Pioneer DEH-P5600MP User manual

Operation Manual
Manual de instrucciones
Multi-CD control High power CD/MP3/WMA/WAV
player with RDS tuner
Reproductor de CD/MP3/WMA/WAV de alta potencia
con sintonizador de RDS y control de CD últiple
DEH-P5630MP
DEH-P5600MP
English Español

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
About this unit 5
About this manual 5
Precautions 5
In case of trouble 5
Features 5
About WMA 6
Protecting your unit from theft 6
Removing the front panel 6
Attaching the front panel 7
Whats What
Head unit 8
ptional remote control 8
Power ON/OFF
Turning the unit on 10
Selecting a source 10
Turning the unit off 10
Tuner
Listening to the radio 11
Introduction of advanced tuner
operation 12
Storing and recalling broadcast
frequencies 12
Tuning in strong signals 12
Storing the strongest broadcast
frequencies 13
RDS
Introduction of RDS operation 1
Switching the RDS display 1
Selecting alternative frequencies 1
Using PI Seek 15
Using Auto PI Seek for preset
stations 15
Limiting stations to regional
programming 15
Receiving traffic announcements 16
Responding to the TP alarm 16
Using PTY functions 16
Searching for an RDS station by PTY
information 16
Using news program interruption 17
Receiving PTY alarm broadcasts 17
Using radio text 17
Displaying radio text 17
Storing and recalling radio text 18
PTY list 19
Built-in CD Player
Playing a CD 20
Introduction of advanced built-in CD player
operation 21
Repeating play 21
Playing tracks in a random order 21
Scanning tracks of a CD 21
Pausing CD playback 22
Using compression and BMX 22
Selecting the search method 22
Searching every 10 track in the current
disc 23
Using disc title functions 23
Entering disc titles 23
Displaying disc titles 2
Using CD TEXT functions 2
Displaying titles on CD TEXT
discs 2
Scrolling titles in the display 2
MP3/WMA/WAV Player
Playing MP3/WMA/WAV 25
Introduction of advanced built-in CD player
(MP3/WMA/WAV) operation 27
Repeating play 27
Playing tracks in a random order 27
Scanning folders and tracks 28
Contents
En
2

Pausing MP3/WMA/WAV playback 28
Using compression and BMX 28
Selecting the search method 29
Searching every 10 track in the current
folder 29
Switching the tag display 29
Displaying text information on MP3/WMA/
WAV disc 29
When playing back an MP3/WMA
disc 29
When playing back a WAV disc 30
Scrolling text information in the display 30
Multi-CD Player
Playing a CD 31
50-disc multi-CD player 31
Introduction of advanced multi-CD player
operation 32
Repeating play 32
Playing tracks in a random order 32
Scanning CDs and tracks 33
Pausing CD playback 33
Using ITS playlists 33
Creating a playlist with ITS
programming 33
Playback from your ITS playlist 3
Erasing a track from your ITS
playlist 3
Erasing a CD from your ITS
playlist 35
Using disc title functions 35
Entering disc titles 35
Displaying disc titles 36
Selecting discs from the disc title
list 36
Using CD TEXT functions 36
Displaying titles on CD TEXT
discs 36
Scrolling titles in the display 36
Using compression and bass emphasis 36
Audio Adjustments
Introduction of audio adjustments 38
Compensating for equalizer curves (EQ-
EX) 38
Setting the sound focus equalizer
(SFEQ) 39
Using balance adjustment 39
Using the equalizer 0
Recalling equalizer curves 0
Adjusting equalizer curves 0
Fine adjusting equalizer curve 0
Adjusting bass and treble 1
Adjusting bass and treble level 1
Selecting bass frequency 1
Selecting treble frequency 2
Adjusting loudness 2
Using subwoofer output 2
Adjusting subwoofer settings 2
Using non fading output 3
Adjusting non fading output level 3
Using the high pass filter 3
Adjusting source levels 3
Initial Settings
Adjusting initial settings 5
Setting the FM tuning step 5
Switching Auto PI Seek 5
Switching the warning tone 5
Switching the auxiliary setting 6
Switching the dimmer setting 6
Setting the rear output and subwoofer
controller 6
Switching the telephone muting/
attenuation 7
Other Functions
Using the AUX source 8
En 3
English
Contents

