Pioneer DEH-2850MP User manual

Black plate (1,1)
Operation Manual
High power CD/MP3/WMA player with FM/AM tuner
DEH-2850MP
English
<CRD4029-A/N>1
-
Português (B)
Español

Black plate (2,1)
<CRD4029-A/N>2
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this man-
ual in a safe place for future reference.
Before You Start
About this unit 3
About this manual 3
About MP3 3
About WMA 3
Visit our website 3
Protecting your unit from theft 4
Removing the front panel 4
Attaching the front panel 4
Whats What
Head unit 5
Operating this unit
asic Operations 6
Turning the unit on and selecting a
source 6
Adjusting the volume 6
Turning the unit off 6
Tuner 6
Listening to the radio 6
Storing and recalling broadcast
frequencies 7
Tuning in strong signals 7
Storing the strongest broadcast
frequencies 7
uilt-in Player 8
Playing a disc 8
Repeating play 9
Playing tracks in random order 9
Scanning tracks or folders of a
disc 9
Pausing disc playback 9
Searching every 10 tracks in the
current disc or folder 10
Using compression and MX 10
Displaying text information on
disc 10
Audio Adjustments 11
Introduction of audio
adjustments 11
Using balance adjustment 11
Using the equalizer 11
Adjusting equalizer curves 11
Adjusting loudness 11
Adjusting source levels 12
Initial Settings 12
Adjusting initial settings 12
Setting the clock 12
Setting the FM tuning step 13
Setting the AM tuning step 13
Additional nformation
Error messages 14
Handling guideline of discs and player 14
MP3, WMA and WAV files 14
Example of a hierarchy 15
Compressed audio compatibility 15
Specifications 16
Contents
En
2

Black plate (3,1)
<CRD4029-A/N>3
About this unit
CAUT ON
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
!Keep this manual handy as a reference for op-
erating procedures and precautions.
!Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
!Protect this unit from moisture.
!If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
!If this unit does not operate properly, contact
your dealer or nearest authorized Pioneer Ser-
vice Station.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this units potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe WARN NGs and CAU-
T ONs in this manual.
About MP3
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e. revenue-
generating) real time broadcasting (terrestrial,
satellite, cable and/or any other media), broad-
casting/streaming via internet, intranets and/
or other networks or in other electronic con-
tent distribution systems, such as pay-audio or
audio-on-demand applications. An indepen-
dent license for such use is required. For de-
tails, please visit
http://www.mp3licensing.com.
About WMA
The Windows Media"logo printed on the box
indicates that this unit can play back WMA
data.
WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later.
Windows Media and the Windows logo are tra-
demarks or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
Note
This unit may not operate correctly depending on
the application used to encode WMA files.
Visit our website
Visit us at the following site:
!We offer the latest information about Pio-
neer Corporation on our website.
Before You Start
En 3
English
Section
01

Black plate (4,1)
<CRD4029-A/N>4
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the provided protective
case to prevent theft.
mportant
!Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press DETACH to release the front
panel.
Press DETACH and the right side of the panel
is released from the head unit.
2 Grab the front panel and remove.
Grab the right side of the front panel and pull
away to the left. The front panel will be de-
tached from the head unit.
3 Put the front panel into provided pro-
tective case for safe eeping.
Attaching the front panel
1 Place the front panel flat against the
head unit.
2 Press the front panel into the face of
the head unit until it is firmly seated.
Before You Start
En
4
Section
01

Black plate (5,1)
<CRD4029-A/N>5
ead unit
1EQ button
Press to select various equalizer curves.
Press and hold to turn loudness on or off.
2DISPLAY button
Press to select different displays.
3Disc loading slot
Insert a disc to play.
4EJECT button
Press to eject a CD from your built-in CD
player.
5SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
6BAND button
Press to select among three FM bands and
one AM band and to cancel the control
mode of functions.
7DETACH button
Press to remove the front panel from the
head unit.
8a/b/c/dbuttons
Press to perform manual seek tuning, fast
forward, reverse and track search controls.
Also used for controlling functions.
9AUDIO button
Press to select various sound quality con-
trols.
aLOCAL/BSM button
Press to turn local function on or off.
Press and hold to turn SM function on or
off.
b16 buttons
Press for preset tuning. Also used for con-
trolling functions.
cCLOCK button
Press to change to the clock display.
dVOLUME (+/) buttons
Press to increase or decrease the volume.
3
3
3
d
d
d
1
2
4
6
6
6
5
5
5
7
7
7
8
8
9
9
9
a
a
a
b
b
b
c
c
c
Whats What
En 5
English
Section
02

