Pioneer AVIC-Z2 - Navigation System With DVD player User manual

HDD MULTIMEDIA AV NAVIGATION SERVER
AVIC-Z2
Operation Manual
Notice to all users:
This software requires that the navigation system is properly connected to your vehicle’s
parking brake and depending on your vehicle, additional installation may be required. For
more information, please contact your Authorized Pioneer Electronics retailer or call us at
[phone].
CRB2297A_U_English.book Page 1 Friday, January 5, 2007 2:51 PM

The screens shown in the examples may differ from the actual screens.
The actual screens may be changed without notice for performance and function
improvements.
CRB2297A_U_English.book Page 2 Friday, January 5, 2007 2:51 PM

1
Introduction
Manual Overview
This manual provides important information you need to make full use of your new navigation system.
The beginning sections outline the navigation system and describe its basic operation. The later sec-
tions describe the details of the navigation functions.
Chapters 10 to 16 describe how to operate the AV functions. Please read these chapters when you use
a disc in the built-in DVD drive or operate the Pioneer audio equipment connected to the navigation sys-
tem.
How to use this manual
Be sure to read the following descriptions
License Agreement (Page 5 to 11)
This provides a license agreement of this software. Be sure to read this before using the software.
About the Data for the Map Database (Page 11)
This provides the date when the Map Database was recorded.
Copyright (Page 11)
This provides the copyright of the Map Database.
About Gracenote®(Page 11)
This provides a license agreement and copyright of the Gracenote®music recognition service. Be sure
to read this before using this navigation system.
Finding the operation procedure from what you want to do
When you have decided what you want to do, you can find the page you need from the “Table of Con-
tents”.
Finding the operation procedure from a menu name
If you want to check the meaning of each item displayed on the screen, you will find the necessary page
from the “Display Information” at the end of the manual.
Glossary
See the glossary to find the meaning of a term.
Index
The section at the end of this manual provides an index. See each term to find the main pages where it
is stated.
CRB2297A_U_English.book Page 1 Friday, January 5, 2007 2:51 PM

2
Overview for each chapter
Before Using the System
For safety reasons, it is particularly important that you fully understand your naviga-
tion system before using it. Be sure to read this chapter.
Basic Operation
Please read this section if you want to operate the navigation system immediately.
It will explain the basics of this system.
This section describes the basic operations for navigation.
How to Read the Map Display
This section describes how to read the map screen, and the method of changing map view or
map scale.
Modifying Map Configurations
The behavior of your navigation system depends on the map display and guidance settings. If
you need to change any of the current settings, read the relevant section of this chapter.
Setting a Route to Your Destination
This section describes various ways to search for a destination, edit the current route condi-
tions and operate the route during route guidance.
Registering and Editing Locations
You can register and edit the points on the map. This chapter describes how to register a
home location, favorite location or other location, and how to edit the entry in “Address
Book”.
Using Traffic Information
When Pioneer XM satellite radio tuner (GEX-P10XMT) is connected to the navigation system,
the system can acquire traffic information and perform navigation using the traffic informa-
tion. This chapter describes ways of viewing traffic icons that are displayed on the map and
operation related traffic information.
Using XM Tuner and Other Information
When Pioneer XM satellite radio tuner (GEX-P10XMT) is connected to the navigation system,
variety of information other than traffic can be acquired. The navigation system can also reg-
ister emergency information. This chapter describes ways of the information acquired with
XM satellite radio, registration of emergency information.
Using Hands-free Phoning
When you are using a cellular phone featuring Bluetooth®technology by connecting the
Bluetooth unit (sold separately) to the navigation system, you can operate your cellular
phone hands-free. This chapter describes the operations related to hands-free phoning.
1
2
3
4
5
6
7
8
9
CRB2297A_U_English.book Page 2 Friday, January 5, 2007 2:51 PM