Selecting AUX as the source 8
Setting the AUX title 8
Setting the level indicator 8
Additional Information
Understanding built-in CD player error
messages 9
CD player and care 9
CD-R/CD-RW discs 50
MP3, WMA and WAV files 50
MP3 additional information 51
WMA additional information 51
WAV additional information 51
About folders and MP3/WMA/WAV files 51
Terms 53
Specifications 55
Contents
En

About this unit
The tuner frequencies on this unit are allo-
cated for use in Western Europe, Asia, the
Middle East, Africa and ceania. Use in other
areas may result in improper reception. The
RDS function operates only in areas with FM
stations broadcasting RDS signals.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this units potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions on this
page and in other sections.
Precautions
!ACLASS 1 LASER PRODUCT label is af-
fixed to the bottom of this unit.
CLASS 1
LASER PRODUCT
!The Pioneer CarStereo-Pass is for use only
in Germany.
!Keep this manual handy as a reference for
operating procedures and precautions.
!Always keep the volume low enough so you
can hear sounds outside of the car.
!Protect this unit from moisture.
!If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.
Features
CD playback
Music CD/CD-R/CD-RW playback is possible.
MP3 file playback
You can play back MP3 files recorded on CD-
R M/CD-R/CD-RW (IS 9660 Level 1/Level 2
standard recordings).
!Supply of this product only conveys a li-
cense for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenue-generating) real time broad-
casting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
via internet, intranets and/or other net-
works or in other electronic content distri-
bution systems, such as pay-audio or
audio-on-demand applications. An inde-
pendent license for such use is required.
For details, please visit
http://www.mp3licensing.com.
WMA file playback
You can play back WMA files recorded on CD-
R M/CD-R/CD-RW (IS 9660 Level 1/Level 2
standard recordings).
Before You Start
En 5
English
Section
01

WAV file playback
You can play back WAV files recorded on CD-
R M/CD-R/CD-RW (IS 9660 Level 1/Level 2
standard recordings).
About WMA
The Windows Media"logo printed on the box
indicates that this unit can playback the WMA
data.
WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
Notes
!With some applications used to encode WMA
files, this unit may not operate correctly.
!With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
Protectin your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
!If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
!You can turn off the warning tone. See
Switching the warning tone on page 45.
Important
!Never use force or grip the display and the
buttons tightly when removing or attaching.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Removin the front panel
1 Press OPEN to open the front panel.
2 Grip the left side of the front panel and
pull it gentl outward.
Take care not to grip it tightly or to drop it.
3 Put the front panel into the protective
case provided for safe keeping.
Before You Start
En
6
Section
01

Attachin the front panel
%Replace the front panel b holding it
upright to this unit and clipping it securel
into the mounting hooks.
Before You Start
En 7
English
Section
01

Head unit
1DISPLAY button
Press to select different displays.
2TA button
Press to turn traffic announcements func-
tion on or off.
3BAND button
Press to select among three FM and MW/
LW bands and cancel the control mode of
functions.
4OPEN button
Press to open the front panel.
5FUNCTION button
Press to select functions.
6a/b/c/dbuttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
7AUDIO button
Press to select various sound quality con-
trols.
8EQ-EX button
Press and hold to switch between EQ-EX
and SFEQ functions. Press to operate each
function.
916 buttons
Press for preset tuning and disc number
search when using a multi-CD player.
aEQ button
Press to select various equalizer curves.
bSOURCE button
This unit is turned on by selecting a source.
Press to cycle through all of the available
sources.
cVOLUME
When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To re-
tract VOLUME, press it again. Rotate to
increase or decrease the volume.
Optional remote control
The steering remote control CD-SR100 is sold
separately.
2
5
6
7
89a
134
b
c
Whats What
En
8
Section
02

peration is the same as when using the but-
ton on the head unit. See the explanation of
the head unit about the operation of each but-
ton with the exception of ATT, which is ex-
plained below.
dATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
eVOLUME button
Press to increase or decrease the volume.
e
d
7
5
b
6
3
Whats What
En 9
English
Section
02

