Page 3For technical questions, please call 1-888-866-5797.Item 60536
SAFETYOPERATIONMAINTENANCE SETUP
IMPORTANT SAFETY INFORMATION
1. Study, understand, and follow all instructions
before operating this device.
2. Do not exceed rated capacity.
3. Use only on a hard, level surface
capable of supporting the load.
4. Center load on lift platform.
5. Lift only those areas of the vehicle
specified by its manufacturer.
6. Immediately after lifting load, ensure lift
mechanical load-holding means is engaged.
7. Before moving, lower the load to
the lowest possible point.
8. Secure load with appropriate restraint device.
9. Failure to heed these markings may result in
personal injury and/or property damage.
10. Use of this product is limited to lifting, lowering,
transporting, and storing, in the lowered
position, loads consisting of a single vehicle
whose lift points are compatible with the lift
platform. Incompatibility is evident when the
loaded vehicle wobbles, appears unstable, and/
or does not securely engage the lift platform.
11. Restraining an incompatible load will not make the
load secure and may cause unexpected loss of load.
12. Never work on, around, or under a load
that is not secured and stable.
13. Keep operator’s and bystander’s head,
hands, and feet away from the lift
arms when raising and lowering.
14. No alterations shall be made to this product.
15. Only attachments, restraints, or adapters
supplied by the manufacturer shall be used.
16. Do not adjust safety valve.
17. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
18. Lower load slowly.
19. Do not use for aircraft purposes.
20. Inspect before every use; do not use
if parts are loose or damaged.
21. Stay alert. Watch what you are doing, and use
common sense when operating a Lift. Do not use
Lift while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while
operating lifts may result in serious personal injury
22. Never allow anyone to ride Lift when it is being raised,
lowered, or while holding an ATV or motorcycle.
23. Before use, read manufacturer’s instruction
manual for the ATV or motorcycle being lifted.
24. Store idle Lift out of reach of children and
other untrained persons. Lifts are dangerous
in the hands of untrained users.
25. Lift service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
26. When servicing the Lift, use only identical
replacement parts - refer to attached, product-
specific parts lists and diagrams. Follow instructions
in the “Maintenance and Servicing” section of this
manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
27. Maintain labels and nameplates on the Lift. These
carry important information. If unreadable or missing,
contact Harbor Freight Tools for a replacement. The
warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations that may occur. The operator
must understand that common sense and
caution are factors, which cannot be built into this
product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