Black plate (6,1)
<CRD4029-A/N>6
Basic Operations
Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 8).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in CD playerTuner
When you select a source, the unit is turned
on.
Notes
!When no disc has been set in the unit, the
source will not switch to the built-in CD player.
!When this units blue/white lead is connected
to the vehicles auto-antenna relay control
terminal, the vehicles antenna extends when
this units source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%Use VOLUME to adjust the sound level.
Turning the unit off
%Press SOURCE and hold until the unit
turns off.
Tuner
Listening to the radio
12
4 53
mportant
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 13).
1Band indicator
Shows which band the radio is tuned to, AM
or FM.
2LOC indicator
Shows when local seek tuning is on.
3Stereo (5) indicator
Shows when the selected frequency is
being broadcast in stereo.
4Frequency indicator
Shows the frequency to which the tuner is
tuned.
5Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
2 Press BAND to select a band.
Press BAND until the desired band (F1,F2,F3
for FM or AM) is displayed.
3 To perform manual tuning, briefly press
cor d.
4 To perform see tuning, press and hold
cor dfor about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
Operating this unit
En
6
Section
03

Black plate (7,1)
<CRD4029-A/N>7
#You can cancel seek tuning by briefly pressing
cor d.
#If you press and hold cor dyou can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling broadcast
frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
!Up to 18 FM stations, six for each of the
three FM bands, and six AM stations can
be stored in memory.
%When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 16 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
#You can also use aand bto recall radio sta-
tion frequencies assigned to preset tuning but-
tons 16.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%Press LOCAL/BSM repeatedly to turn
local see tuning on or off.
When local seek tuning is on, LOC appears in
the display.
Storing the strongest broadcast
frequencies
SM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16.
Once stored you can tune in to those frequen-
cies with the touch of button.
!Storing broadcast frequencies with SM
may replace broadcast frequencies you
have saved using buttons 16.
%Press LOCAL/BSM and hold until the
BSM turns on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in the
order of their signal strength. When finished,
BSM stops flashing.
#To cancel the storage process, press
LOCAL/BSM.
Operating this unit
En 7
English
Section
03

Black plate (8,1)
<CRD4029-A/N>8
Built-in Player
Playing a disc
1 2
When playing a CD
1
4 5
2
3
When playing an MP3/WMA/WAV disc
1Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2Trac number indicator
Shows the track (file) currently playing.
!If a track number 100 or more is selected,
dwill light up above the last two digits
of the track number.
3Folder number indicator
Shows the number of folder currently play-
ing.
4MP3 indicator
Shows when an MP3 file is playing.
5WMA indicator
Shows when a WMA file is playing.
1 Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
#Be sure to turn up the label side of a disc.
#After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
#You can eject a CD (CD-ROM) by pressing
EJECT.
2 Press aor bto select a folder when
playing an MP3/WMA/WAV disc.
#You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
#To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
3 To perform fast forward or reverse,
press and hold cor d.
#If you select ROUGH, pressing and holding c
or denables you to search every 10 tracks in the
current disc (folder). (Refer to Searching every 10
tracks in the current disc or folder on page 10.)
4 To s ip bac or forward to another
trac , press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!The built-in CD player plays one standard, 12-
cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 14.
!There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read, FRMTREAD is displayed.
!When playing discs with MP3/WMA/WAV files
and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, both types can be
played only by switching mode between MP3/
WMA/WAV and CD-DA with BAND.
!If you have switched between playback of
MP3/WMA/WAV files and audio data (CD-DA),
playback starts at the first track on the disc.
!The built-in CD player can play back an MP3/
WMA/WAV file recorded on CD-ROM. (Refer
to page 14 for files that can be played back.)
Operating this unit
En
8
Section
03

