Pioneer DEH-1700 User manual

Operation Manual
Mode demploi
High power CD player with FM/AM tuner
Lecteur CD de grande puissance avec syntoniseur
FM/AM
DEH-1700
English EspañolFrançais

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this man-
ual in a safe place for future reference.
Before You Start
Information to User 4
For Canadian model 4
About this unit 4
After sales service for Pioneer products 4
Product registration 5
Protecting your unit from theft 5
Removing the front panel 5
Attaching the front panel 5
Whats What
ead unit 6
Power ON/OFF
Turning the unit on and selecting a
source 7
Turning the unit off 7
Tuner
Listening to the radio 8
Storing and recalling broadcast
frequencies 8
Tuning in strong signals 8
Storing the strongest broadcast
frequencies 9
Built-in C Player
Playing a CD 10
Playing tracks in a random order 10
Repeating play 10
Pausing CD playback 10
Audio Adjustments
Introduction of audio adjustments 11
Using balance adjustment 11
Using the BTB (bass treble booster) 11
Adjusting BTB 11
Adjusting loudness 12
Adjusting source levels 12
Other Functions
Setting the clock 13
Turning the clock display on or off 13
Additional Information
Understanding built in CD player error
messages 14
CD player and care 14
CD R/CD RW discs 14
Specifications 16
Contents
En
2

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
•Start your volume control at a low setting.
•Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
•Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged
ex
p
osure to excessive noise. This
l
ist of sound
l
eve
l
s is inc
l
uded for
y
our
p
rotection
.
D
ec
i
bel
Leve
l Exampl
e
30
Quiet
l
i
b
rar
y
, soft whis
p
er
s
4
0
L
ivin
g
room, refri
g
erator,
b
edroom awa
y
from traffi
c
50
L
i
g
ht traffic, norma
l
conversation,
q
uiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet plane
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
En 3
English

Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
users right to operate the equipment.
For Canadian model
This Class B digital apparatus complies with
Canadian ICES 003.
About this unit
The tuner frequencies on this unit are allo
cated for use in North America. Use in other
areas may result in poor reception.
WARNING:
andling the cord on this product or cords asso
ciated with accessories sold with the product will
expose you to lead, a chemical known to the
State of California and other governmental enti
ties to cause cancer and birth defects or other re
productive harm. Wash hands after handling.
CAUT ON:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPEC F ED HERE N
MAY RESULT N HAZARDOUS RAD AT ON
EXPOSURE.
CAUT ON:
THE USE OF OPT CAL NSTRUMENTS
W TH TH S PRODUCT W LL NCREASE
EYE HAZARD.
CAUTION
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
!Keep this manual handy as a reference for op
erating procedures and precautions.
!Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
!Protect this unit from moisture.
!If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
Important (Serial number)
The serial number is located on the top of this
unit. For your own security and convenience, be
sure to record this number on the enclosed war
ranty card.
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after sales
service (including warranty conditions) or any
other information. In case the necessary infor
mation is not available, please contact the
companies listed below:
Please do not ship your unit to the companies
at the addresses listed below for repair without
advance contact.
Before You Start
En
4
Section
01

U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801 1760
800 421 1404
CANA A
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R OP2
1 877 283 5901
For warranty information please see the Lim
ited Warranty sheet included with this unit.
Product registration
Visit us at the following site:
1 Register your product. We will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
2 Receive updates on the latest products and
technologies.
3 Download owners manuals, order product
catalogues, research new products, and
much more.
Protecting your unit from
theft
The front panel can be detached from the
head unit to discourage theft.
Important
!Never use force or grip the display and the
buttons too tightly when removing or attach
ing.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press DETACH to release the front
panel.
Press DETACH and the right side of the panel
is released from the head unit.
2 Grab the front panel and remove.
Grab the right side of the front panel and pull
away to the left. The front panel will be de
tached from the head unit.
Attaching the front panel
1 Place the front panel flat against the
head unit.
2 Press the front panel into the face of
the head unit until it is firmly seated.
Before You Start
En 5
English
Section
01

