Pioneer AVIC-U310BT User manual

Basic Hardware buttons
FLASH MEMORY NAVIGATION AUDIO
RECEIVER
Quick Start Guide
This guide is intended to guide you through
the basic functions of this navigation system.
For details, please refer to the operation man-
ual.
Searching for your destination
by address
1Display Navigation Menu
and touch Address.
2Input the information that
you want to set as the des-
tination.
Touching the one of options.
After narrowing down your desti-
nation, “Location confirmation
screen” will appear.
3Touch OK.
After searching for the destina-
tion, the “Route confirmation
screen” appears.
4Touch OK.
This navigation systems gives
you route guidance both visually
and by voice.
AVIC-U310BT
Switching the screen
Audio screen
Map screen
Published by Pioneer Corporation.
Copyright © 2009 by Pioneer Corporation.
All rights reserved. Printed in China
<KYTZX> <09E00000> <CRB3017-A/S> UC
Press the MODE button to switch between map screen and
audio screen.
Navigation Menu
Touch Menu on the map screen.
41
5 6 7
2 3 8 9 a
b c d
1MODE button
2MULTI-CONTROL
Rotate to adjust the audio volume.
Pressing this button when the
audio source is selected plays the
track, file or skips chapter.
3LIST button
The list lets you see the list of
file names or folder names.
4SRC/OFF button
Selecting the audio source.
5BAND/ESC button
Changes the band for the radio.
6DETACH button
Press to remove the detachable
device from the head unit.
5
3
2
1
4
6
1Search by address
2Shortcut key for calculating
route of going home
3Search for stores, restau-
rants, and other businesses
in the points of interest data-
base
4Searching for POIs by using
the data on external storage
devices (SD)
5Select a destination from
your address book
6Select a previously routed
destination
7Canceling your current route
8Searching for a location by
coordinates
9Gas Mileage Management
aSwitching to “PC Mode”
bChecking the current route
conditions
cReplicating the settings
dExporting and importing the
data

1Touch Settings on the
“Navigation Menu” screen.
2Touch Sound.
Basic items on the map
1Information for the next
guidance point
2Current time
3Estimated time of arriv-
al (or distance to the
destination)
4Current route
5Current position
6Street name that your
vehicle is traveling
along
7Changing the map
scale and the map ori-
entation
Pairing your
phone
1Activate the Bluetooth
function on your phone.
2Touch the keys in the fol-
lowing order; Phone ➡
Settings
3Turn Bluetooth On/Off to
On.
4Touch the keys in the fol-
lowing order;
Connections ➡Add ➡
Search devices
The system tries to find and
lists nearby devices.
5Touch your phone on the
list and then enter the PIN
code from your phone.
(The PIN code is “1111”.)
When the pairing is success-
ful, the message will appear.
Transferring
the phone book
1Connect the cellular
phone.
2Touch Transfer on Phone
Menu.
3Touch OK to enter the
waiting screen.
4Operate your phone to
transfer the phone book
entries during waiting
screen.
5After transferring, touch
OK.
When the transferring is suc-
cessful, “Completed data
loading!” will appear.
Dragging the map allows
scrolling. The scroll speed will
change depending on your drag
speed.
Scrolling the map
Setting the volume for navigation
system
1
7
5
4
3
2
6
Selecting the
audio source
1Press the MODE button
when the map of the cur-
rent location is displayed.
2Press the SRC/OFF button
repeatedly to switch
between the following
sources.
XM (XM tuner)➡SIRIUS
(SIRIUS tuner)➡HD Radio
(HD Radio tuner)➡TUNER
(tuner)➡CD (built-in CD
player) ➡USB (USB storage
device)/iPod (iPod connected
using USB input)➡EXT1
(external unit 1)➡EXT2
(external unit 2)➡AUX
(auxiliary device)➡XM (XM
tuner)
Notes:
・ The audio source is disabled
if the equipment is not con-
nected or inserted.
・ When the tuner has been
tuned in to an HD Radio
broadcasting, “TUNER” can
not be selected.
Tuner source screen
1 2 3
4
1 Shows which band the
radio is tuned to: FM1 to
FM3.
2 Shows what preset item
has been selected.
3 Shows the frequency.
4 Storing and recalling
broadcast frequencies
Playing your
Apple iPod
You can control an iPod by con-
necting the USB interface cable
for iPod (CD-IU50) (sold sepa-
rately) to the navigation system.
1Connect your iPod.
2Switch the audio source to
iPod.
2
43
1
5
1 Text display area
2 Switches the strings in the
text area
3 Sets iPod control mode.
This navigation system’s iPod
function can be operated from
the connected iPod.
4 Playing songs in random
order
5 Playing songs related to
the currently playing song
・Pressing MULTI-
CONTROL right or left
Skips the track forward or
backward.
・Pressing and holding
MULTI-CONTROL right or
left
Perform fast forward or
backward.
・Pressing the center of
MULTI-CONTROL
The advanced function
screen appears.
・MULTI-CONTROL
Rotating
Adjusts the audio source vol-
ume.
・Pressing LIST button
Shows the list to select a
song.
Note:
In this manual, iPod and
iPhone will be referred to as
iPod.
USB interface
cable for iPod
USB
connector