Black plate (9,1)
<CRD4029-A/N>9
!When playing back files recorded as V R
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
!When playing MP3/WMA/WAV disc, there is
no sound on fast forward or reverse.
Repeating play
Repeat play lets you hear the same track over
again.
For MP3/WMA/WAV playback, you can select
a desired repeat range from among FRPT
(folder repeat), RPT (one-track repeat) and disc
repeat.
%When playing a CD, press 5 repeatedly
to turn repeat play on or off.
When repeat play is on, RPT appears in the
display.
#If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
%When playing an MP3/WMA/WAV disc,
press 5 to select the repeat range.
Press 5until the desired repeat range appears
in the display.
!RPT Repeat just the current track
!FRPT Repeat the current folder
!Track number (e.g., T04)Repeat all tracks
#If you select another folder during repeat play,
the repeat play range changes to disc repeat.
#If you perform track search or fast forward/re-
verse during RPT, the repeat play range changes
to FRPT.
#When FRPT is selected, it is not possible to
play back a subfolder of that folder.
Playing tracks in random order
Random play lets you play back tracks on the
CD in a random order.
For MP3/WMA/WAV playback, this function
lets you play back tracks in a random order
within the repeat range, FRPT (folder repeat)
and disc repeat.
1 When playing an MP3/WMA/WAV disc,
select the repeat range.
Refer to Repeating play on this page.
2 Press 4 repeatedly to turn random play
on or off.
When random play is on, RDM appears in the
display.
#If you turn random play on during FRPT,
FRDM appears in the display.
Scanning tracks or folders of a disc
Scan play lets you hear the first 10 seconds of
each track on the CD.
For MP3/WMA/WAV playback, scan play com-
mences within the selected repeat range,
FRPT (folder repeat) and disc repeat.
1 When playing an MP3/WMA/WAV disc,
select the repeat range.
Refer to Repeating play on this page.
2 Press 3 to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.
#If you turn scan play on during FRPT,FSCN
appears in the display.
3 When you find the desired trac press 3
to turn scan play off.
#After scanning of a disc (folder) is finished,
normal playback of the tracks will begin again.
Pausing disc playback
Pause lets you temporarily stop playback of
the disc.
%Press 6 repeatedly to turn pause on or
off.
When pause is on, PAUSE appears in the dis-
play.
Operating this unit
En 9
English
Section
03

Black plate (10,1)
<CRD4029-A/N>10
Searching every 10 tracks in the
current disc or folder
You can switch the search method between
fast forward/reverse and searching every 10
tracks. Selecting ROUGH enables you to
search every 10 tracks.
1 Press 2 to select the search method.
Press 2until the desired search method ap-
pears in the display.
!FF/REV Fast forward and reverse
!ROUGH Searching every 10 tracks
2 Select the search method ROUGH.
3 Press and hold cor dto search every
10 trac s on a disc (folder).
#If a disc (folder) contains less than 10 tracks,
pressing and holding c(d) recalls the first (last)
track of the disc (folder). Also, if the remaining
number of tracks after searching every 10 tracks
is less than 10, pressing and holding c(d) re-
calls the first (last) track of the disc (folder).
Using compression and BMX
Using the COMP (compression) and MX
functions let you adjust the sound playback
quality of this player. Each of the functions has
a two-step adjustment. The COMP function
balances the output of louder and softer
sounds at higher volumes. MX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
%Press 1 to select your favorite setting.
Press 1repeatedly to switch between the fol-
lowing settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2
Displaying text information on
disc
Text information recorded on a disc can be dis-
played.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
For CD TEXT discs
Play timeDISC TTL (disc title)ART NAME
(disc artist name)TRK TTL (track title)
ART NAME (track artist name)
For MP3/WMA discs
Folder and track numbersTrack number and
play timeFOLDER (folder name)FILE (file
name)TRK TTL (track title)ART NAME (ar-
tist name)ALBM TTL (album title)
COMMENT (comment)it rate
For WAV discs
Folder and track numbersTrack number and
play timeFOLDER (folder name)FILE (file
name)Sampling frequency
Notes
!You can scroll to the left of the title by pressing
and holding DISPLAY.
!CD TEXT are discs that have certain informa-
tion encoded on the disc during manufacture.
CD TEXT discs may contain such information
as the CD title, track title, artists name and
playback time.
!If specific information has not been recorded
on a disc, NO XXXX will be displayed (e.g.,
NO T-TTL).
!When playing back V R (variable bit rate)-re-
corded MP3 files, VBR is displayed instead of
bit rate value.
!When playing back V R-recorded WMA files,
the average bit rate value is displayed.
!Depending on the version of iTunes®used to
write MP3 files onto a disc, comment informa-
tion may not be correctly displayed.
iTunes®is a trademark of Apple Computer,
Inc., registered in the U.S. and other coun-
tries.
!The sampling frequency shown in the display
may be abbreviated.
Operating this unit
En
10
Section
03