ead unit
1C OCK button
Press to change to the clock display.
2BTB button
Press to select various BTB (bass treble
booster) setting.
3Disc loading slot
Insert a disc to play.
4OUDNESS button
Press to turn loudness on or off.
5EJECT button
Press to eject a CD from your built in CD
player.
6AUDIO button
Press to select various sound quality con
trols.
7c/dbuttons
Press to do manual seek tuning, fast for
ward, reverse and track search controls.
Also used for controlling functions.
8DETACH button
Press to remove the front panel from the
head unit.
9BAND button
Press to select among three FM bands and
one AM band and to cancel the control
mode of functions.
aOCA /BSM button
Press to turn local function on or off.
Press and hold to turn BSM function on or
off.
b16 buttons
Press for preset tuning.
cSOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
dVO UME (+/) buttons
Press to increase or decrease the volume.
1
1
1
5
8
8
8
9
9
9
a
a
a
b
b
b
c
c
c
6
7
d
d
d
2
3
4
Whats What
En
6
Section
02

Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built in CD player, load a disc
in the unit (refer to page 10).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in C playerTuner
When you select a source the unit is turned
on.
Notes
!When no disc has been set in the unit, the
source will not switch to the built in CD player.
!When this units blue/white lead is connected
to the vehicles auto antenna relay control
terminal, the vehicles antenna extends when
this units source is turned on. To retract the
antenna, turn the source off.
Turning the unit off
%Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En 7
English
Section
03

Listening to the radio
1 2 4 53
1Band indicator
Shows which band the radio is tuned to, AM
or FM.
2OC indicator
Shows when local seek tuning is on.
3Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
4Frequency indicator
Shows to which frequency the tuner is
tuned.
5Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
2 Use VO UME to adjust the sound level.
3 Press BAND to select a band.
Press BAND until the desired band is dis
played, F1,F2,F3 for FM or AM.
4 To perform manual tuning, briefly press
cor d.
5 To perform seek tuning, press and hold
cor dfor about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by briefly pressing
either cor d.
#If you press and hold cor dyou can skip sta
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
!Up to 18 FM stations, six for each of the
three FM bands, and six AM stations can
be stored in memory.
%When you find a frequency that you
want to store in memory press one of pre-
set tuning buttons 16 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun
ing button the radio station frequency is re
called from memory.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%Press OCA /BSM repeatedly to turn
local seek tuning on or off.
When local seek tuning is on, OC appears in
the display.
Tuner
En
8
Section
04

Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa
tically store the six strongest broadcast fre
quencies under preset tuning buttons 16and
once stored there you can tune in to those fre
quencies with the touch of a button.
!Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons 16.
%Press OCA /BSM and hold until the
BSM turns on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in the
order of their signal strength. When finished,
BSM stops flashing.
#To cancel the storage process, press
OCA /BSM.
Tuner
En 9
English
Section
04

Playing a CD
1 2
1Track number indicator
Shows the track currently playing.
2Play time indicator
Shows the elapsed playing time of the cur
rent track.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
#Be sure to turn up the label side of a disc.
#After a CD has been inserted, press SOURCE
to select the built in CD player.
#You can eject a CD by pressing EJECT.
2 Use VO UME to adjust the sound level.
3 To perform fast forward or reverse,
press and hold cor d.
4 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur
rent track. Pressing again will skip to the pre
vious track.
Notes
!The built in CD player plays one, standard, 12
cm or 8 cm (single) CD at a time. Do not use
an adapter when playing 8 cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If an error message such as ERROR-11 is dis
played, refer to Understanding built-in CD
player error messages on page 14.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
%Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
display.
Repeating play
Repeat play lets you hear the same track over
again.
%Press 5 repeatedly to turn repeat play
on or off.
When repeat play is on, RPT appears in the
display.
#If you perform track search or fast forward/re
verse, repeat play is automatically cancelled.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
%Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis
play.
Built-in CD Player
En
10
Section
05

