
CT-S550S
2
NSP MOTHER UNIT RWM1908 RWM2053 RWM2053
P2–44 MAIN UNIT RWZ3857 RWZ4318 RWZ4318
P2–45 DOLBY S UNIT RWX1120 RWX1120 RWX1120
P2–23 FL UNIT RWZ3859 RWZ4319 RWZ4319
P2–34 OPSW UNIT RWZ3861 RWZ4320 RWZ4320 ∗1
P2–52 NSP POCM UNIT RWZ3867 RWZ4321 RWZ4321 ∗2
P2–37 NSP TRN 2 UNIT RWZ3865 RWZ4322 RWZ4322 ∗3
POWER SW UNIT Not used RWX1150 RWX1150 ∗4 No. 1, ∗5
P2–1 Name Plate PAM1608 PAM1776 PAM1776
P2–2 Front Panel RAH2719 RAH2872 RAH2872
P2–14 Power Cap RAC1998 Not used Not used
P2–16 Panel Stay REA1196 REA1289 REA1289
P2–41 NSP Main Chassis RNB1113 RNB1132 RNB1132
P2–36 NSP TRN 1 PCB RNZ3004 RNZ3316 RNZ3316
P2–46 Rear Panel RNA2034 RNA2214 RNA2214
P2–48 AC Power Cord PDG1043 PDG1058 PDG1058
P2–66 Packing Case RHG1737 RHG1880 RHG1880
P2–70 Operating Instructions RRD1185 RRD1204 Not used
(French/Italian/Dutch/Swedish/
Spanish/Portuguese)
P2–71 Operating Instructions RRE1136 RRE1168 RRE1168
(English/German)
P2–73 NSP Warranty Card ARY7009 ARY7022 ARY7022
NSP PCB Holder Not used AEC–703 AEC–703 ∗4 No. 2
Power Button Not used RAC2218 RAC2218 ∗4 No. 3
1. CONTRAST OF MISCELLANEOUS PARTS
CONTRAST TABLE
Part No. Remarks
CT-S550S CT-S550S CT-S550S
HYXJ HYXJ7 HYXJ/GR7
CT-S550S/HYXJ7, HYXJ/GR7 and CT-S550S/HYXJ are constructed the same except for the following:
*1: Although RWZ4320 and RWZ3861 are different in part number, they have same service parts.
*2: Although RWZ4321 and RWZ3867 are different in part number, they have same service parts.
*3: Although RWZ4322 and RWZ3865 are different in part number, they have same service parts.
*4: The numbers in the remarks column correspond to the numbers on the " EXPLODED VIEWS ".
*5: Refer to " PCB PARTS LIST", " 2. SCHEMATIC DIAGRAM" and " 3. PCB CONNECTION DIAGRAM".
Ref.
No. Mark Symbol and Description
NOTES : ÷Parts marked by “ NSP ” are generally unavailable because they are not in our Master Spare Parts List.
÷The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
÷When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex. 1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by
J = 5%, and K = 10%).
560 Ω=56 ×101 =561................................................... RD1/4PU 561J
47k Ω=47 ×10 3=473 .................................................. RD1/4PU 473J
0.5 Ω=R50 ...................................................................... RN2H Â50K
1 Ω=1R0 ......................................................................... RS1P 1Â0K
Ex. 2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω=562 ×10 1=5621 ........................................... RN1/4PC 5621F
÷Reference Nos. indicate the pages and Nos. in the service manual for the base model.