Pioneer KEH-1033 User manual

Black plate (1,1)
Operation Manual
Mode demploi
High power Cassette player with FM/MW/LW tuner
Lecteur de cassette de grande puissance avec synto-
niseur FM/MW/LW (PO-GO)
KEH-1033
KEH-1032
English
<CZR2964-A>1
NederlandsItalianoFrançaisDeutschEspañol
All manuals and user guides at all-guides.com
all-guides.com

Black plate (2,1)
<CZR2964-A>2
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
About this unit 3
About this manual 3
Precautions 3
In case of trouble 3
Protecting your unit from theft 3
Removing the front panel 3
Attaching the front panel 4
Whats What
Head unit 5
Po er ON/OFF
Turning the unit on 6
Selecting a source 6
Turning the unit off 6
Tuner
Listening to the radio 7
Storing and recalling broadcast
fre uencies 7
Tuning in strong signals 7
Storing the strongest broadcast
fre uencies 8
Cassette Player
Playing a tape 9
Radio intercept 9
Audio Adjustments
Introduction of audio adjustments 10
Using balance adjustment 10
Using the BTB (bass treble booster) 10
Adjusting BTB 11
Adjusting loudness 11
Adjusting source levels 11
Initial Settings
Adjusting initial settings 12
Setting the clock 12
Setting the FM tuning step 12
Additional Information
Turning the clock display on or off 13
Cassette player 13
Cassette tapes 13
Cleaning the playback head 13
Specifications 14
Contents
En
2
All manuals and user guides at all-guides.com

Black plate (3,1)
<CZR2964-A>3
About this unit
This product complies with the EMC Directives
(89/336/EEC, 92/31/EEC) and CE Marking Di-
rective (93/68/EEC).
The tuner fre uencies on this unit are allo-
cated for use in Europe, Asia, the Middle East,
Africa and Oceania. Use in other areas may re-
sult in improper reception.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this productspo-
tential and to maximize your listening enjoy-
ment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions on this
page and in other sections.
Precautions
!The Pioneer CarStereo-Pass is for use only
in Germany.
!Keep this manual handy as a reference for
operating procedures and precautions.
!Always keep the volume low enough so you
can hear sounds outside of the car.
!Protect this product from moisture.
!If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
!Keep the front panel closed while driving.
Important
!Never use force or grip the display and the
buttons tightly when removing or attaching.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press DETACH to release the front
panel.
Press DETACH and the right side of the panel
is released from the head unit.
2 Grab the front panel and remove.
Grab the right side of the front panel and pull
away to the left. The front panel will be de-
tached from the head unit.
3 Put the front panel into the protective
case provided for safe keepin .
Before You Start
En 3
English
Section
01
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Black plate (4,1)
<CZR2964-A>4
Attaching the front panel
1 Place the front panel flat a ainst the
head unit.
2 Press the front panel into the face of
the head unit until it is firmly seated.
Before You Start
En
4
Section
01
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Black plate (5,1)
<CZR2964-A>5
Head unit
1SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all of the available
sources.
2RI button
Press to turn radio intercept on or off.
3CLOCK button
Press to change to the clock display.
4TAPE EJECT button
Press to eject a tape from your cassette
player.
5m/nbuttons
Press to fast forward or rewind the tape.
6LOCAL/BSM button
Press to turn local function on or off when
tuner is selected as a source.
Press and hold to turn BSM function on or
off when tuner is selected as a source.
7BAND button
Press to select among three FM and MW/
LW bands and cancel the control mode of
functions.
8BTB button
Press to select various BTB (bass treble
booster) setting.
9AUDIO button
Press to select various sound uality con-
trols.
aDETACH button
Press to remove the front panel from the
head unit.
b16 buttons
Press for preset tuning.
cc/dbuttons
Press to do manual seek tuning. Also used
for controlling functions.
dLOUDNESS button
Press to turn loudness on or off.
eVOLUME button
Press to increase or decrease the
volume.
12
3
456
7
8
9
abcd
e
Whats What
En 5
English
Section
02
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Black plate (6,1)
<CZR2964-A>6
Turning the unit on
%Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the cassette player, load a cas-
sette tape in this unit (refer to page 9).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
TunerCassette player
Note
When no cassette is set in this unit, cassette
source will not change.
Turning the unit off
%Press SOURCE and hold until the unit
turns off.
Po er ON/OFF
En
6
Section
03
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com
all-guides.com