Introduction of audio
adjustments
1 2
1Audio display
Shows the audio adjustments status.
2OUD indicator
Appears in the display when loudness is
turned on.
%Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)BASS (bass ad
justment)TREB E (treble adjustment)
OUD (loudness)S A (source level adjust
ment)
#When selecting the FM tuner as the source,
you cannot switch to S A.
#If you do not operate the audio function within
about 30 seconds, the display is automatically re
turned to the source display.
#To return to the display of each source, press
BAND.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
#If the balance setting has been previously ad
justed, BA will be displayed.
2 Press + or to adjust front/rear speaker
balance.
FAD F15 FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
#FAD 0 is the proper setting when only two
speakers are used.
3 Press cor dto adjust left/right speaker
balance.
BA 9 BA R9 is displayed as the left/right
speaker balance moves from left to right.
Using the BTB (bass treble
booster)
There are five stored BTB settings such as
DYNAMIC,POWER,MAX,CUSTOM and
F AT that can easily recall at any time.
!CUSTOM is an adjusted BTB setting that
you create.
!When F AT is selected no supplement or
correction is made to the sound. This is
useful to check effect of the BTB settings
by switching alternatively between F AT
and set BTB setting.
%Press BTB to select the desired BTB set-
ting.
Press BTB repeatedly to switch between the
following BTB setting:
POWERMAXCUSTOMF AT
DYNAMIC
Adjusting BTB
You can adjust the currently selected BTB set
ting as desired. Adjusted BTB settings are
memorized in CUSTOM.
Adjusting bass
You can adjust the bass level.
Audio Adjustments
En 11
English
Section
06

1 Press AUDIO to select BASS.
2 Press + or to adjust the bass level.
+6 6is displayed as the level is increased
or decreased.
Adjusting treble
You can adjust the treble level.
1 Press AUDIO to select TREB E.
2 Press + or to adjust the treble level.
+6 6is displayed as the level is increased
or decreased.
Adjusting loudness
Loudness compensates for deficiencies in the
low and high sound ranges at low volume.
1 Press AUDIO to select OUD.
2 Press + to turn loudness on.
OUD indicator is displayed.
#To turn loudness off, press .
#You can also turn loudness on or off by press
ing OUDNESS.
3 Press cor dto select a desired level.
OW (low)HI (high)
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra
dical changes in volume when switching be
tween sources.
!Settings are based on the FM tuner volume
level, which remains unchanged.
!The AM tuner volume level can also be ad
justed with source level adjustments.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select S A.
3 Press + or to adjust the source vo-
lume.
S A +4 S A 4is displayed as the source vo
lume is increased or decreased.
Audio Adjustments
En
12
Section
06

Setting the clock
Use these instructions to set the clock.
1 Press SOURCE and hold until the unit
turns off.
2 Press AUDIO and hold until clock ap-
pears in the display.
3 Press cor dto select the segment of
the clock display you wish to set.
Pressing cor dwill select one segment of the
clock display:
ourMinute
As you select segments of the clock display
the segment selected will blink.
4 Press + or to set the clock.
Pressing + will increase the selected hour or
minute. Pressing will decrease the selected
hour or minute.
#To cancel clock settings, press BAND.
#You can also cancel clock settings by holding
down AUDIO until the unit turns off.
Turning the clock display on or
off
You can turn the clock display on or off.
%Press C OCK to turn the clock display
on or off.
Each press of C OCK turns the clock display
on or off.
#The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 20 seconds.
Other Functions
En 13
English
Section
07

Understanding built-in CD
player error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to record the
error message.
Message Cause Action
ERROR-11, 12,
17, 30
Dirty disc Clean disc.
ERROR-11, 12,
17, 30
Scratched disc Replace disc.
ERROR-10, 11,
12, 17, 30, A0
Electrical or me
chanical
Turn the ignition
ON and OFF, or
switch to a differ
ent source, then
back to the CD
player.
ERROR-44 All tracks are
skip tracks
Replace disc.
CD player and care
!Use only CDs that have the Compact Disc
Digital Audio mark as show below.
!Use only normal, round CDs. If you insert ir
regular, non round, shaped CDs they may
jam in the CD player or not play properly.
!Check all CDs for cracks, scratches or
warping before playing. CDs that have
cracks, scratches or are warped may not
play properly. Do not use such discs.
!Avoid touching the recorded (non printed)
surface when handling the disc.
!Store discs in their cases when not in use.
!Keep discs out of direct sunlight and do
not expose the discs to high temperatures.
!Do not attach labels, write on or apply che
micals to the surface of the discs.
!To clean a CD, wipe the disc with a soft
cloth outward from the center.
!If the heater is used in cold weather, moist
ure may form on components inside the
CD player. Condensation may cause the CD
player to malfunction. If you think that con
densation is a problem turn off the CD
player for an hour or so to allow it to dry
out and wipe any damp discs with a soft
cloth to remove the moisture.
!Road shocks may interrupt CD playback.
CD-R/CD-RW discs
!When CD R/CD RW discs are used, play
back is possible only for discs which have
been finalized.
!It may not be possible to play back CD R/
CD RW discs recorded on a music CD re
corder or a personal computer because of
disc characteristics, scratches or dirt on
the disc, or dirt, condensation, etc., on the
lens of this unit.
!Playback of discs recorded on a personal
computer may not be possible, depending
on the application settings and the environ
ment. Please record with the correct for
mat. (For details, contact the manufacturer
of the application.)
Additional Information
En
14
Appendix