3
Modifying the General Settings for Navigation Functions
The behavior of your navigation system depends a number of general settings for navigation
functions. If you need to change any of the initial settings (default settings), read the relevant
section of this chapter.
Using the AV Source (Built-in DVD Drive and Radio)
This section describes how to use DVD-Videos, CDs, MP3 discs, and the radio.
Using the AV Source (Music Library)
You can record a music CD to the hard disk drive in the navigation system. This chapter
describes recording music and playing back the recorded music.
Using the AV Source (XM, SIRIUS)
This chapter describes the audio source operations that can be used when an XM satellite
radio tuner or SIRIUS satellite radio tuner is connected.
Using the AV Source (M-CD, iPod®, TV)
This chapter describes the audio source operations that can be used when Pioneer audio
equipment featuring IP-BUS (Multi-CD player, iPod adapter, TV tuner) is connected.
Using the AV Source (AV, EXT, AUX)
This chapter describes the audio source operations that can be used when connecting AV
equipment with an RCA connector (AV input), future Pioneer devices (external unit ), or aux-
iliary equipment (AUX).
Customizing the Audio Setting related with Audio Visual
Using the audio source, various audio-visual settings are available to suit your tastes. This
chapter describes how to change the settings.
Operating Your Navigation System with Voice
This section describes navigation operations, such as searching the destination and per-
forming audio operations by voice.
Appendix
Please read the appendix to learn more about your navigation system and information such
as the availability of after-care. Please see “Display Information” at the end of this manual
to check the details for each item on the menu.
10
11
12
13
14
15
16
17
CRB2297A_U_English.book Page 3 Friday, January 5, 2007 2:51 PM

4
Terminology
Before moving on, take a few minutes to read the following information about the conventions used in
this manual. They will help you greatly as you learn how to use your new equipment.
• Hardware buttons on your navigation system are described in ALL CAPITAL, BOLD lettering:
e.g.)
MAP button, MENU button.
• Items in the different menus or touch keys available on the screen are described in brackets [ ] and
bold:
e.g.)
[Destination], [Settings].
• Extra information, alternative usages and other notes are presented like this:
e.g.)
❒Touch keys which are not available at this time are grayed out.
• References to sections that describe information related to the current topics are indicated like this:
e.g.)
➲Setting the Route Options ➞Page 34
The tab on the right corner indicates which operation the description is related to: Nav-
igation operation or AV (Audio Visual) source operation.
For example, “NAVI” indicates that the description is related to the operation for navi-
gation control.
“NAVI/AV” indicates that the description is related to both operation for navigation
control and AV control.
About the definition of terminology
“Front Display” and “Rear Display”
In this manual, the screen that is attached to the body of this navigation unit will be referred to as the
“Front Display”. Any additional optional screen that is purchased for use in conjunction with this navi-
gation unit will be referred to as the “Rear Display”.
“Video image”
“Video image” in this manual indicates the moving image from DVD-Video in the built-in DVD drive or
from the equipment that is connected to this system with an AV-BUS or RCA cable, such as a TV tuner
or general-purpose AV equipment.
Color difference of the map display between day and night
The examples in this manual are illustrated using the daytime display. When driving at night, the colors
you see may differ from those shown.
Night display
CRB2297A_U_English.book Page 4 Friday, January 5, 2007 2:51 PM

