Pioneer DASH/T3 PLUS Series User manual

1
10.1”mPOS
DASH/T3 PLUS
User Menu
Series Model No:
DASH10EB
DASH10AB

2
V0.2
Attention
All other product names or trademarks are the property of their respective owners.
Warning Users:
1. Use of excessive fear of damage to eyesight
2. Use 30 minutes to rest 10 minutes
3. Children under 2 years old do not look at the screen; 2 years old and more than a
day to see the screen not more than 1 hours
Global security Announcement
CE Conformity Statement
Radio products with the CE alert marking comply with the R&TTE Directive
(1999/5/EC) issued by the Commission of the European Community. Compliance
with this directive implies conformity to the following European Norms (in brackets
are the equivalent international standards).
• EN 60950-1 (IEC60950-1) - Product Safety
• EN 300 328 Technical requirement for radio equipment
• ET S301 489 General EMC requirements for radio equipment
Products that contain the radio transmitter are labeled with CE alert marking and
may also carry the CE logo.
MIT-W101 User Manual
FCC Compliance Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
• Reorient or relocate the receiving antenna.

3
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to
operate this equipment. (Example: use only shielded interface cables when
connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that
may cause undesired operation.
15.21
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment for body-worn configuration in direct contact to the
phantom.
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment.

4
WEEE
EN

5
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more
information about recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you purchased the product.
NCC Warning
Management methods of low power radio-radiated motor
Fourth, The use of this product should be avoided to affect the vicinity of the radar
system operation.
12th, After the type of qualified low power RF motor, without permission, the
company, firm or user may not arbitrarily change the frequency, increase power or
change the original design features and functions.
14th, The use of a low-power RF motor shall not affect the safety of the flight and
interfere with the lawful communication, and should be deactivated immediately
upon discovery of interference, and shall be improved to no interference. Legal
communication in the preceding paragraph means the radio letter of Operation
according to the telecommunication regulations. Low-power RF motors must endure
the interference of legitimate communications or industrial, scientific and medical
Radio-radiated electrical equipment.
Technical Supporting

6
1. Advantech website http://support.advantech.com, where you can find the latest
information about the product.
2. If you need additional help, please contact your reseller, sales representative or
Advantech Customer Service Center for technical Support. Before you call, please
prepare the following information:
- Product Name and Serial Number
- Accessory Description
- Software Information（OS type，Version，Application etc.）
- Issue detail description
- Any error message or detail wordings
Safety Notification
1. Please read these security instructions carefully.
2. Keep this user's manual for future reference.
3. Disconnect this device from the AC power outlet before cleaning. Do not use
liquid or spray detergent for cleaning.
4. Keep the equipment away from dangerous areas.
5. Place the equipment on a reliable surface during installation. Falling or falling
may cause damage.
6. Do not place this device in an environment where the storage temperature is
below -10℃or above 60 ℃, or the device may be damaged.
7. Make sure that the power supply voltage is correct before connecting the device
to the power outlet.
8. Place the AC power transformer where it cannot be trampled. Do not place
anything on the power transformer.
9. Note All considerations and warnings on the device.
10. If the device is not in use for a long time, disconnect it from the power supply to
prevent instantaneous overvoltage damage to the device.
11. Never pour any liquid into the Msr/ic card reader slot in the DASH/T3 PLUS series.
This can cause fire or shock.
12. Do not open or disassemble the device. For security reasons, the device can only
be opened by qualified maintenance personnel.
13. If any of the following conditions are true, please check the equipment by the
maintenance personnel:
a. The power transformer plug is damaged.
b. The liquid penetrates into the device.
c. The equipment has been exposed to humid environments.
d. The device is not working properly or is not working according to the user's
manual.