Black plate (11,1)
<CRD4029-A/N>11
Audio Adjustments
Introduction of audio adjustments
1 2
1Audio display
Shows the audio adjustment status.
2LOUD indicator
Appears in the display when loudness is
turned on.
%Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)BASS (bass ad-
justment)MID (mid-range adjustment)
TREBLE (treble adjustment)LOUD (loud-
ness)SLA (source level adjustment)
#When selecting the FM tuner as the source,
you cannot switch to SLA.
#If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
#To return to the display of each source, press
BAND.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
#If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press aor bto adjust front/rear spea -
er balance.
FAD F15 FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
#FAD 0 is the proper setting when only two
speakers are used.
3 Press cor dto adjust left/right spea er
balance.
BAL L 9 BAL R 9 is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
There are six stored equalizer settings such as
DYNAMIC,VOCAL,NATURAL,CUSTOM,
FLAT and POWERFUL that can easily be re-
called at any time.
!CUSTOM is an adjusted equalizer curve
that you create.
!When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
%Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol-
lowing equalizers:
DYNAMICVOCALNATURALCUSTOM
FLATPOWERFUL
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
Adjusting bass/mid/treble
You can adjust the bass/mid/treble level.
1 Press AUDIO to select BASS/MID/
TREBLE.
2 Press aor bto adjust the level.
+6 6is displayed as the level is increased
or decreased.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
Operating this unit
En 11
English
Section
03

Black plate (12,1)
<CRD4029-A/N>12
2 Press ato turn loudness on.
LOUD indicator is displayed.
#To turn loudness off, press b.
#You can also turn loudness on or off by press-
ing and holding EQ.
3 Press cor dto select a desired level.
LOW (low)HI (high)
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!Settings are based on the FM tuner volume
level, which remains unchanged.
!The AM tuner volume level can also be ad-
justed with source level adjustments.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
3 Press aor bto adjust the source vo-
lume.
SLA +4 SLA 4is displayed as the source vo-
lume is increased or decreased.
Initial Settings
Adjusting initial settings
1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press AUDIO and hold until cloc ap-
pears in the display.
3 Press AUDIO to display the function
names.
Press AUDIO repeatedly to switch between
the following settings:
ClockFM (FM tuning step)AM (AM tuning
step)
Use the following instructions to operate each
particular setting.
#To cancel initial settings, press BAND.
#You can also cancel initial settings by holding
down SOURCE until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1 Press AUDIO to select cloc .
2 Press cor dto select the segment of
the cloc display you wish to set.
Pressing cor dwill select one segment of the
clock display:
HourMinute
As you select segments of the clock display
the segment selected will blink.
Operating this unit
En
12
Section
03

