CD-RW (Linear PCM (LPCM)/MS
ADPCM recordings).
NTSC compatibility
This unit is NTSC system compatible. When con-
necting other components to this unit, be sure
components are compatible with the same video
system or else images will not be correctly repro-
duced.
Rear view camera ready
You can display what is behind the vehicle if con-
nected to a rear view camera (sold separately).
➲“About rear view camera” ➞ Page 5
About the WMA Logo
The Windows MediaTM logo printed on the box
indicates that this unit can play back WMA data.
WMA is short for Windows Media Audio and
refers to an audio compression technology that is
developed by Microsoft Corporation. WMA data
can be encoded by using Windows Media Player
version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks of
Microsoft Corporation in the United States and/or
other countries.
Notes:
• With some applications used to encode WMA
files, this unit may not operate correctly.
• Depending on the version of Windows Media
Player used to encode WMA files, album
names and other text information may not be
correctly displayed.
About the SAT RADIO READY
Logo
The SAT RADIO READY logo printed below the
CD loading slot indicates that the Satellite Radio
Tuner for Pioneer (i. e., XM tuner and Sirius satel-
lite tuner which are sold separately) can be con-
trolled by this unit. Please inquire with your
dealer or nearest authorized Pioneer service sta-
tion regarding the satellite radio tuner that can
be connected to this unit. For satellite radio tuner
operation, please refer to the Operation Manuals
of the Navigation System and Satellite Radio
Tuner.
Note:
The system will use direct satellite-to-receiver
broadcasting technology to provide listeners in
their cars and at home with crystal-clear sound
seamlessly from coast to coast. Satellite radio
will create and package over 100 channels of dig-
ital-quality music, news, sports, talk and chil-
dren’s programming.
“SAT Radio”, the SAT Radio logo and all related
marks are trademarks of Sirius Satellite Radio
inc., and XM Satellite Radio Inc.

8
About the XM NAVTRAFFIC
Logo
Required $12.95 basic monthly XM radio sub-
scription and XM NavTraffic service subscrip-
tions sold separately. XM NavTraffic only
available in select markets. Premium Channels
for radio service available at additional monthly
costs. Other fees and taxes, including a one-time
activation fee, may apply. Subscription fee is con-
sumer only. All fees and programming subject to
change. Subscriptions subject to Customer
Agreement available at xmradio.com. XM radio
service only available in the 48 contiguous United
States.
© 2004 XM Satellite Radio Inc. All rights
reserved.
NAVTEQ Traffic- is a trademark of NAVTEQ North
America, LLC.-2004. NAVTEQ North America,
LLC.
To Protect the LCD Screen
❒Do not allow direct sunlight to fall on the dis-
play when this unit is not being used.
Extended exposure to direct sunlight can
result in LCD screen malfunction due to the
resulting high temperatures.
❒When using a portable phone, keep the
antenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes, etc.
❒Never touch the screen with anything besides
your finger when operating the Touch Panel
functions. The screen can scratch easily.
For Viewing LCD Comfortably
Due to its construction, the view angle of the LCD
screen is limited. The viewing angle can be
increased, however, by using BRIGHTNESS to
adjust the black density of the video. When using
for the first time, adjust the black density in
accordance with the viewing angle to adjust for
clear viewing. DIMMER can also be used to
adjust the brightness of the LCD screen itself to
suit your personal preference.
Resetting the Microprocessor
• Pressing the RESET button deletes the
contents of the Navigation System’s mem-
ory. For details, see section “About the
Data being Deleted” of the Operation Man-
ual.
Pressing RESET button lets you reset the micro-
processor to its initial settings without changing
the condition memory.
The microprocessor must be reset under the fol-
lowing conditions:
• Prior to using this unit for the first time after
installation.
• If the unit fails to operate properly.
• If there appear to be problems with the opera-
tion of the system.
• When changing the combination of the equip-
ment.
• When adding/removing additional products
that connect to the unit.
1Turn the ignition switch OFF.
2Press RESET button with a pen tip or
other pointed instrument.
RESET button

9
❒If you have connected other equipment (for
example, a TV tuner) to this Navigation Sys-
tem, be sure to reset that equipment too.
❒After completing connections or when you
want to erase all memorized settings or return
the unit to its initial (factory) settings except
for some navigation items, switch your engine
ON or set the ignition switch to ACC ON
before pressing RESET button.
➲For details, refer to “About the Data being
Deleted” in the the Operation Manual.