7
e. There are obvious signs of breakage in the equipment.
Battery Safety
Notification
1. If you replace the incorrect battery type, there is a risk of explosion.
2. Do not attempt to disassemble the calculator or its attachments.
3. Only qualified personnel are allowed to replace the battery.
4. Do not place the battery in the fire and check with the local authorities for
instructions.
DASH/T3 PLUS equipped with standard battery pack only and TCL PR-2770E2N 7,000
mAH Lithium-ion batteries. Use of other batteries may cause a fire or explosion.
Battery Charging Notification
When charging a lithium ion battery pack, be sure to consider the ambient
temperature. The method is more effective at normal room temperature or slightly
cooler. Be sure to charge the battery within the specified range of 0°c to 40°c.
Charging a battery outside a specified range can damage the battery and shorten its
charging life cycle.
Storage and security Notifications
Although rechargeable lithium-ion batteries may not be used for several months,
their capacity may be depleted due to the build-up of internal resistors. If this
happens, they will need to recharge before use. Lithium-ion batteries can be stored
at temperatures between 10 ℃to 60 ℃, but they can be depleted faster near the
extreme temperatures of the range. It is recommended that the DASH/T3 Plus be
stored in a normal indoor temperature range.
Battery Recycling

8

9
TABLE OF CONTENT
1 Product Introduction .............................................................................................11
1.1 Common Symbols in the manual................................................................................... 12
1.2 Product Function and Feature....................................................................................... 12
1.3 Packing Content............................................................................................................. 12
1.4 Product SPEC ................................................................................................................. 13
1.4.1 Technical SEPC ..................................................................... 13
1.4.2 Product Outlooking ................................................................ 14
1.5 DASH/T3 PLUS Interface................................................................................................ 14
1.5.1 Front ................................................................................. 14
1.5.2 Back.................................................................................. 15
1.5.3 Right ................................................................................. 15
1.5.4 Left................................................................................... 16
1.5.5 Top ................................................................................... 16
1.5.6 Bottom............................................................................... 16
2 Starting ....................................................................................................................17
2.1 Charging......................................................................................................................... 17
2.2 Power On....................................................................................................................... 17
2.3 StandBy Mode ............................................................................................................... 17
2.4 Computer Operation ..................................................................................................... 18
2.5 LED Indicator Status ...................................................................................................... 18
3 Setting......................................................................................................................19
3.1 Windows 10 IoT Enterprise Setting ............................................................................... 19
3.2 Android 6.0.1 Setting..................................................................................................... 19
4 Application Implement .........................................................................................22
4.1 Application Installation.................................................................................................. 22
4.1.1 Windows 10 IoT Enterprise OS Installation ..................................... 23

10
4.1.2 Android 6.0.1 OS Installation..................................................... 24
5 Computer Maintenance.........................................................................................25
5.1 LCD Monitor Maintenance ............................................................................................ 25
5.2 DASH/T3 PLUS Cleaning................................................................................................. 25
5.3 Trouble Shooting ........................................................................................................... 25
5.4 ENERGY STAR................................................................................................................. 26
6 Declaration of the Presence Condition of Restricted Substance ...................28
7 DASH/T3 PLUS Docking Installation ....................................................................29

11
1 Product Introduction
Thank you for purchasing DASH/T3 PLUS computer。
DASH/T3 PLUS Series SKU Table
DASH10EB
DASH10AB
4G/64G Windows
4G/64G Android
a/b/g/n/ac
a/b/g/n/ac
The product combines stylish design, reliable performance and powerful
functionality to meet your wide range of working requirements. This user's manual
outlines the basic information you need to know to set up and use DASH/T3 Plus. If
you have any further questions or questions, please contact our technical Support
team via our website:

12
1.1 Common symbols in the manual
Indicates the information that must be adhered to. This
may result in personal injury or damage to the product.
Represents information that provides assistance that can
help you to use this product more smoothly.
1.2 Product Function and Feature
•Stylish and functional with only 8.5 mm thickness
• Low power consumption Intel® ATOM ™process for mobile purpose.
• Build-in WLAN/Bluetooth function
•10.1 “WXGA TFT IPS LCD Panel and Capacitive 10-point touch supporting
•Micro USB 2.0 port
•DASH10EB is 4G/64G Windows WiFi a/b/g/n/ac
•DASH10AB is 4G/64G Android WiFi a/b/g/n /ac
1.3 Packing Content
When you receive DASH/T3 Plus, make sure that all of the following items are in the
package. If you are missing any of these items, please contact the distributor
immediately.
• DASH/T3 PLUS Computer
• Quick Installation guide
• Power Adaptor