Black plate (13,1)
<CRD4029-A/N>13
3 Press aor bto set the cloc .
Pressing awill increase the selected hour or
minute. Pressing bwill decrease the selected
hour or minute.
#To cancel clock settings, press BAND.
#You can also cancel clock settings by holding
down AUDIO until the unit turns off.
Turning the clock display on or off
You can turn the clock display on or off.
%Press CLOCK to turn the cloc display
on or off.
Each press of CLOCK turns the clock display
on or off.
#The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
!If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune
in the stations with manual tuning or use
seek tuning again.
1 Press AUDIO to select FM.
2 Press cor dto select the FM tuning
step.
Press cto select 50 (50 kHz). Press dto se-
lect 100 (100 kHz).
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
1 602 kHz allowable) to 10 kHz (530 1 640
kHz allowable).
1 Press AUDIO to select AM.
2 Press cor dto select the AM tuning
step.
Press cto select 9(9 kHz). Press dto select
10 (10 kHz).
Operating this unit
En 13
English
Section
03

Black plate (14,1)
<CRD4029-A/N>14
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to record the
error message.
Message Cause Action
ERROR-11, 12,
17, 30
Dirty disc Clean disc.
ERROR-11, 12,
17, 30
Scratched disc Replace disc.
ERROR-10, 11,
12, 15, 17, 30,
A0
Electrical or me-
chanical
Turn the ignition
ON and OFF, or
switch to a differ-
ent source, then
back to the CD
player.
ERROR-15 The inserted disc
does not contain
any data
Replace disc.
ERROR-22, 23 The CD format
cannot be played
back
Replace disc.
NO AUDIO The inserted disc
does not contain
any files that can
be played back
Replace disc.
SKIPPED The inserted disc
contains WMA
files that are pro-
tected by DRM
Replace disc.
PROTECT All the files on
the inserted disc
are secured by
DRM
Replace disc.
andling guideline of discs
and player
!Use only discs featuring either of following
two logos.
!Use only conventional, fully circular discs.
Do not use shaped discs.
!Do not use cracked, chipped, warped, or
otherwise damaged discs as they may da-
mage the player.
!Unfinalized CD-R/CD-RW disc playback is
not possible.
!Do not touch the recorded surface of the
discs.
!Store discs in their cases when not in use.
!Avoid leaving discs in excessively hot envir-
onments including under direct sunlight.
!Do not attach labels, write on or apply che-
micals to the surface of the discs.
!To clean a CD, wipe the disc with a soft
cloth outward from the center.
!Condensation may temporarily impair the
players performance. Leave it to adjust to
the warmer temperature for about one
hour. Also, wipe any dump discs with a soft
cloth.
!Playback of discs may not be possible be-
cause of disc characteristics, disc format,
recorded application, playback environ-
ment, storage conditions and so on.
!Text information may not be correctly dis-
played depending on the recorded environ-
ment.
!Road shocks may interrupt disc playback.
!Read the precautions with discs before
using them.
MP3, WMA and WAV files
!Depending on the version of Windows
Media Player used to encode WMA files,
album names and other text information
may not be correctly displayed.
!There may be a slight delay when starting
playback of WMA files encoded with image
data.
Additional Information
En
14
ppendix

Black plate (15,1)
<CRD4029-A/N>15
!ISO 9660 Level 1 and 2 compliant. Romeo
and Joliet file systems are both compatible
with this player.
!Multi-session playback is possible.
!MP3/WMA/WAV files are not compatible
with packet write data transfer.
!Only 64 characters from the beginning can
be displayed as a file name (including the
extension such as .mp3, .wma or .wav) or a
folder name.
!Folder selection sequence or other opera-
tion may be altered depending on the en-
coding or writing software.
!Regardless of the length of blank section
between the songs of original recording,
MP3/WMA/WAV discs will play with a short
pause between songs.
!File extensions such as .mp3, .wma or.wav
must be used properly.
Example of a hierarchy
: Folder
:File
1
2
3
4
5
6
L
e
v
e
l 1 L
e
v
e
l 2 L
e
v
e
l 3 L
e
v
e
l 4
!This unit assigns folder numbers. The user
cannot assign folder numbers.
!Folder hierarchy is allowed up to eight tiers.
However, practical hierarchy of folder is
less than two tiers.
!Up to 99 folders on a disc can be played
back.
Compressed audio compatibility
MP3
!it rate: 8320 kbps
!Sampling frequency: 16, 22.05, 24, 32, 44.1,
48 kHz (32, 44.1, 48 kHz for emphasis)
!Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3
(ID3 tag Version 2.x is given priority than
Version 1.x.)
!M3u playlist: No
!MP3i (MP3 interactive), mp3 PRO: No
WMA
!Compatible format: WMA encoded by Win-
dows Media Player Ver. 7, 7.1, 8, 9 or 10
!it rate: 48320 kbps (C R), 48384 kbps
(V R)
!Sampling frequency: 32, 44.1, 48 kHz
!Windows Media Audio 9 Professional, Loss-
less, Voice: No
WAV
!Compatible format: Linear PCM (LPCM),
MS ADPCM
!Quantization bits: 8 and 16 (LPCM), 4 (MS
ADPCM)
!Sampling frequency: 16, 22.05, 24, 32, 44.1,
48 kHz (LPCM), 22.05, 44.1 kHz (MS AD-
PCM)
Additional Information
En 15
English
ppendix