Turnin the unit on
%Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
Selectin a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in this unit (refer to page 20).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
TunerTelevisionBuilt-in CD pla er
Multi-CD pla erExternal unit 1External
unit 2AUX
Notes
!In the following cases, the sound source will
not change:
When a unit corresponding to each source
is not connected to this unit.
When no disc is set in this unit.
When no magazine is set in the multi-CD
player.
When the AUX (auxiliary input) is set to off
(refer to page 46).
!External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!When this units blue/white lead is connected
to the cars auto-antenna relay control term-
inal, the cars antenna extends when this
units source is turned on. To retract the an-
tenna, turn the source off.
Turnin the unit off
%Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En
10
Section
03

Listenin to the radio
3
1
2
4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This units AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 14).
1Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
2Preset number indicator
Shows what preset has been selected.
3Frequenc indicator
Shows to which frequency the tuner is
tuned.
4Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
1 Press SOURCE to select the tuner.
Press SOURCE until you see TUNER dis-
played.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1,F2,F3 for FM or MW/LW.
4 To perform manual tuning, press cor
dwith quick presses.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and hold
cor dfor about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by pressing either
cor dwith a quick press.
#If you press and hold cor dyou can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.
Tuner
En 11
English
Section
0

Introduction of advanced
tuner operation
1
2
3
1LOC indicator
Shows when local seek tuning is on.
2Preset number indicator
Shows what preset has been selected.
3Function displa
Shows the function status.
%Press FUNCTION to displa the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)REG (regional)
LOCAL (local seek tuning)program type
selection (PTY)TA (traffic announcement
standby)AF (alternative frequencies search)
NEWS (news program interruption)
#To return to the frequency display, press
BAND.
#If MW/LW band is selected, you can only se-
lect BSM or LOCAL.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Storin and recallin
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
%When ou find a frequenc that ou
want to store in memor press a preset
tuning button 16 and hold until the preset
number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button 16the radio station frequency is
recalled from memory.
Notes
!Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be
stored in memory.
!You can also use aand bto recall radio sta-
tion frequencies assigned to preset tuning
buttons 16.
Tunin in stron si nals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Press FUNCTION to select LOCAL.
Press FUNCTION until LOCAL appears in the
display.
2 Press ato turn local seek tuning on.
Local seek sensitivity (e.g., LOCAL 2) appears
in the display.
Tuner
En
12
Section
0

3 Press cor dto set the sensitivit .
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM: LOCAL 1LOCAL 2LOCAL 3
LOCAL 4
MW/LW: LOCAL 1LOCAL 2
The LOCAL 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
4 When ou want to return to normal
seek tuning, press bto turn local seek tun-
ing off.
LOCALOFF appears in the display.
Storin the stron est
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the
display.
2 Press ato turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in
order of their signal strength. When finished,
BSM stops flashing.
#To cancel the storage process, press b.
Note
Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using 16.
Tuner
En 13
English
Section
0