10

11
Chapter 1 How to Use Navigation Unit and Names of the Parts
Chapter 1
How to Use Navigation Unit and Names of the Parts
Navigation Unit
This section gives information about the names of the parts and main features using the buttons.
❒For more detail operation, functional limitations, please refer to the Operation Manual.
(1) MAP button
Press to view the map or return to guidance.
Also, when the map is scrolling, pressing this
button returns you to the display of the map of
your surroundings. Use to switch the view mode
of the navigation when the map of your surround-
ings is displayed. If you press this button while in
the audio operation screen, the screen changes
to the Navigation map screen.
(2) AV button
Use to switch between Navigation map screen
and audio operation screen.
(3) VOL (+/–) button
Pressing on the + side of the button to increase
the volume while pressing on the - side of it to
decrease the volume.
 



















12
Chapter 1
How to Use Navigation Unit and Names of the Parts
(4) SRC (SOURCE) button
This unit is turned on by selecting a source. Press
to cycle through all of the available sources.
Press and hold to turn the source off.
(5) RESET button
Press to return to the factory settings (initial set-
tings). Some information items are not erased.
➲Resetting the microprocessor ➞Page 8
(6) Joystick
Move to do manual seek tuning, fast forward,
reverse and track search controls, etc. Push to
display the menu for the Audio operation.
(7) OPEN/CLOSE button
Press to open or close the LCD panel and access
the CD and DVD-ROM loading slot. Operation
varies depending on the position of the LCD
panel and the length of time of pressing this but-
ton.
➲Opening and Closing the LCD Panel ➞
Page 14
(8) ANGLE button
Press to change the LCD panel angle.
➲Adjusting the LCD panel angle ➞Page 15
(9) DEST button
Press to display the Destination menu.
(10) INFO button
Press to display the Info/Traffic menu.
(11) TRFC button
When the XM tuner (GEX-P10XMT) is con-
nected*:
Preset button for XM Instant Traffic & Weather
audio service. Select XM audio source, and find
appropriate Instant Traffic & Weather channel.
Hold down this button while on this channel to
assign preset.
When the XM tuner (GEX-P10XMT) is not
connected:
Not used.
➲XM tuner (GEX-P10XMT) ➞Operation Manual
(12) P.ADJ/B.LIGHT button
Press to enter the PICTURE ADJUST mode.
➲Operating the Picture Adjustment ➞Opera-
tion Manual
Press and hold to turn off the back light of the
LCD panel. To turn on the back light, press this
button again.
(13) MEMO button
When the XM tuner (GEX-P10XMT) is con-
nected and the XM source is selected*:
Press and hold this button to memorize the track
currently being played.
This button flashes when the memorized track is
playing on a station other than the one which you
are currently on. If you press this button while it
is flashing, the station changes to the one play-
ing your track.
When the XM tuner (GEX-P10XMT) is not
connected:
Not used.
➲XM tuner (GEX-P10XMT) ➞Operation Manual
(14) Ambient light sensor
Senses ambient light. This system automatically
adjusts the brightness of the display to compen-
sate for ambient light.
➲Adjusting the dimmer ➞Operation Manual
(15) LCD panel
(16) LCD screen
(17) CD loading slot
Insert a CD to play.
(18) DVD-ROM loading slot
Insert a DVD Map Disc.
(19) CD EJECT button
Press to eject the disc from the CD loading slot.
(20) DVD-ROM EJECT button
Press to eject the disc from the DVD-ROM load-
ing slot.
*: GEX-P10XMT sold separately is required, in
addition to an active subscription to XM Satel-
lite Radio service.