Black plate (16,1)
<CRD4029-A/N>16
Specifications
General
Rated power source ............... 14.4 V DC
(allowable voltage range:
12.0 14.4 V DC)
Grounding system ................... Negative type
Max. current consumption
..................................................... 10.0 A
Dimensions (W × H × D):
DIN
Chassis ..................... 178 × 50 × 157 mm
Nose ........................... 188 × 58 × 20 mm
D
Chassis ..................... 178 × 50 × 162 mm
Nose ........................... 170 × 48 × 15 mm
Weight .......................................... 1.3 kg
Audio
Continuous power output ... 22 W × 4 (50 15 000 Hz,
5% THD, 4 Wload, both
channels driven)
Maximum power output ....... 50 W × 4
Load impedance ...................... 4 W(4 8Wallowable)
Preout max output level/output impedance
..................................................... 2.2 V/1 kW
ass/Mid/Treble:
ass
Frequency ................ 100 Hz
Gain ............................ ±13d
Mid
Frequency ................ 1 kHz
Gain ............................ ±12d
Treble
Frequency ................ 10 kHz
Gain ............................ ±12d
Loudness contour:
Low ....................................... +7 d (100 Hz), +4 d (10
kHz)
High ..................................... +10 d (100 Hz), +6.5 d
(10 kHz)
(volume: 30 d )
CD player
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal format:
Sampling frequency ..... 44.1 kHz
Number of quantization bits
........................................... 16; linear
Frequency characteristics ... 5 20 000 Hz (±1 d )
Signal-to-noise ratio ............... 94 d (1 kHz) (IEC-A net-
work)
Dynamic range ......................... 92 d (1 kHz)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10 (2ch
audio)
(Windows Media Player)
WAV signal format .................. Linear PCM & MS ADPCM
FM tuner
Frequency range ...................... 87.5 108.0 MHz
Usable sensitivity ..................... 8 d f (0.7 µV/75 W, mono,
S/N: 30 d )
50 d quieting sensitivity ..... 10 d f (0.9 µV/75 W, mono)
Signal-to-noise ratio ............... 75 d (IEC-A network)
Distortion ..................................... 0.3 % (at 65 d f, 1 kHz,
stereo)
0.1 % (at 65 d f, 1 kHz,
mono)
Frequency response ............... 30 15 000 Hz (±3 d )
Stereo separation .................... 45 d (at 65 d f, 1 kHz)
AM tuner
Frequency range ...................... 531 1 602 kHz (9 kHz)
530 1 640 kHz (10 kHz)
Usable sensitivity ..................... 18 µV (S/N: 20 d )
Signal-to-noise ratio ............... 65 d (IEC-A network)
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Additional Information
En
16
ppendix