!Playback of CD R/CD RW discs may be
come impossible in case of direct exposure
to sunlight, high temperatures, or the sto
rage conditions in the vehicle.
!This unit conforms to the track skip func
tion of the CD R/CD RW disc. The tracks
containing the track skip information are
skipped automatically.
!If you insert a CD RW disc into this unit,
time to playback will be longer than when
you insert a conventional CD or CD R disc.
!Read the precautions with CD R/CD RW
discs before using them.
Additional Information
En 15
English
Appendix

Specifications
General
Power source ............................. 14.4 V DC (10.8 15.1 V al
lowable)
Grounding system ................... Negative type
Max. current consumption
..................................................... 10.0 A
Dimensions (W × × D):
DIN
Chassis ..................... 178 × 50 × 157 mm
(7 × 2 × 6 1/8 in.)
Nose ........................... 188 × 58 × 18 mm
(7 3/8 × 2 1/4 × 3/4 in.)
D
Chassis ..................... 178 × 50 × 162 mm
(7 × 2 × 6 3/8 in.)
Nose ........................... 170 × 48 × 13 mm
(6 3/4 × 1 7/8 × 1/2 in.)
Weight .......................................... 1.3 kg (2.9 lbs)
Audio
Continuous power output is 20 W per channel minimum
into 4 ohms, both channels driven 50 to 15,000 z with
no more than 5% T D.
Maximum power output ....... 45 W × 4
Load impedance ...................... 4 W(4 8Wallowable)
Preout max output level/output impedance
..................................................... 2.2 V/1 kW
Bass/Treble:
Bass
Frequency ................ 100 z
Gain ............................ ±12dB
Treble
Frequency ................ 10 k z
Gain ............................ ±12dB
Loudness contour
Low ....................................... +7 dB (100 z), +4 dB (10
k z)
igh ..................................... +10 dB (100 z), +6.5 dB
(10 k z)
(volume: 30 dB)
CD player
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal format:
Sampling frequency ..... 44.1 k z
Number of quantization bits
........................................... 16; linear
Frequency characteristics ... 5 20,000 z (±1 dB)
Signal to noise ratio ............... 94 dB (1 k z) (I F A net
work)
Dynamic range ......................... 92 dB (1 k z)
Number of channels .............. 2 (stereo)
FM tuner
Frequency range ...................... 87.9 107.9 M z
Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,
S/N: 30 dB)
50 dB quieting sensitivity ..... 10 dBf (0.9 µV/75 W, mono)
Signal to noise ratio ............... 75 dB (I F A network)
Distortion ..................................... 0.3 % (at 65 dBf, 1 k z,
stereo)
0.1 % (at 65 dBf, 1 k z,
mono)
Frequency response ............... 30 15,000 z (±3 dB)
Stereo separation .................... 45 dB (at 65 dBf, 1 k z)
Selectivity .................................... 80 dB (±200 k z)
Three signal intermodulation (desired signal level)
..................................................... 30 dBf (two undesired sig
nal level: 100 dBf)
AM tuner
Frequency range ...................... 530 1,710 k z (10 k z)
Usable sensitivity ..................... 18 µV (S/N: 20 dB)
Signal to noise ratio ............... 65 dB (I F A network)
Note
Specifications and the design are subject to pos
sible modifications without notice due to im
provements.
Additional Information
En
16
Appendix