Black plate (7,1)
<CZR2964-A>7
Listening to the radio
123 4
1Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
2Frequency indicator
Shows to which fre uency the tuner is
tuned.
3Stereo (5) indicator
Shows that the fre uency selected is being
broadcast in stereo.
4Preset number indicator
Shows what preset has been selected.
1 Press SOURCE to select the tuner.
2 Use VOLUME to adjust the sound level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1,F2,F3 for FM or MW/LW.
4 To perform manual tunin , press cor
dwith quick presses.
The fre uencies move up or down step by
step.
5 To perform seek tunin , press and hold
cor dfor about one second and release.
The tuner will scan the fre uencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by pressing either
cor dwith a uick press.
#If you press and hold cor dyou can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the fre uency selected is being broadcast
in stereo the stereo (5) indicator will light.
Storing and recalling
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
fre uencies for later recall with the touch of a
button.
%When you find a frequency that you
want to store in memory press a preset
tunin button 16 and hold until the preset
number stops flashin .
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station fre uency has been
stored in memory.
The next time you press the same preset tun-
ing button 16the radio station fre uency is
recalled from memory.
Note
Up to 18 FM stations, 6 for each of the three FM
bands, and 6 MW/LW stations can be stored in
memory.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
Tuner
En 7
English
Section
04
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Black plate (8,1)
<CZR2964-A>8
1 Press LOCAL/BSM to turn local seek
tunin on.
LOC appears in the display.
2 When you want to return to normal
seek tunin , press LOCAL/BSM to turn local
seek tunin off.
Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
uencies under preset tuning buttons 16and
once stored there you can tune in to those fre-
uencies with the touch of a button.
%Press LOCAL/BSM and hold until the
BSM turns on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast fre uencies will be
stored under preset tuning buttons 16in
order of their signal strength. When finished,
BSM stops flashing.
#To cancel the storage process, press
LOCAL/BSM.
Note
Storing broadcast fre uencies with BSM may re-
place broadcast fre uencies you have saved
using 16.
Tuner
En
8
Section
04
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Black plate (9,1)
<CZR2964-A>9
Playing a tape
1
1Tape direction indicator
Shows the direction of the tape transport.
1 Insert a cassette tape into the cassette
loadin slot.
Playback will automatically start.
Cassette loading slot
#You can eject a cassette tape by pressing
TAPE EJECT.
2 After a cassette tape has been inserted,
press SOURCE to select the cassette player.
Press SOURCE until cassette player is selected
as the source.
3 Use VOLUME to adjust the sound level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
4 To perform fast forward or rewind,
press mor n.
#You can cancel fast forward or rewind by
pressing mor nin the opposite direction
lightly.
5 To chan e the direction of the tape
transport, press mand nsimulta-
neously.
Note
Do not insert anything other than a cassette tape
into the cassette loading slot.
Radio intercept
Radio intercept allows you to listen to the
radio during tape fast-forwarding/rewinding.
%Press RI to turn radio intercept on or
off.
Cassette Player
En 9
English
Section
05
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Black plate (10,1)
<CZR2964-A>10
Introduction of audio
adjustments
123
1BTB indicator
Shows when the BTB other than FLAT is se-
lected.
2Audio display
Shows the audio adjustments status.
3LOUD indicator
Appears in the display when loudness is
turned on.
%Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)BAS (bass adjust-
ment)TRE (treble adjustment)LOUD
(loudness)SLA (source level adjustment)
#When selecting the FM tuner as the source,
you cannot switch to SLA.
#To return to the display of each source, press
BAND.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
Press AUDIO until FAD appears in the display.
#If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press VOLUME up/+ or down/to ad-
just front/rear speaker balance.
Each press of VOLUME up/+ or down/
moves the front/rear speaker balance towards
the front or the rear.
FAD F15 FAD R15 is displayed as the front/
rear speaker balance moves from front to rear.
#FAD 0 is the proper setting when only two
speakers are used.
3 Press cor dto adjust left/ri ht speaker
balance.
When you press cor d,BAL 0 is displayed.
Each press of cor dmoves the left/right
speaker balance towards the left or the right.
BAL L 9 BAL R 9 is displayed as the left/right
speaker balance moves from left to right.
Using the BTB (bass treble
booster)
There are five stored BTB settings such as
DYNAMIC,POWER,MAX,CUSTOM and
FLAT that can easily recall at any time.
!CUSTOM is an adjusted BTB setting that
you create.
!When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check effect of the BTB settings
by switching alternatively between FLAT
and set BTB setting.
%Press BTB to select the desired BTB set-
tin .
Press BTB repeatedly to switch between the
following BTB setting:
MAXCUSTOMFLATDYNAMIC
POWER
Audio Adjustments
En
10
Section
06
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com