Black plate (17,1)
<CRD4029-A/N>17
Gracias por haber comprado este producto Pioneer.
Lea con detenimiento estas instrucciones sobre el funcionamiento del aparato,
para que pueda dar el mejor uso posible a su modelo. Una ve que las haya leído,
guarde este manual en un lugar seguro para consultarlo en el futuro.
Antes de comenzar
Acerca de esta unidad 18
Acerca de este manual 18
Acerca de MP3 18
Acerca de WMA 18
Visite nuestro sitio Web 19
Protección del producto contra robo 19
Extracción de la carátula 19
Colocación de la carátula 19
Qué es cada cosa
Unidad principal 20
Utilización de esta unidad
Funciones básicas 21
Encendido de la unidad y selección de
una fuente 21
Ajuste del volumen 21
Apagado de la unidad 21
Sintonizador 21
Para escuchar la radio 21
Almacenamiento y llamada de
frecuencias 22
Sintonización de señales fuertes 22
Almacenamiento de las frecuencias
de radio más fuertes 22
Reproductor incorporado 23
Reproducción de un disco 23
Repetición de reproducción 24
Reproducción de las pistas en un
orden aleatorio 24
Exploración de pistas o carpetas de
un disco 24
Pausa de la reproducción de un
disco 25
úsqueda cada 10 pistas en el disco o
carpeta actual 25
Uso de la compresión y MX 25
Visualización de información de texto
en el disco 25
Ajustes de audio 27
Introducción a los ajustes de
audio 27
Uso del ajuste del balance 27
Uso del ecualizador 27
Ajuste de las curvas de
ecualización 27
Ajuste de la sonoridad 28
Ajuste de los niveles de la fuente 28
Ajustes iniciales 29
Configuración de los ajustes
iniciales 29
Ajuste del reloj 29
Ajuste del paso de sintonía de FM 29
Ajuste del paso de sintonía de
AM 30
nformación adicional
Mensajes de error 31
Pautas para el manejo de discos y del
reproductor 31
Ficheros MP3, WMA y WAV 32
Ejemplo de una jerarquía 32
Compatibilidad con audio
comprimido 32
Especificaciones 34
Es 17
Español
Contenido

Black plate (18,1)
<CRD4029-A/N>18
Acerca de esta unidad
PRECAUC ÓN
!No permita que esta unidad entre en contacto
con líquidos, ya que ello puede producir una
descarga eléctrica. Además, el contacto con
líquidos puede causar daños en la unidad,
humo y recalentamiento.
!Conserve este manual a mano para que
pueda consultar los procedimientos de opera-
ción y las precauciones cuando sea necesa-
rio.
!Mantenga siempre el volumen lo suficiente-
mente bajo como para que pueda escuchar
los sonidos que provienen del exterior del
vehículo.
!Proteja esta unidad de la humedad.
!Si se desconecta o se descarga la batería, la
memoria preajustada se borrará y será nece-
sario reprogramarla.
!Si esta unidad no funciona correctamente, co-
muníquese con su concesionario o el servicio
técnico oficial de Pioneer más próximo a su
domicilio.
Acerca de este manual
Esta unidad incluye diversas funciones sofisti-
cadas que garantizan una recepción y un fun-
cionamiento de calidad superior. Por sus
características de diseño, todas las funciones
se pueden usar con gran facilidad; sin embar-
go, muchas de ellas necesitan una explica-
ción. Este manual le ayudará a aprovechar
todo el potencial que ofrece esta unidad y a
disfrutar al máximo del placer de escuchar
música.
Recomendamos que se familiarice con las
funciones y su operación, leyendo el manual
antes de comenzar a usar esta unidad. Es par-
ticularmente importante que lea y tenga en
cuenta los mensajes de ADVERTENC A y
PRECAUC ÓN en este manual.
Acerca de MP3
La venta de este producto sólo otorga una li-
cencia para su uso privado, no comercial. No
otorga ninguna licencia ni concede ningún
derecho a utilizar este producto en transmisio-
nes comerciales (es decir, lucrativas) en tiem-
po real (terrestres, vía satélite, por cable y/o
por cualquier otro medio), transmisiones/
streaming por internet, intranets y/u otras
redes o en otros sistemas de distribución de
contenido electrónico, como por ejemplo, apli-
caciones de audio pago (pay-audio) o a solici-
tud (audio-on-demand). Se necesita una
licencia independiente para su uso comercial.
Para obtener más información, visite el sitio
http://www.mp3licensing.com.
Acerca de WMA
El logo de Windows Media"impreso en la
caja indica que esta unidad puede reproducir
datos WMA.
WMA es la abreviatura de Windows Media
Audioy alude a una tecnología de compre-
sión de audio desarrollada por Microsoft Cor-
poration. Los datos WMA se pueden codificar
utilizando Windows Media Player versión 7 o
posterior.
Windows Media y el logo de Windows son
marcas comerciales o registradas de Micro-
soft Corporation en los EE.UU. y/o en otros
países.
Nota
Esta unidad puede no funcionar correctamente,
según sea la aplicación utilizada para codificar
los ficheros WMA.
Antes de comenzar
Es
18
Sección
01