Introduction of RDS operation
1
4
3
2
RDS (radio data system) is a system for provid-
ing information along with FM broadcasts.
This inaudible information provides such fea-
tures as program service name, program type,
traffic announcement standby and automatic
tuning, intended to aid radio listeners in find-
ing and tuning in to a desired station.
1Program service name
Shows the name of broadcast program.
2News ( ) indicator
Shows when the set news program is re-
ceived.
3TEXT indicator
Shows when the radio text is received.
4TP ( ) indicator
Shows when a TP station is tuned in.
%Press FUNCTION to displa the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)REG (regional)
LOCAL (local seek tuning)program type
selection (PTY)TA (traffic announcement
standby)AF (alternative frequencies search)
NEWS (news program interruption)
#To return to the frequency display, press
BAND.
#If MW/LW band is selected, you can only se-
lect BSM or LOCAL.
Notes
!If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the frequency display.
!RDS service may not be provided by all sta-
tions.
!RDS functions like AF and TA are only active
when your radio is tuned to an RDS station.
Switchin the RDS display
When you tune in an RDS station its program
service name is displayed. If you want to know
the frequency you can.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Program service namePTY information
Frequency
PTY (program type ID code) information is
listed on page 19.
#PTY information and the frequency of the cur-
rent station appears on the display for eight sec-
onds.
#If a PTY code of zero is received from a station
or the signal is too weak for this unit to pick up
the PTY code, you cannot switch to PTY infoma-
tion display. In this case, if you have selected the
PTY information display, the display will be chan-
ged blank.
Selectin alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
RDS
En
1
Section
05

blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
!AF is on as a default.
1 Press FUNCTION to select AF.
Press FUNCTION until AF appears in the dis-
play.
2 Press ato turn AF on.
Press aand AF :ON is displayed.
3 Press bto turn AF off.
Press band AF :OFF is displayed.
Notes
!nly RDS stations are tuned in during seek
tuning or BSM when AF is on.
!When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the stations AF list. (This is only
available when using presets on the F1 or F2
bands.) No preset number appears on the dis-
play if the RDS data for the station received
differs from that for the originally stored sta-
tion.
!Sound may be temporarily interrupted by an-
other program during a AF frequency search.
!AF can be turned on or off independently for
each FM band.
Usin PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI SEEK is displayed and the output is
muted. The muting is discontinued after com-
pletion of the PI Seek, whether or not a differ-
ent station is found.
Usin Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
!The default setting for Auto PI Seek is off.
See Switching Auto I Seek on page 45.
Limitin stations to re ional
pro rammin
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Press FUNCTION to select REG.
Press FUNCTION until REG appears in the dis-
play.
2 Press ato turn the regional function
on.
Press aand REG :ON is displayed.
3 Press bto turn the regional function
off.
Press band REG :OFF is displayed.
Notes
!Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
!The preset number may disappear on the dis-
play if the tuner tunes in a regional station
which differs from the originally set station.
!The regional function can be turned on or off
independently for each FM band.
RDS
En 15
English
Section
05

Receivin traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP ( ) indica-
tor will light.
2 Press TA to turn traffic announcement
standb on.
Press TA and TA ON appears in the display.
The tuner will standby for traffic announce-
ments.
#To turn traffic announcements standby off,
press TA again.
3 Use VOLUME to adjust the TA volume
when a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
#You can also cancel the announcement by
pressing SOURCE,BAND,a,b,cor dwhile a
traffic announcement is being received.
Notes
!You can also turn on or off TA function in the
menu that appears with the pressing of
FUNCTION.
!The system switches back to the original
source following traffic announcement recep-
tion.
!nly TP and enhanced other networks TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Respondin to the TP alarm
When a TP or enhanced other networksTP
station is lost due to a weak signal the TP
() indicator is extinguished and a series of
short beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other networks TP station.
%When listening to the tuner, tune in an-
other TP or enhanced other networksTP
station.
Usin PTY functions
You can tune in a station by using PTY infor-
mation.
Searchin for an RDS station by
PTY information
You can search for general types of broadcast-
ing programs, such as those listed on page
19.
1 Press FUNCTION to select program t pe
selection (PTY).
Press FUNCTION until program type appears
in the display.
RDS
En
16
Section
05

