Pioneer 2-DIN User manual

2-DIN 12.301179-09
Installation kit includes the following items:
* 1X 2-ISO 100 mm. metal bracket
* 1X Radio trom
* 1X Radio trim D3 (thin trim)
* 2X Mounting plates
* 2X Mounting spacers
* 2X Radio removal keys
* 4X Screws
Installation manual for:
Kia Carens
* Mount the plates.
Use this hole
Use this hole
Pioneer HD1BT
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 14 & 16 marked with an arrow.
Measured from left to right.
Pioneer Avic D3
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 11 & 13 marked with an arrow
Measured from left to right.

Remove the plastic panel at the location
of the arrows.
Remove the orginal radio bracket.
Remove the panel around the gear lever.
Remove the two screws and remove the
original dashboard by using a plastic
wedge.
Connect all of the needed wiring harnesses and check the connections carefully.
12
3
Place the 2-Din metal bracket and tighten
the bracket by four screws.
4
Place the headunit and replace the
panels.
5
2-DIN 12.301179-09