13
Chapter 1 How to Use Navigation Unit and Names of the Parts
Turning the Unit On and Select-
ing a Source
• If the program is not installed, see Opera-
tion Manual and install the program.
1Turn the ignition switch (ACC) ON.
The Navigation System’s power supply comes
on.
2Press SRC button to select a source.
Press SRC button repeatedly to switch
between the following sources:
“XM” (XM tuner) — “SIRIUS” (SIRIUS tuner)
—“RADIO” (tuner) — “TV” (television) —
“AV” (video input) — “S-DVD” (DVD player/
multi-DVD player) — “CD” [CD, MP3/WMA/
WAV](built-in CD drive) — “M-CD” (multi-CD
player) — “EXT-1” (external unit 1) — “EXT-
2” (external unit 2) — “AUX” (Auxiliary equip-
ment)
❒Press and hold to turn the source off.
❒In the following cases, the sound source can-
not be used
— When a unit corresponding to each source
is not connected to this unit.
— When no disc is set in the CD loading slot.
— When no disc is set in the DVD-player (“S-
DVD”).
— When no magazine is set in the multi-CD
player.
— When no magazine is set in the multi-DVD
player.
— When the “AUX” (auxiliary input) is set to
off (refer to Operation Manual).
— When the “AV INPUT” (video input) is not
set to “VIDEO” (refer to Operation Manual).
❒External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
❒When this unit’s blue lead is connected to the
vehicle’s auto-antenna relay control terminal
with the “AUTO ANTENNA” is set to
“SOURCE”, the vehicle’s antenna extends
while this unit’s source is turned on. To
retract the antenna, turn the source off.
➲“AUTO ANTENNA” ➞Operation Manual
Adjusting the Volume
• Use VOL (+/–) to adjust the audio sound
level.
With this product, press VOL (+/–) to
increase or decrease the volume.
❒To adjust the navigation volume, go to the
navigation menu.
➲Navigation volume adjustment ➞Opera-
tion Manual
Turning the Source Off
• Press SRC button and hold until the
source turns off.
❒This product can be switched off by turn-
ing the ACC (ignition) OFF.

14
Chapter 1
How to Use Navigation Unit and Names of the Parts
Inserting/Ejecting a Disc
•Do not use with the LCD panel left open. If
LCD panel is left open, it may result in
injury in the event of an accident.
• Do not open and close the LCD panel with
hands by force. This may cause malfunc-
tion.
• When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
The LCD panel will be closed automatically with
the turning of the ignition switch.
Inserting a CD
1Press OPEN/CLOSE button.
The LCD panel opens halfway, and the CD
loading slot appears.
❒To close the LCD panel, press OPEN/
CLOSE button again.
2Insert a CD into the CD loading slot.
If you insert a CD, the LCD panel closes auto-
matically, and then format reading will start.
❒Make sure the CD loading slot is empty
before inserting a CD into the slot.
❒When a disc is already loaded in the CD
loading slot, select the CD source by
pressing SRC button.
❒You can use AV button to switch between
navigation map displays and audio operation
displays.
❒The built-in CD drive plays one, standard, 12-
cm or 8-cm (single) disc at a time. Do not use
an adapter when playing 8-cm discs.
❒Do not insert anything other than a disc into
the CD loading slot.
➲Playable discs ➞Page 6
❒If you cannot insert a disc completely or if a
inserted disc is not recognized, check that the
label side of the disc is up. Press CD EJECT
button to eject the disc, and check the disc for
damage before inserting the disc again.
❒If the built-in CD drive does not operate prop-
erly, an error message such as ERROR-11
may be displayed.
➲Error messages ➞Operation Manual
Ejecting a CD
1Press OPEN/CLOSE button.
The LCD panel opens halfway.
2Press CD EJECT button.
The CD is ejected.
3Press OPEN/CLOSE button.
The LCD panel closes.
CD EJECT button
CD loading slot