2 Press cor dto select a program t pe.
There are four program types:
NEWS/INFPOPULARCLASSICS
OTHERS
3 Press ato begin the search.
When you press athe program type name in
the display begins to flash. The unit searches
for a station broadcasting that program type.
When a station is found its program service
name is displayed.
#To cancel the search, press b.
Notes
!The program of some stations may differ from
that indicated by the transmitted PTY.
!If no station is broadcasting the type of pro-
gram you searched for, NOTFOUND is dis-
played for about two seconds and then the
tuner returns to the original station.
Usin news pro ram interruption
When a news program is broadcast from a
PTY code news station the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
%Press TA and hold to turn on news pro-
gram interruption.
Press TA until NEWS ON appears in the dis-
play.
#To turn off news program interruption, press
TA and hold until NEWS OFF appears in the dis-
play.
#A news program can be cancelled by pressing
TA.
#You can also cancel the news program by
pressing SOURCE,BAND,a,b,cor dwhile a
news program is being received.
Note
You can also turn on or off news program in the
menu that appears with the pressing of
FUNCTION.
Receivin PTY alarm broadcasts
PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
!An emergency announcement can be can-
celled by pressing TA.
!You can also cancel an emergency an-
nouncement by pressing SOURCE,BAND,
a,b,cor d.
Usin radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
!The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displayin radio text
You can display the currently received radio
text and the three most recent radio text.
1 Press DISPLAY and hold to displa radio
text.
Radio text for the currently broadcasting sta-
tion is displayed.
RDS
En 17
English
Section
05

#You can cancel radio text display by pressing
BAND.
#When no radio text is received, NO TEXT is
displayed.
2 Press cor dto recall the three most re-
cent radio text.
Pressing cor dswitches between the current
and the three radio text data displays.
#If there is no radio text data in memory the dis-
play will not change.
3 Press aor bto scroll.
Press ato go to the beginning. Press bto
scroll the radio text data.
Storin and recallin radio text
You can store data from up to six radio text
transmissions at buttons 16.
1 Displa the radio text ou want to
store in memor .
Refer to Displaying radio text on the previous
page.
2 Press an of 16 and hold to store the
selected radio text.
The memory number will display and the se-
lected radio text has been stored in memory.
The next time you press the same 16button
in the radio text display the stored text is re-
called from memory.
RDS
En
18
Section
05

PTY list
General Specific Type of program
NEWS/INF NEWS News
AFFAIRS Current affairs
INFO General information and advice
SPORT Sports
WEATHER Weather reports/meteorological information
FINANCE Stock market reports, commerce, trading, etc.
POPULAR POP MUS Popular music
ROCK MUS Contemporary modern music
EASY MUS Easy listening music
OTH MUS Non categorized music
JAZZ Jazz
COUNTRY Country music
NAT MUS National music
OLDIES ldies music, golden oldies
FOLK MUS Folk music
CLASSICS L. CLASS Light classical music
CLASSIC Serious classical music
OTHERS EDUCATE Educational programs
DRAMA All radio plays and serials
CULTURE National or regional culture
SCIENCE Nature, science and technology
VARIED Light entertainment
CHILDREN Childrens
SOCIAL Social affairs
RELIGION Religion affairs or services
PHONE IN Phone In
TOURING Travel programs, not for announcements about traffic problems
LEISURE Hobbies and recreational activities
DOCUMENT Documentaries
RDS
En 19
English
Section
05

Playin a CD
1
2
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1Pla time indicator
Shows the elapsed playing time of the cur-
rent track.
2Track number indicator
Shows the track currently playing.
1 Press OPEN to open the front panel.
CD loading slot appears.
#After a CD has been inserted, press SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT button
#You can eject a CD by pressing EJECT.
#To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse,
press and hold cor d.
#If you select the search method to ROUGH,
pressing and holding cor denables you to
search every ten track in the current disc. (Refer
to Selecting the search method on page 22.)
6 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
!aand bcan be operated when MP3, WMA or
WAV is playing.
!If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page
49.
Built-in CD Player
En
20
Section
06