Nous vous remercions davoir acheté cet appareil
Pioneer.
Nous vous prions de lire ces instructions dutilisation afin que vous sachiez utiliser
votre appareil correctement. Quand vous aurez fini la lecture de ces instructions,
rangez ce mode demploi dans un endroit sûr pour r f rence ult rieure.
Avant de commencer
Pour le modèle canadien 19
Quelques mots sur cet appareil 19
Service après vente des produits Pioneer 19
Enregistrement du produit 19
Protection de lappareil contre le vol 20
Détache de la face avant 20
Pose de la face avant 20
escription de lappareil
Appareil central 21
Mise en service, mise hors service
Mise en service de lappareil et sélection
dune source 22
Mise hors service de lappareil 22
Syntoniseur
Écoute de la radio 23
Mise en mémoire et rappel des fréquences
des stations 23
Accord sur les signaux puissants 24
Mise en mémoire des fréquences des
émetteurs les plus puissants 24
Lecteur de C intégré
Écoute dun CD 25
Écoute des plages musicales dans un ordre
quelconque 25
Répétition de la lecture 25
Pause de la lecture dun CD 25
Réglages sonores
Introduction aux réglages sonores 26
Réglage de léquilibre sonore 26
Utilisation de lamplification de la basse et
des aiguës (BTB) 26
Réglage de la basse et des aiguës 27
Réglage de la correction physiologique 27
Ajustement des niveaux des sources 27
Autres fonctions
Réglage de lhorloge 28
Mise en service ou hors service de
laffichage de lhorloge 28
Informations complémentaires
Signification des messages derreur du
lecteur de CD intégré 29
Soins à apporter au lecteur de CD 29
Disques CD R et CD RW 30
Caractéristiques techniques 31
Fr 17
Français
Table des matières

La sélection d’un équipement audio de qualité comme l’unité que vous venez d’acheter n’est que
le début de votre plaisir musical. Maintenant, il est temps de penser à la manière de profiter au
maximum des plaisirs que vous offre votre équipement. Ce fabricant et le Groupe “Consumer
Electronics Group” de l’Association des Industries Electroniques veut que vous profitiez au maxi
mum de votre équipement en l’utilisation à un niveau sûr. Un niveau qui permet au son d’être fort
et clair, sans beuglement ennuyant ou distorsion et, ce qui est plus important, sans affecter votre
ouïe sensible.
Le son peut être décevant. Avec le temps, le “niveau de confort” de votre ouïe s’adapte aux volumes
sonores plus élevés. Ainsi, les sons “normaux” peuvent en fait être forts et affecter votre ouïe. Protégez
vous contre cela en réglant votre équipement à un niveau sûr AVANT l’adaptation de votre ouïe.
Pour établir un niveau sûr:
•Démarrer votre commande de volume à un réglage bas.
•Augmentez lentement le son jusqu’à ce que vous l’entendiez confortablement et clairement, sans
distorsion.
Lorsque vous avez établi un niveau sonore confortable:
•Réglez le cadran et laissez le tel quel.
En prenant une minute pour faire cela, vous pourrez éviter des dommages ou des pertes de sen
sibilités d’écoute dans le futur. Après tout, nous voulons que vous écoutiez pendant toute votre vie.
Nous voulons que vous écoutiez pendant toute votre vie
Utilisé avec sagesse, votre nouvel équipement sonore sera une source de plaisir pendant toute
votre vie. Comme les dommages de l’ouïe provenant d’un bruit fort ne sont souvent détectables que
lorsqu’il est trop tard, ce fabricant et le Groupe “Consumer Electronics Group” de l’Association des
Industries Electroniques vous recommandent d’éviter toute exposition prolongée à un bruit excessif.
Cette liste de niveaux sonores est incluse pour votre protection.
Niveau de
Décibels Exemple
30 Bibliothèque tranquille, chuchotement
40 Salon, réfrigérateur, chambre à distance de la circulation
50 Circulation légère, conversation normale, bureau tranquille
60 Climatiseur à 20 pieds, machine à coudre
70 Aspirateur, sèche cheveux, restaurant bruyant
80 Circulation moyenne en ville, évacuateurs de déchets, réveils à deux pieds
LES BRUITS SUIVANTS PEUVENT ETRE DANGEREUX DANS LE CAS D’UNE EXPO-
SITION CONSTANTE
90 Métro, motocyclette, circulation de camion, tondeuse à gazon
100 Collecteurs de poubelle, scie à chaîne, perceuse pneumatique
120 Concert de groupe rock devant les haut parleurs, coup de tonnerre
140 Coup de pistolet, avion à réaction
180 Aire de lancement d’une fusée
Ces informations ont été gracieusement fournies par la Fondation de la Recherche pour les Sourds.
Fr
18