Black plate (19,1)
<CRD4029-A/N>19
Visite nuestro sitio Web
Visítenos en el siguiente sitio:
!En nuestro sitio Web ofrecemos la informa-
ción más reciente acerca de Pioneer
Corporation.
Protección del producto
contra robo
La carátula puede extraerse de la unidad prin-
cipal y almacenarse en la carcasa protectora
provista para evitar robos.
mportante
!Nunca presione ni sujete el display ni los bo-
tones con fuerza excesiva al extraer o colocar
la carátula.
!Evite someter la carátula a impactos excesi-
vos.
!Mantenga la carátula fuera del alcance de la
luz solar directa y no la exponga a altas tem-
peraturas.
Extracción de la carátula
1 Presione DETACH para soltar la carátu-
la.
Presione DETACH, y el lado derecho del panel
se soltará de la unidad principal.
2 Tome la carátula y extráigala.
Tome el lado derecho de la carátula y tire de él
hacia la izquierda. La carátula saldrá de la uni-
dad principal.
3 Coloque la carátula en la carcasa pro-
tectora provista para guardarla de manera
segura.
Colocación de la carátula
1 Coloque la carátula de modo plano con-
tra la unidad principal.
2 Presione la carátula hacia la cara de la
unidad principal hasta que se asiente
firmemente.
Antes de comenzar
Es 19
Sección
Español
01

Black plate (20,1)
<CRD4029-A/N>20
Unidad principal
1Botón EQ
Presione este botón para seleccionar las di-
versas curvas de ecualización.
Presione y mantenga presionado para acti-
var o desactivar la sonoridad.
2Botón DISPLAY
Presione este botón para seleccionar las di-
ferentes visualizaciones.
3Ranura de carga de discos
Introduzca el disco que desea reproducir.
4Botón EJECT
Presione este botón para expulsar un CD
del reproductor de CD incorporado.
5Botón SOURCE
Esta unidad se enciende al seleccionar una
fuente. Presione este botón para visualizar
todas las fuentes disponibles.
6Botón BAND
Presione este botón para seleccionar entre
tres bandas FM y una banda AM, y para
cancelar el modo de control de funciones.
7Botón DETACH
Presione este botón para extraer la carátula
de la unidad principal.
8Botones a/b/c/d
Presione estos botones para utilizar los con-
troles de sintonización por búsqueda ma-
nual, avance rápido, retroceso y búsqueda
de pista. También se usan para controlar las
funciones.
9Botón AUDIO
Presione este botón para seleccionar los di-
versos controles de calidad del sonido.
aBotón LOCAL/BSM
Presione para activar o desactivar la función
local.
Mantenga presionado para activar o desac-
tivar la función SM.
bBotones 16
Presione para la sintonización preajustada.
También se usa para controlar las funcio-
nes.
cBotón CLOCK
Presione este botón para cambiar a la visua-
lización del reloj.
dBotones VOLUME (+/)
Presione para aumentar o disminuir el
volumen.
3
3
3
d
d
d
1
2
4
6
6
6
5
5
5
7
7
7
8
8
9
9
9
a
a
a
b
b
b
c
c
c
Qué es cada cosa
Es
20
Sección
02