13
1.4 Product SPEC
1.4.1 Technical SPEC
Product SKU
DASH10EB
DASH10AB
Processor
Intel Cherry Trail Z8350 1.92GHz
OS
Windows 10
Android6.0
Memory
4GB DDR3L
4GB DDR3L
Storage
64GB eMMC
Monitor
10.1" 1280x800 IPS；G+G, 10 points
Communication Module
WiFi 802.11 a/b/g/n/ac
WiFi 802.11 a/b/g/n/ac
BT4.0
BT4.0
G-Sensor, Gyroscope, Light Sensor
Camera
Rear 5M(AF)
Front 2M(FF)
Button
One Power Button
One Volume up/down Button
LED
Charging: Orange
I/O
1x DC-IN jack
1xAudio jack (3.5mm,2 in1)
1x USB 3.0 port
1x Micro USB port(USB 2.0)
1x Micro HDMI Port
1x Micro SD Card Slot
1x Pogo Pin(9Pin)
Environ
ment
Operation Temp.
0 ~35 ℃
Charging Temp.
0 ~35 ℃
Storage Temp.
-10 ~60 ℃
Operation Humidity
0%~85%
Dimension/Weight
W259 x L170 x 8.5mm
Power
Power Adapter 5V7A
Li-ion polymer battery, 3.7v@7000 mAh

14
1.4.2 Product Outlooking
DASH/T3 PLUS series are with the same size.
1.5 DASH/T3 PLUS Interface
1.5.1 Front
No.
Component
1
Front Camera
2
Light Sensor Module
1
2

15
1.5.2 Back
No.
Component
1
Rear Camera
1.5.3 Right
No.
Component
1
Powerhole
2
Microphone
3
Micro SD
4
Micro USB
5
Micro HDMI
6
USB3.0
7
Earphone
1
1
2
3
4
5
6
7

16
1.5.4 Left
1.5.5 TOP
No.
Component
1
Volume Adjustment
2
Power Button
1.5.6 Bottom
No.
Component
1
Pogo Pin (to contact with Docking)
2
Keyboard Guidepin
2
1
1
2
2

17
2 Starting
2.1 Charging
To recharge the DASH/T3 PLUS 's built-in battery, connect the power supply
transformer to the power hole interface on the DASH/T3 PLUS.
Since the battery charge may drop during delivery,
please charge at least one hour before starting the first
boot.
Do not use I/O interface when charging
2.2 Power On
Continuous Press the power button for more than 3 seconds to open DASH/T3 PLUS.
2.3 Standby Mode
When DASH/T3 Plus is running, press the power button for 1 seconds to put the
device into standby mode to conserve electricity. The panel backlight is turned off,
and the power button is pressed again to enable backlight and resume normal
operation.
Power Button
Power hole

18
2.4 Computer Operation
DASH/T3 PLUS is with 10.1”Capacitive Touch Panel。You can contact the panel
directly with your finger to manipulate the computer.
2.5 LED Indicator Status
One LED indicator on DASH/T3 PLUS:
Power LED Indicator
DASH/T3 PLUS Power LED indicator is mono color: Orange.
Operation Space

19
3 Setting
Wireless base stations must be purchased prior to use of
wireless networks. Please contact your wireless network
equipment supplier to install and set up a wireless base
station.
The screenshot attached to this manual is used for
reference. The actual screen may vary depending on your
operating system or the version of the preinstalled
software.
3.1 Windows 10 IoT Enterprise Setting
Windows 10 IoT Enterprise Main Screen
No.
Function
1
2
3
4
5

20
1
Open Program
2
Battery Status
3
WIFI
4
Volume Adjustment
5
Open Keyboard
3.2 Android 6.0.1 Setting
Android 6.0.1 Screen
No.
功能
1
Go Back
2
Main Screen
3
Background Program
4
Open Program
1
2
3
4