5
License Agreement
PIONEER AVIC-Z2 - for U.S.A.
THIS IS A LEGAL AGREEMENT BETWEEN YOU,
AS THE END USER, AND PIONEER ELECTRON-
ICS (USA) INC. (“PIONEER”). PLEASE READ THE
TERMS AND CONDITIONS OF THIS AGREEMENT
CAREFULLY BEFORE USING THE SOFTWARE
INSTALLED ON THE PIONEER PRODUCTS. BY
USING THE SOFTWARE INSTALLED ON THE PIO-
NEER PRODUCTS, YOU AGREE TO BE BOUND
BY THE TERMS OF THIS AGREEMENT. THE
SOFTWARE INCLUDES A DATABASE LICENSED
BY THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV-
ERED BY THE SUPPLIERS’ SEPARATE TERMS,
WHICH ARE ATTACHED TO THIS AGREEMENT
(Refer to page 9). IF YOU DO NOT AGREE WITH
ALL OF THESE TERMS, PLEASE RETURN THE
PIONEER PRODUCTS (INCLUDING THE SOFT-
WARE, AND ANY WRITTEN MATERIALS) WITHIN
FIVE (5) DAYS OF RECEIPT OF THE PRODUCTS,
TO THE AUTHORIZED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM. USE OF THE
SOFTWARE SHALL BE DEEMED TO BE YOUR
CONSENT TO THE LICENSE AGREEMENT.
1. GRANT OF LICENSE
Pioneer grants to you a non-transferable, non
exclusive license to use the software installed on
the Pioneer products (the “Software”) and the
related documentation solely for your own per-
sonal use or for internal use by your business,
only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the Soft-
ware. You shall not loan, rent, disclose, publish,
sell, assign, lease, sublicense, market or other-
wise transfer the Software or use it in any manner
not expressly authorized by this agreement. You
shall not derive or attempt to derive the source
code or structure of all or any portion of the Soft-
ware by reverse engineering, disassembly,
decompilation, or any other means. You shall not
use the Software to operate a service bureau or
for any other use involving the processing of data
for other persons or entities.
Pioneer and its licensor(s) shall retain all copy-
right, trade secret, patent and other proprietary
ownership rights in the Software. The Software is
copyrighted and may not be copied, even if modi-
fied or merged with other products. You shall not
alter or remove any copyright notice or propri-
etary legend contained in or on the Software.
You may transfer all of your license rights in the
Software, the related documentation and a copy
of this License Agreement to another party, pro-
vided that the party reads and agrees to accept
the terms and conditions of this License Agree-
ment.
2. DISCLAIMER OF WARRANTY
The Software and related documentation are pro-
vided to you “AS IS”. PIONEER AND ITS LICEN-
SOR(S) (for the purpose of provisions 2 and 3,
Pioneer and its licensor(s) shall be collectively
referred to as “Pioneer”) MAKES AND YOU
RECEIVE NO WARRANTY FOR THE SOFTWARE,
WHETHER EXPRESS OR IMPLIED, AND ALL
WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR ANY PARTICULAR PURPOSE FOR
THE SOFTWARE ARE EXPRESSLY EXCLUDED.
SOME STATES DO NOT ALLOW EXCLUSION OF
IMPLIED WARRANTIES, SO THE ABOVE EXCLU-
SION MAY NOT APPLY TO YOU. The Software is
complex and may contain some nonconformities,
defects or errors. Pioneer does not warrant that
the Software will meet your needs or expecta-
tions, that operation of the Software will be error
free or uninterrupted, or that all non-conformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warranties
regarding the use or results of the use of the Soft-
ware in terms of its accuracy, reliability or other-
wise.
3. LIMITATION OF LIABILITY
IN NO EVENT SHALL PIONEER BE LIABLE FOR
ANY DAMAGES, CLAIM OR LOSS INCURRED BY
YOU (INCLUDING, WITHOUT LIMITATION, COM-
PENSATORY, INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL, OR EXEMPLARY DAMAGES,
LOST PROFITS, LOST INCOME, LOST SALES OR
BUSINESS, EXPENDITURES, INVESTMENTS, OR
COMMITMENTS IN CONNECTION WITH ANY
BUSINESS, LOSS OF ANY GOODWILL, OR DAM-
AGES) RESULTING FROM THE USE OF OR
INABILITY TO USE THE SOFTWARE, EVEN IF PIO-
NEER HAS BEEN INFORMED OF, KNEW OF, OR
SHOULD HAVE KNOWN OF THE LIKELIHOOD
OF SUCH DAMAGES. THIS LIMITATION APPLIES
CRB2297A_U_English.book Page 5 Friday, January 5, 2007 2:51 PM

6
TO ANY AND ALL CAUSES OF ACTION INDIVID-
UALLY OR IN THE AGGREGATE, INCLUDING
WITHOUT LIMITATION BREACH OF CONTRACT,
BREACH OF WARRANTY, NEGLIGENCE, STRICT
LIABILITY, MISREPRESENTATION, AND OTHER
TORTS. IF PIONEER’S WARRANTY DISCLAIMER
OR LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE OR
INAPPLICABLE, YOU AGREE THAT PIONEER’S
LIABILITY SHALL NOT EXCEED FIFTY PERCENT
(50%) OF THE PRICE PAID BY YOU FOR THE
ENCLOSED PIONEER PRODUCT.
Some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so
the above limitation or exclusion may not apply to
you. This warranty disclaimer and limitation of lia-
bility shall not be applicable to the extent that
they are prohibited by any applicable federal,
state or local law which provides that such a dis-
claimer or limitation cannot be waived or pre-
empted.
4. EXPORT LAW ASSURANCES
You agree and certify that neither the Software
nor any other technical data received from Pio-
neer, nor the direct product thereof, will be
exported outside the United States except as
authorized and as permitted by the laws and reg-
ulations of the United States. If the Software has
been rightfully obtained by you outside of the
United States, you agree that you will not re-
export the Software nor any other technical data
received from Pioneer, nor the direct product
thereof, except as permitted by the laws and reg-
ulations of the United States and the laws and
regulations of the jurisdiction in which you
obtained the Software.
5. TERMINATION
This Agreement is effective until terminated. You
may terminate it at any time by destroying the
Software. The Agreement also will terminate if
you do not comply with any terms or conditions of
this Agreement. Upon such termination, you
agree to destroy the Software.
6. U.S. GOVERNMENT END USERS
If the Software is being acquired by or on behalf
of the United States government or any other
entity seeking or applying rights similar to those
customarily claimed by the United States govern-
ment, the Data is licensed with “Limited Rights”.
Utilization of the Software is subject to the
restrictions specified in the “Rights in Technical
Data” clause at DFARS 252.227-7013, or the
equivalent clause for non-defense agencies. Pio-
neer Electronics (USA) Inc., 2265 East 220th
Street, Long Beach, CA 90810.
7. MISCELLANEOUS
This is the entire Agreement between Pioneer
and you regarding its subject matter. No change
in this Agreement shall be effective unless
agreed to in writing by Pioneer. Pioneer retailers
do not have the authority to change this Agree-
ment. This Agreement shall be governed by and
construed in accordance with the internal laws of
the State of California. If any provision of this
Agreement is declared invalid or unenforceable,
the remaining provisions of this Agreement shall
remain in full force and effect.
CRB2297A_U_English.book Page 6 Friday, January 5, 2007 2:51 PM