15
Chapter 1 How to Use Navigation Unit and Names of the Parts
Inserting the DVD Map Disc
1Press and hold OPEN/CLOSE button.
The LCD panel fully opens, and the DVD-ROM
loading slot appears.
❒To close the LCD panel, press OPEN/
CLOSE button again.
2Insert the DVD Map Disc into the DVD-
ROM loading slot.
If you insert the DVD Map Disc, the LCD panel
closes automatically, and then format reading
will start.
❒Make sure the DVD-ROM loading slot is
empty before inserting a DVD Map Disc.
❒Inserting the DVD Map Disc reboot DVD
navigation mode.
❒Do not insert anything other than a disc
into the DVD-ROM loading slot.
❒If you cannot insert a disc completely or if
a inserted disc is not recognized, check
that the label side of the disc is up. Press
DVD-ROM EJECT button to eject the
disc, and check the disc for damage
before inserting the disc again.
Ejecting the DVD Map Disc
1Press and hold OPEN/CLOSE button.
The LCD panel fully opens.
2Press DVD-ROM EJECT button.
The DVD Map Disc is ejected.
3Press OPEN/CLOSE button.
The LCD panel closes.
Adjusting the LCD Panel Angle
• Do not open and close the LCD panel with
hands by force. This may cause malfunc-
tion.
• When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
The LCD panel will be closed automatically with
the turning of the ignition switch.
• Press ANGLE button to adjust the LCD
panel to an easily viewable angle.
You can adjust the angle of the LCD panel
every time you press the ANGLE button.
The LCD panel angle continues changing as
long as you press ANGLE button and hold.
❒When you press the ANGLE button with
the maximum angle, the LCD panel closes
all the way.
❒The adjusted angle of the LCD panel will
be memorized and the LCD panel will auto-
matically return to this angle the next time
the turning of the ignition switch (ACC) on.
DVD-ROM EJECT button
DVD-ROM loading slot

16
Chapter 1
How to Use Navigation Unit and Names of the Parts

17
Appendix
Appendix
Troubleshooting
➲About troubleshooting other than description
below ➞Appendix of the Operation Manual
Symptom Cause Action (See)
No picture. The parking brake cord is not connected. Connect a parking brake cord, and apply the
parking brake.
The parking brake is not applied. Connect a parking brake cord, and apply the
parking brake.
Rear display picture
disappears. The source without a video is selected. Switch the source with a video.
There was a problem with the rear display
or a faulty wiring connection, for example. Check the rear display and its connection.
Rear View is selected on the screen. Select view mode other than Rear View.
When the shift lever is in [R], displays rear
view camera images. (When “NAVI” is se-
lected in REAR DISP menu.)
Select SOURCE in REAR DISP menu.(or
when you move the shift lever other than [R]
position, the screen will be returned to the
previous display.)
Nothing is displayed
and the touch panel
keys cannot use.
The setting for the rear view camera is in-
correct.
The shift lever was placed in [R] when the
rear view camera was not connected.
Connect a rear view camera correctly.
Press AV button to return to the source dis-
play and then select the correct setting for
CAMERA.
➲About CAMERA setting ➞Operation
Manual
The back light of the LCD panel is turned
off. Press the P.ADJ/B.LIGHT button to turn on the back light.
Adjusting the volume
of navigation guid-
ance and beep is not
possible.
You cannot adjust them with VOL (+,–)
button. Turn the volume up or down according to “Volume” in the Setting menu.
The navigation does
not boot up or CD play-
back is not possible.
The disc is not inserted into the appropriate
slot. Eject the disc and insert the disc to appropri-
ate slot.(➞About CD loading slot and DVD-
ROM loading slot ➞Page 14)
The disc is inserted upside down. Insert the disc with the label upward.
The disc is dirty. Clean disc.
The disc is cracked or otherwise damaged. Insert a normal, round disc.
The loaded disc is a type this unit cannot
play. Check what type the disc is. (➞Page 18)
A disc which is incompatible with this sys-
tem is inserted. Insert a suitable disc. (➞Page 18)
Power doesn’t turn on.
The unit doesn’t oper-
ate.
Leads and connectors are incorrectly con-
nected. Confirm once more that all connections are correct.
The fuse is blown. Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install the
correct fuse with the same rate.
Noise and other factors are causing the
built-in microprocessor to operate incor-
rectly.
Press RESET button. (➞Page 8)
No sounds are heard.
The volume level will
not rise.
The volume level is low. Adjust the volume level.
The attenuator or mute is on. Turn the attenuator or mute off.
When the ignition
switch is turned ON (or
turned to ACC), the
motor sounds.
This unit confirms whether a disc is loaded
or not. This is a normal operation.