Pour le modèle canadien
Cet appareil numérique de la classe B est
conformé à la norme NMB 003 du Canada.
Quelques mots sur cet appareil
Les fréquences du syntoniseur de cet appareil
sont attribuées pour une utilisation en Amé
rique du Nord. Lutilisation de lappareil dans
dautres régions peut provoquer une réception
de mauvaise qualité.
PRÉCAUTION
!Ne laissez pas cet appareil venir en contact
avec de liquides. Cela pourrait provoquer une
électrocution. Tous contact avec des liquides
pourrait aussi provoquer des dommages, de
la fumée et une surchauffe de lappareil.
!Conservez ce mode demploi à portée de main
afin de vous y référer pour les modes opératoi
res et les précautions.
!Maintenez toujours le niveau découte à une
valeur telle que vous puissiez entendre les
sons provenant de lextérieur du véhicule.
!Protégez lappareil contre lhumidité.
!Si la batterie est débranchée, ou déchargée, le
contenu de la mémoire sera effacé et une
nouvelle programmation sera nécessaire.
Service après-vente des
produits Pioneer
Veuillez contacter le revendeur ou le distribu
teur chez qui vous avez acheté cet appareil
pour le service après vente (y compris les
conditions de garantie) ou pour toute autre in
formation. Au cas où les informations néces
saires ne sont pas disponibles, veuillez
contacter les sociétés indiquées ci dessous :
Nexpédiez pas lappareil pour réparation à
lune des adresses figurant ci dessous sans
avoir pris un contact préalable.
États-Unis.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801 1760
800 421 1404
CANA A
Pioneer électroniques du Canada, Inc.
Département de service aux consommateurs
300 Allstate Parkway
Markham, Ontario L3R OP2
1 877 283 5901
Pour connaître les conditions de garantie, re
portez vous au document, Garantie limitée,
qui accompagne cet appareil.
Enregistrement du produit
Rendez nous visite sur le site suivant :
1 Enregistrez votre produit. Nous conserverons
sur fichier les détails de votre achat pour vous
permettre de vous reporter à ces informations
en cas de déclaration à votre assurance pour
perte ou vol.
2 Recevez les mises à jour sur les derniers pro
duits et les plus récentes technologies.
3 Téléchargez les modes demploi, commandez
les catalogues des produits, recherchez de
nouveaux produits, et bien plus.
Avant de commencer
Fr 19
Section
Français
01

Protection de lappareil
contre le vol
La face avant peut être détachée de lappareil
central pour décourager les vols.
Important
!Nexercez aucune force excessive, ne saisis
sez pas lafficheur ni les touches trop fort
pour retirer ou fixer la face avant.
!Évitez de heurter la face avant.
!Conservez la face avant à labri des tempéra
tures élevées et de la lumière directe du soleil.
Détache de la face avant
1 Appuyez sur DETACH pour libérer la
face avant.
Appuyez sur DETACH; le côté droit de la face
avant se trouve libéré de lappareil central.
2 Saisissez la face avant et retirez-la.
Saisissez le côté droit de la face avant et tirez
la vers la gauche. La face avant sera détachée
de lappareil central.
Pose de la face avant
1 Placez la face avant bien à plat sur lap-
pareil central.
2 Appuyez sur la face avant de manière
quelle se loge fermement dans lappareil
central.
Avant de commencer
Fr
20
Section
01