7
PIONEER AVIC-Z2 - for Canada
THIS IS A LEGAL AGREEMENT BETWEEN YOU,
AS THE END USER, AND PIONEER ELECTRON-
ICS OF CANADA, INC. (“PIONEER”). PLEASE
READ THE TERMS AND CONDITIONS OF THIS
AGREEMENT CAREFULLY BEFORE USING THE
SOFTWARE INSTALLED ON THE PIONEER
PRODUCTS. BY USING THE SOFTWARE
INSTALLED ON THE PIONEER PRODUCTS, YOU
AGREE TO BE BOUND BY THE TERMS OF THIS
AGREEMENT. THE SOFTWARE INCLUDES A
DATABASE LICENSED BY THIRD PARTY SUP-
PLIER(S) (“SUPPLIERS”), AND YOUR USE OF
THE DATABASE IS COVERED BY THE SUPPLI-
ERS’ SEPARATE TERMS, WHICH ARE
ATTACHED TO THIS AGREEMENT (Refer to page
9). IF YOU DO NOT AGREE WITH ALL OF THESE
TERMS, PLEASE RETURN THE PIONEER PROD-
UCTS (INCLUDING THE SOFTWARE, AND ANY
WRITTEN MATERIALS) WITHIN FIVE (5) DAYS OF
RECEIPT OF THE PRODUCTS, TO THE AUTHO-
RIZED PIONEER DEALER FROM WHICH YOU
PURCHASED THEM. USE OF THE SOFTWARE
SHALL BE DEEMED TO BE YOUR CONSENT TO
THE LICENSE AGREEMENT.
1. GRANT OF LICENSE
Pioneer grants to you a non-transferable, nonex-
clusive license to use the software installed on
the Pioneer products (the “Software”) and the
related documentation solely for your own per-
sonal use or for internal use by your business,
only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the Soft-
ware. You shall not loan, rent, disclose, publish,
sell, assign, lease, sublicense, market or other-
wise transfer the Software or use it in any manner
not expressly authorized by this agreement. You
shall not derive, or attempt to derive, the source
code or structure of all or any portion of the Soft-
ware by reverse engineering, disassembly,
decompilation, or any other means. You shall not
use the Software to operate a service bureau or
for any other use involving the processing of data
for other persons or entities.
Pioneer and its licensor(s) shall retain all copy-
right, trade secret, patent and other proprietary
ownership rights in the Software. The Software is
copyrighted and may not be copied, even if modi-
fied or merged with other products. You shall not
alter or remove any copyright notice or propri-
etary legend contained in or on the Software.
You may transfer all of your license rights in the
Software, the related documentation and a copy
of this License Agreement to another party, pro-
vided that the party reads and agrees to accept
the terms and conditions of this License Agree-
ment.
2. DISCLAIMER OF WARRANTY
The Software and related documentation are pro-
vided to you “AS IS”. PIONEER AND ITS LICEN-
SOR(S) (for the purpose of provisions 2 and 3,
Pioneer and its licensor(s) shall be collectively
referred to as “Pioneer”) MAKES AND YOU
RECEIVE NO WARRANTY FOR THE SOFTWARE,
WHETHER EXPRESS OR IMPLIED, AND ALL
WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR ANY PARTICULAR PURPOSE FOR
THE SOFTWARE ARE EXPRESSLY EXCLUDED.
SOME STATES DO NOT ALLOW EXCLUSION OF
IMPLIED WARRANTIES, SO THE ABOVE EXCLU-
SION MAY NOT APPLY TO YOU. The Software is
complex and may contain some nonconformities,
defects or errors. Pioneer does not warrant that
the Software will meet your needs or expecta-
tions, that operation of the Software will be error-
free or uninterrupted, or that all non-conformities
can or will be corrected. Furthermore, Pioneer
does not make any representations or warranties
regarding the use or results of the use of the Soft-
ware in terms of its accuracy, reliability or other-
wise.
3. LIMITATION OF LIABILITY
IN NO EVENT SHALL PIONEER BE LIABLE FOR
ANY DAMAGES, CLAIM OR LOSS INCURRED BY
YOU (INCLUDING, WITHOUT LIMITATION, COM-
PENSATORY, INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL, OR EXEMPLARY DAMAGES,
LOST PROFITS, LOST INCOME, LOST SALES OR
BUSINESS, EXPENDITURES, INVESTMENTS, OR
COMMITMENTS IN CONNECTION WITH ANY
BUSINESS, LOSS OF ANY GOODWILL, OR DAM-
AGES) RESULTING FROM THE USE OF OR
INABILITY TO USE THE SOFTWARE, EVEN IF PIO-
NEER HAS BEEN INFORMED OF, KNEW OF, OR
SHOULD HAVE KNOWN OF THE LIKELIHOOD
OF SUCH DAMAGES. THIS LIMITATION APPLIES
TO ANY AND ALL CAUSES OF ACTION INDIVID-
CRB2297A_U_English.book Page 7 Friday, January 5, 2007 2:51 PM