18
Appendix
Handling and Care of the Disc
Some basic precautions are necessary when
handling your discs.
DVD Map Discs
Do not use discs other than those intended for
this product. Use only discs approved by Pioneer.
➲For suitable discs ➞ Page 6
❒If you wish to use other DVD Map Discs, first
check that they are compatible with this
equipment and approved by Pioneer.
DVD-ROM drive/CD drive and
care
• Use only normal, round discs. If you insert
irregular, non-round, shaped discs they may
jam in the DVD-ROM drive/CD drive or not play
properly.
• Check all discs for cracks, scratches or warp-
ing before playing. Discs that have cracks,
scratches or are warped may not play properly.
Do not use such discs.
•Avoid touching the recorded (non-printed side)
surface when handling the disc.
• Store discs in their cases when not in use.
• Keep discs out of direct sunlight and do not
expose the discs to high temperatures.
• Do not attach labels, write on or apply chemi-
cals to the surface of the discs.
• To clean dirt from a disc, wipe the disc with a
soft cloth outward from the center of the disc.
• If the heater is used in cold weather, conden-
sation may form on components inside the
DVD-ROM drive/CD drive. Condensation may
cause the DVD-ROM drive/CD drive to not
operate properly. If you think that condensa-
tion is a problem turn off the DVD-ROM drive/
CD drive for an hour or so to allow the DVD-
ROM drive/CD drive to dry out and wipe any
damp discs with a soft cloth to remove the
moisture.
• Road shocks may interrupt disc playback.
CD-R/CD-RW discs
• When CD-R/CD-RW discs are used, playback
is possible only for discs which have been
finalized.
• It may not be possible to play back CD-R/CD-
RW discs recorded on a music CD recorder or
a personal computer because of disc charac-
teristics, scratches or dirt on the disc, or dirt,
condensation, etc., on the lens of this unit.
• Playback of discs recorded on a personal com-
puter may not be possible, depending on the
application settings and the environment.
Please record with the correct format. (For
details, contact the manufacturer of the appli-
cation.)
• Playback of CD-R/CD-RW discs may become
impossible in case of direct exposure to sun-
light, high temperatures, or the storage condi-
tions in the vehicle.
•Titles and other text information recorded on a
CD-R/CD-RW disc may not be displayed by this
unit (in the case of audio data (CD-DA)).
•This unit conforms to the track skip function of
the CD-R/CD-RW disc. The tracks containing
the track skip information are skipped auto-
matically (in case of audio data (CD-DA)).
• If you insert a CD-RW disc into this unit, time
to playback will be longer than when you insert
a conventional CD or CD-R disc.
• Read the precautions with CD-R/CD-RW discs
before using them.
The system will not
switch on or will not
operate.
Installation or connection has been carried
out incorrectly. Check with your dealer.
Audio skipping. The Navigation System is not firmly se-
cured. Secure the Navigation System firmly.
Symptom Cause Action (See)