Pioneer EXR8PISEMJ553BTK User manual

Operating Instructions
SE-MJ553BT
WIRELESS STEREO HEADPHONES

En
2
Thank you for buying this Pioneer product. Please read through these operating
instructions so you will know how to operate your model properly.
Main Features
Wireless music enjoyment
• Wireless music enjoyment on Bluetooth devices (smart phones and other cell
phones, digital music players, etc.) *1
For operating details consult the user’s manual for the device to be connected.
• Allows control of play, stop, forward and reverse selection. *2
Hands-free communication
• Hands-free communication is possible even with the Bluetooth telephone placed
in your bag or briefcase. *3
*1 The corresponding Bluetooth device must support the A2DP profile.
*2 The corresponding Bluetooth device must support the AVRCP profile. Also,
remote control operation cannot be guaranteed for all devices.
*3 The corresponding Bluetooth device must support the HSP or HFP profile.
Bluetooth device : Smartphone
Bluetooth device : Smartphone
Bluetooth device :
Digital music player
Other digital music player +
Bluetooth audio transmitter
(available commercially)
＋
Glossary
A2DP : High-quality musical contents transmission profile
HSP : Communication/cell-phone operation profile
HFP : Hands-free communication/cell-phone operation profile
AVRCP : AV components remote control profile
1. Set Contents
Confirm the presence of all parts and components before use.
1 :Headphones
2 :Micro-USB cable
3 :Warranty (Europe / U.S.A. and Canada / Japan)
4 :Quick Start Guide
5 :Safety Guide
2. Names of Parts
L
1
2
3
4
5
6
LR
1 :( + ) button
2 :(
– ) button
3 :( ) button
4 :Micro-USB port
5 :LED indicator
6 :Microphone

En
3
3. Charging the batteries
The unit’s battery must be recharged before use.
The accessory micro-USB cable must be used for recharging the unit’s battery.
Connect the appropriate connector on the accessory micro-USB cable to the
micro-USB port on the headphones, and the USB plug on the other end to a
USB port on a computer.
• When recharging begins, the LED indicator on the headphones will light red.
• If recharging is performed with the unit’s power turned ON, the power will auto-
matically turn OFF. The unit cannot be used during recharging.
• Full recharging requires about 4 hours; when recharging is completed, the LED
indicator will turn off.
• With a full battery charge, the maximum continuous usable time is about 15
hours.
• When the rechargeable battery’s power become low, a beeping sound can be
heard from the unit once every 3 minutes, and the LED indicator flashes red. In
this case, recharge the battery before using the unit.
Note
• Battery recharging time and usable battery time may vary depending on ambient
temperature and frequency of use.
• Do not place metal objects near the headphones’ charging contacts, since dan-
gerous electrical shorts or abnormal heating may result.
Notes on battery charging
• This device cannot be used during charging.
• Battery performance is influenced by the surrounding temperature. Charge the
supplied rechargeable batteries within a temperature range of 10 to 35 degrees
celcius.
• Do not overcharge batteries. In order to protect batteries, do not repeatedly
charge the batteries that are already fully charged.
• Batteries become slightly warm when charging. This is not a malfunction.
• Please use the accessory micro-USB cable for recharging; using other cables
may result in malfunction.
• Recharging may not be possible if computer is in power-saving mode.
• Always confirm the proper shape and orientation of the micro-USB cable plugs
before attempting to connect to the headphones and computer.
• Do not use micro-USB cables when tightly twisted or bundled, since fire or elec-
tric shock might result.
• If you do not plan to use this product for an extended period, avoid storing it in a
hot or humid location (such as in a vehicle or in direct sunlight). Storage in such
locations may degrade the rechargeable battery and shorten the usable time.
• If you do not plan to use this product for an extended period, charge it for approx-
imately one hour before storing it. Long periods of storage with a full battery
or without any charge may degrade the rechargeable battery and shorten the
usable time.

En
4
4. Pairing
Pairing must be performed before the headphones can be used to listen to music
or communicate using a Bluetooth device.
For further details regarding the pairing procedure, consult the user’s manual for
your Bluetooth device.
(1) While the power of the unit is off, hold down the ( ) button until the
unit enters pairing mode.
• The pairing mode is confirmed by the LED indicator’s alternately flashing blue
and red.
Release the ( ) button after confirming that the LED indicator is alternately
lighting blue and red.
• When in the pairing mode, if pairing is not completed within about 5 minutes,
the power will automatically turn off.
(2) Turn on the power to the Bluetooth device you wish to pair with, and
begin pairing; search for this unit (wireless headphones) from the paired
Bluetooth device.
• Set the Bluetooth device close (within one meter) to the wireless headphones.
• These wireless headphones will appear in the Bluetooth device’s display as
“SE-MJ553BT”.
(3) Conrm that pairing has been successfully completed with the Bluetooth
device.
• Look at the display for the Bluetooth-enabled device and select “SE-MJ553BT”.
• When the LED lamp is flashing in blue slowly about once every 3 seconds, pair-
ing is complete. When it is flashing quickly about once every second, pairing is
not complete.
• The PIN code for these wireless headphones has been factory set at “0000”.
Input this code if requested by the Bluetooth device.
Connect to the Bluetooth device
• Confirm that the power to the wireless headphones is ON before connecting to
the Bluetooth device.
• Depending on the device, connection between the wireless headphones and
Bluetooth device may be effected automatically after pairing.
Disconnecting from the Bluetooth device
• Hold down the ( ) button until the flashing LED lamp turns off and the power of
the device turns off.
Note
• Depending on the device connected, the A2DP profile may need to be des-
ignated when playing music, and the HFP or HSP profiles for hands-free
communication.
• For details regarding operating and setting methods, consult the user’s manual
for the Bluetooth device.
• When a connection with the device becomes no longer possible, perform paring
again.
• These wireless headphones can record pairing information for up to 8 Bluetooth
devices. If pairing is performed for a ninth device, the information for the first
paired device will be overwritten and lost. If you wish to reconnect to that device
on a subsequent occasions, it will be necessary to repeat pairing with that
device.
• Whenever using a device with which pairing has been performed, first turn on
the power to the wireless headphones, then perform the connection operation
for the paired Bluetooth device.

En
5
5. Enjoying music
To use the wireless headphones to listen to music from a Bluetooth device, you
must first perform pairing with the Bluetooth device using the A2DP audio profile.
For details on how to perform pairing, see P.4.
(1) With power to the wireless headphones’ turned off, hold the ( ) button
depressed for about three seconds.
The headphones’ power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to.
When pairing is completed, the wireless headphones will automatically connect
to the Bluetooth device.
*If automatic connection is not achieved, or the headphones automatically connect
to a different Bluetooth device than the one you wish to use, follow the instructions
for the desired Bluetooth device regarding manual connection.
Controls when listening to music
If the connected Bluetooth device supports AVRCP, the following operations can be
used.
• ( + ) button
Press once : Advance to next track or chapter.
Press and hold : Increase volume.
• (
– ) button
Press once : Return to beginning of track or chapter.
Press and hold : Decrease volume.
• () button
Press once : Play/Pause.
*When sound volume is set to maximum or minimum levels a beep sound will be
produced from the headphones.
*Sound volume can be adjusted on the matching Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, the controls
noted above and controls on the Bluetooth device may not be supported.
*Depending on the specifications of the connected Bluetooth device, the music
playback settings may need to be configured. Consult the user’s manual for the
Bluetooth device.
*Depending on the specifications of the connected Bluetooth device, a music play-
back application may start automatically or the music cannot be paused/played.
Consult the user’s manual for the Bluetooth device.