8
UALLY OR IN THE AGGREGATE, INCLUDING
WITHOUT LIMITATION BREACH OF CONTRACT,
BREACH OF WARRANTY, NEGLIGENCE, STRICT
LIABILITY, MISREPRESENTATION, AND OTHER
TORTS. IF PIONEER’S WARRANTY DISCLAIMER
OR LIMITATION OF LIABILITY SET FORTH IN THIS
AGREEMENT SHALL OR FOR ANY REASON
WHATSOEVER BE HELD UNENFORCEABLE OR
INAPPLICABLE, YOU AGREE THAT PIONEER’S
LIABILITY SHALL NOT EXCEED FIFTY PERCENT
(50%) OF THE PRICE PAID BY YOU FOR THE
ENCLOSED PIONEER PRODUCT.
Some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so
the above limitation or exclusion may not apply to
you. This warranty disclaimer and limitation of lia-
bility shall not be applicable to the extent that
they are prohibited by any applicable federal,
state or local law which provides that such a dis-
claimer or limitation cannot be waived or pre-
empted.
4. EXPORT LAW ASSURANCES
You agree and certify that neither the Software
nor any other technical data received from Pio-
neer, nor the direct product thereof, will be
exported outside Canada except as authorized
and as permitted by the laws and regulations of
Canada. If the Software has been rightfully
obtained by you outside of Canada, you agree
that you will not re-export the Software nor any
other technical data received from Pioneer, nor
the direct product thereof, except as permitted by
the laws and regulations of Canada and the laws
and regulations of the jurisdiction in which you
obtained the Software.
5. TERMINATION
This Agreement is effective until terminated. You
may terminate it at any time by destroying the
Software. The Agreement also will terminate if
you do not comply with any terms or conditions of
this Agreement. Upon such termination, you
agree to destroy the Software.
6. MISCELLANEOUS
This is the entire Agreement between Pioneer
and you regarding its subject matter. No change
in this Agreement shall be effective unless
agreed to in writing by Pioneer. Pioneer retailers
do not have the authority to change this Agree-
ment. This Agreement shall be governed by and
construed in accordance with the internal laws of
the Province of Ontario and the federal laws of
Canada applicable therein. If any provision of this
Agreement is declared invalid or unenforceable,
the remaining provisions of this Agreement shall
remain in full force and effect.
CRB2297A_U_English.book Page 8 Friday, January 5, 2007 2:51 PM